PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Development perspectives of on board diagnostic system in light of new approvals of vehicles

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The first rules of on board diagnostic were published in 1981. The standard had been improved in the next years, until the condition of today and also in the future, which result is presently used OBD II system, and in the close future - OBD III. On-board diagnostic system – OBD II is present in most passenger and utility vehicles in USA; the idea originated on the turn of 70-ties and 80-ties. It was dictated by the willingness to control engine functions and to diagnose related subassemblies. One of the methods to reduce emission of toxic components is continuous control over engine elements that are directly or indirectly responsible for level of emission of these components. Introduction of these requirements caused creation of the self-diagnostic definition and utilising innovation definition self-diagnostic: All the diagnostic devices have been designed according to main goal of the OBD standard, i.e.: one connector – one cable – one device – all diagnostic data now and in the future. In my paper I would like to present our results of investigations the level implementation diagnostic procedures (monitors) in vehicles (equip in SI and CI engines) with new approvals in Poland and basic terms in OBD system and OBD standards.
Słowa kluczowe
Twórcy
autor
  • Politechnika Poznańska Instytut Silników Spalinowych i Podstaw Konstrukcji Maszyn ul. Piotrowo 3, 60-965 Poznań
autor
  • Politechnika Poznańska Instytut Silników Spalinowych i Podstaw Konstrukcji Maszyn ul. Piotrowo 3, 60-965 Poznań
Bibliografia
  • [1] Merkisz J., Mazurek S: „Pokładowe systemy diagnostyczne pojazdów samochodowych”, Wydawnictwo Komunikacji i Łączności - Warszawa 2002.
  • [2] ECE Reg No.83.05 (E/ECE/324-E/ECE/TRANS/ 5051 Rev.l/Add.82/Rev.l, provisions concerning the approval of vehicles with regard to the emission of pollutants according to engine fuel requirements.
  • [3] ECE Reg No.84.00 (E/ECE/324-E/ECE/TRANS/ 505 Rev.l/Add.83): Uniform provisions concerning the approval of power-driven vehicles equipped with internal combustion engines with regard to the measurement of fuel consumption.
  • [4] Bielaczyc P., Gis W., Merkisz J.: Automotive vehicles with European On Board Diagnostic System (EOBD) examined in Poland for type approval”, 6lh International Symposium on Advanced Vehicle Control - AVEC 02, September 9-13 2002, Hiroshima, Japan.
  • [5] Gis W., Merkisz J., Ślęzak M.: “On-Board Diagnosticc Systems in motor vehicles in Poland“, Paper represented on Third Intnational Conference Transbaltica - 01, April 19- 20, 2001, Vilnus, Lithuania.
  • [6] Mazurek S., Merkisz J.: „Automotive Vehicles On Board Diagnostic Systems - Basic Objectives and Rewuirements of Norm OBD II”, KONES 1999, Poland.
  • [7] Bielaczyc P., Merkisz J.: „Investigation of Exhaust Emission from DI Diesel Engine during Cold and Warm Start”, SAE Paper No. 2001-01-1260.
  • [8] Walsh M.P.: “Global Tmds in Diesel Emission Regulations - A2001 Update”, SAE Paper 2001-01-0183.
  • [9] Gis W. “Emisssion of Polluting Substances and Fuel Consumption by Automotive Vehicles and Mopeds in Poland, Examined for “Approval of Type”, SAE Paper 980684.
  • [10] AVL Consulting & Infrmation: “Cuurent and Future Exhaust Emission Legislation”, Graz 2002,
  • [11] Directive 98.69/EC of the European Parliament and of the Council.
  • [12] Bochacz Ray T.: “The workings of OBD II it’s effect on modifications” - www.dakota- truck.net
  • [13] Service materials:”On Board Diagnosis System II in VW Nes Beetle (USA)”, Design and functions.
  • [14] Merkisz J.: “On board diagnostic system OBD II/EOBD as a assessement tool technical condotion vehicles” Diagnostyka a BRG, 25.05.2001 Poznań, Poland, pag 37-57.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BUJ7-0007-0009
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.