Measurement of drop size distribution in fuel sprays by laser methods

• Autorzy: Jankowski A. , Sandel A. , Jankowska-Siemińska B. , Sęczyk J.
• Języki publikacji: EN

Abstrakty

EN

Results of atomized fuel spray parameters measurement are presented in this paper, for an injector applied in common rail systems of CI engines as well as for an air-assist type petrol atomizer compared with a conventional petrol one. The measurements were carried out with the use of a dynamic, laser Doppler particle size and velocity analyzer (LDV and PDPA). It is shown that the both injection systems examined are capable of producing very fine atomization. The measuring set-up and equipment are described.

• Wydawca: Łukasiewicz Research Network - Institute of Aviation ; European Science Society of Powertrain and Transport KONES Poland ; Wydawnictwo Instytutu Technicznego Wojsk Lotniczych
• Czasopismo: Journal of KONES
• Rocznik: 2001
• Tom: Vol. 8, No. 3-4
• Strony: 334--345
• Opis fizyczny: Bibliogr. 21 poz., rys.

Twórcy

autor

Jankowski A.

• Institute of Aeronautics, 02-256 Warsaw, AI. Krakowska 110/114, Poland, tel.: [phone];fax.: [phone]

autor

Sandel A.

• The National Automotive Center, Warren, MI 48397-5000, USA

autor

Jankowska-Siemińska B.

• Institute of Aeronautics, 02-256 Warsaw, AI. Krakowska 110/114, Poland, tel.: [phone];fax.: [phone]

autor

Sęczyk J.

Bibliografia

• 1. Arndt P., Putz W.: Der neue Vierzylinder-Dieselmotor OM 611 mit Common Rail-Einspritzung. MTZ, 12/1997.
• 2. Bachało W. D.: Injection, Dispersion and Combustion of Liquid Fuels. 25 th Symposium (International) on Combustion/The Combustion Institute, 1994.
• 3. Będziński R., Jankowski A., et al.: Application of Modern Optical Methods in Experimental Investigation of Phenomena Occurring in Internal Combustion Engines. Journal of Polish CIMAC. Vol.1, No.1, Warsaw, 1994.
• 4. Cooperative Emissions Programs Grow. Technology Today. March 1994.
• 5. Fraidl G. K., Piock W. F., Wirth M.: Gasoline Direct Injection: Actual Trends and Future Strategies for Injection and Combustion Systems. SAE Paper 960465, 1996.
• 6. Hochstadt H., Arnall D : To DI for „Homogenous Charge is the Best Way to Provide the Highest Engine Power.“ Engine Technology International. January 2001, Issue 4/00.
• 7. Hoffman K., Hummel K., Maderstein T., Peters A.: Das Common-Rail Einspritzsystem ein neues Kapitel der Dieseleinspritztechnik. MTZ, 10/1997.
• 8. Jankowski A., Sęczyk J., Siwiec S.: LDV Measurement of the Flow Field in the Swirl Chamber with Combustion. Proceedings of 3rd Japan-Central Europe Joint Workshop... Bratislava, Slovakia, 1998.
• 9. Jankowski A., Sęczyk J., Wolański P.: The Preliminary Investigations of Fuel Injection with Air Assisted Injector in Constant Volume Bomb (in Polish). Proceedings of International Scientific Conference on Internal Combustion Engines “KONES’93”. Gdańsk-Jurata, 1993. ISBN 83-900666-1-0.
• 10. Jankowski A., Sęczyk J., Zbierski K.: Measurement of the Structure Fuel Spray Produced with the Common Rail System (in Polish). Journal of KONES. Vol. 7, No. 1- 2, Warsaw-Lublin, 2000. ISBN 83900666-6-3, ISSN 1231-4005.
• 11. Jankowski A.: An Investigation of the Mixture Preparation by Laser Doppler Method (in Polish). Journal of KONES. Vol. 2, No. 1, Warsaw-Poland, 1995. ISBN 83900666- 4-5, ISSN 1231-4005.
• 12. Jankowski A.: Investigation of jhe Fuel Injection Process in the Constant Volume Chamber (in Polish). Journal of KONES. Vol.2, No.l, Warsaw-Lublin, 1994. ISBN 83- 900666-3-7, ISSN 1231-4005.
• 13 Jankowski A.: Laser Doppler Measurements of the Spectrum of the Atomized Fuel Spray Generated by a Low-Pressure Injector (in Polish). Journal of KONES. Vol. 5, No. 1, Warsaw-Gdansk, 1998. ISSN 1231-4005.
• 14 Krenkiel D.: Diesel Injection Systems to meet Future Emission Levels. XXIII International Scientific Conference on Combustion Engines “KONES’97”. Bielsko- Biała, 1997.
• 15 Lefebvre A. H.: Atomization and Sprays. Hemisphere Publishing Corporation. New York, 1989.
• 16. Lefebvre A. H.: The Role of Fuel Preparation in Low-Emission Combustion. Transactions of the ASME. Journal of Engineering for Gas Turbines and Power. Vol. 117, October 1995.
• 17. Maly R. R.: State of the Art and Future Needs in S. I. Engine Combustion (Invited Topical Review). 25th Symposium (International) on Combustion/The Combustion Institute, 1994.
• 18. Su T. F., Chang C. T., Warrick C. B., Farrell P. V.: Recent Measurements of Fuel Injection System. Journal of KONES. Vol. 2, No.1. Zakopane, 1996. ISSN 1231-4005, ISBN 83-900666-5-3.
• 19. Su T., Coil M. A., Farrell P. V.: Two-Dimensional Optical Methods for Spray Diagnostics. Journal of KONES. Vol. 2, No.1, Warsaw-Lublin, 1994. ISBN 83-900666-3-7, ISSN 1231-4005.
• 20. Zbierski K.: Study of Time Histories of Fuel Pressures and Movements of Nozzle Needle in Injection Systems of Compression Ignition Engines (in Polish). Scientific Bulletin of Łódź Technical University. Nr 850, Łódź, 2000. ISSN 0137-4834.
• 21 Zhao H., Ladommatos N.: Optical Diagnostics for In-Cylinder Mixture Formation Measurements in IC Engines. Progress in Energy and Combustion Science. Vol.24, No.4, 1998. Elsevier Science Ltd. ISSN 0360-1285.