Tribological properties of multilayered vacuum coating

• Autorzy: Rogachou A. , Popov A. , Piliptsov D. , Yarmolenko M. , Rogachev A. , Fedosenko N.
• Konferencja: 8th International Conference on Global Research and Education – Inter-Academia 2009
• Języki publikacji: EN

Abstrakty

EN

The results of studies show the deposition conditions of the titanium-nitride based coatings and their structure influence on the tribological characteristics of the dry friction and in the diesel fuel. Tribological characteristics of multilayered systems on the basis of diamond-like coatings (DLC) have been studied. The deposition of the systems onto small-size cutting tools is found efficient for improving their service characteristics. When depositing the coatings to the cutting tool surface the microrelief of edges is not distorted and the service life increases 1.3 - 1.5 times. The morphology and tribological behaviour of composite and multi-layer polymer coatings based on polytetrafluoroethylene (PTFE) and polyurethane (PU) are studied after deposition by means the method of electron beam dispersion. It is shown possibility to produce fine-film systems based on polyurethane with polytetrafluoroethylene as filler that possess high tribological performance.

Słowa kluczowe

EN

diamond-like coatings; polytetrafluoroethylene; polyurethane; friction

• Wydawca: Łukasiewicz Industrial Research Institute for Automation and Measurements PIAP
• Czasopismo: Journal of Automation Mobile Robotics and Intelligent Systems
• Rocznik: 2009
• Tom: Vol. 3, No. 4
• Strony: 115--117
• Opis fizyczny: Bibliogr. 5 poz., rys.

Twórcy

autor

Rogachou A.

autor

Popov A.

autor

Piliptsov D.

autor

Yarmolenko M.

autor

Rogachev A.

autor

Fedosenko N.

• Francisk Skorina Gomel State University, Sovetskaya Str. 104, 246019, Belarus,

Bibliografia

• [1] Matsevityi V.M., Lyubchenko A.P., Kazak I.B., Journal of Friction and Wear, vol. 4, no. 17, 1996, pp. 93-96. (in Russian)
• [2] Rogachev A.V., Yarmolenko M.A., Tszyan Syao Hun,Lude Lu, no. 2, vol. 25, Journal of Friction and Wear, 2004, pp. 74-77. (in Russian)
• [3] Rogachev A.V., Kazachenko V.P., Schebrov A.V.,Collection of Papers: Polycom-98, Gomel, 1998, pp. 59-65. (in Russian)
• [4] Popov A.N., Rogachev A.V., Kazachenko V.P., Abstracts of Intern. Scientific Conf. "Materials and Technologies -2000", Gomel, 2000, pp. 79-80. (in Russian)
• [5] Rogachev A.V., Popov, Kazachenko V.P., Sidorskii S.S., Materials, Technologies and Tools , no. 2, vol. 5, 2001, pp. 77-80. (in Russian)