Increasing service life of major parts of internal combustion engines

• Autorzy: Pikünas A. , Garbiničius G.
• Języki publikacji: EN

Abstrakty

EN

The interaction between the cylinder and the piston in the internal combustion engine under various cooling conditions and restoration of geometrical parameters of cylinders are considered. The possibilities of using more economic technologies are also analyzed, with the results of the research presented. To restore the geometric parameters a restoring repair mixture is used, which, together with the oil of a lubrication system, gets into the engine's friction couples coveringthem by a ceramic layer.

• Wydawca: Łukasiewicz Research Network - Institute of Aviation ; European Science Society of Powertrain and Transport KONES Poland ; Wydawnictwo Instytutu Technicznego Wojsk Lotniczych
• Czasopismo: Journal of KONES
• Rocznik: 2001
• Tom: Vol. 8, No. 1-2
• Strony: 342--347
• Opis fizyczny: Bibliogr. 5 poz., rys.

Twórcy

autor

Pikünas A.

• Vilnius Gediminas Technical University J.Basanaviciaus str.28, Vilnius, Lithuania,fax.: [phone]

autor

Garbiničius G.

• Vilnius Gediminas Technical University J.Basanaviciaus str.28, Vilnius, Lithuania,fax.: [phone]

Bibliografia

• [1] Patankar, S.V.: Numerical Heat Transfer and Fluid Flow, Hemisphere, New York, 1980.
• [2] Hilliard, J. C., Springer, S.G.: Fuel Economy in road vehicles powered by spark ignition engines. Plenum press, New York, 1984.
• [3] [Pikunas, A. Lietuvos kelių transporto materialinių ir energetinių sąnaudų, žalingo poveikio aplinkai bei visuomenei mažnimo problemos, Technika, Vilnius, 2000.
• [4] International Symposium Concepts 2020. Road transport, vehicles and the motor industry into the next century. Delf, the Netherlands. THO Road - vehicles research institute. 1995, 117 p.
• [5] Motor vehicle pollution. Reduction Strategies beyond 2010/Organisation for Economic Cooperation and Development. Paris: OECD, 1994. 116 p.