Analysis of fuel spray preparation for internal combustion engines

• Autorzy: Jankowski A. , Sandel A. , Sęczyk J. , Siemińska-Jankowska B.
• Języki publikacji: EN

Abstrakty

EN

In this paper the results of the drop size and its distribution in fuel spray produced by common rail and air assist systems of injection have been presented. Measuring equipment and testing have been described. The laser systems: LDV, PDPA and RSA have been applied to perform of the measurements. The results show that by applying the common rail system and air assist system can be obtain similar size dimension of droplet in injected fuel spray. Introduction of very high pressure direct injection in CI engines, GDI and air - assist systems in SI engines were beneficial from the view point of emission and fuel consumption.

• Wydawca: Łukasiewicz Research Network - Institute of Aviation ; European Science Society of Powertrain and Transport KONES Poland ; Wydawnictwo Instytutu Technicznego Wojsk Lotniczych
• Czasopismo: Journal of KONES
• Rocznik: 2002
• Tom: Vol. 9, No. 1-2
• Strony: 323--332
• Opis fizyczny: Bibliogr. 22 poz., rys.

Twórcy

autor

Jankowski A.

• Institute of Aeronautics, BK, Al. Krakowska 110/114, 02-256 Warszawa

autor

Sandel A.

• The National Automotive Center, Warren, MI 48397-5000, USA

autor

Sęczyk J.

• Institute of Aeronautics, BK, Al. Krakowska 110/114, 02-256 Warszawa

autor

Siemińska-Jankowska B.

• Institute of Aeronautics, BK, Al. Krakowska 110/114, 02-256 Warszawa

Bibliografia

• [ 1] Arndt P., Putz W.: Der neue Vierzylinder - Dieselmotor OM 611 mit Common Rail - Einspritzung. MTZ, 12/1997.
• [ 2 ] Bachalo W. D.: Injection, Dispersion and Combustion of Liquid Fuels. 25th Symposium (International) on Combustion / The Combustion Institute, 1994.
• [ 3 ] Będziński R., Jankowski A., et al.: Application of Modern Optical Methods in Experimental Investigation of Phenomena Occurring in Internal Combustion Engines. Journal of Polish CIMAC. Vol.l, No.l, Warsaw, 1994.
• [ 4 ] Cooperative Emissions Programs Grow. Technology Today. March 1994.
• [ 5 ] Fraidl G. K., Piock W. F., Wirth M.: Gasoline Direct Injection: Actual Trends and Future Strategies for Injection and Combustion Systems. SAE Paper 960465, 1996.
• [ 6 ] Hochstad H., Amall D.: To DI for „Homogenous Charge is the Best Way to Provide the Highest Engine Power”. Engine Technology International. January 2001, Issue 4/00.
• [ 7 ] Hoffman K., Hummel K., Maderstein T., Peters A.: Das Common - Rail Einspritzsystem ein neues Kapitel der Dieseleinspritztechnik. MTZ, 10/1997.
• [ 8 ] Jankowski A., Sęczyk J., Siwiec S.: LDV Measurement of the Flow Field in the Swirl Chamber with Combustion. Proceedings of 3rd Japan - Central Europe Joint Workshop. Bratislava, Slovakia, 1998.
• [ 9 ] Jankowski A., Sęczyk J., Wolański P: The Preliminary Investigations of Fuel Injection with Air Assisted Injector in Constant Volume Bomb (in Polish). Proceedings of International Scientific Conference on Internal Combustion Engines ”KONES’93”. Gdańsk - Jurata, 1993. ISBN 83- 900666-1-0.
• [ 10 ] Jankowski A., Sęczyk J., Zbierski K.: Measurement of the structure Fuel Spray Produced with the Common Rail System (in Polish). Journal of KONES. Vol.7, No. 1-2, Warsaw - Lublin, 2000. ISBN 83-900666-6-3, ISSN 1231-4005.
• [11] Jankowski A.: An Investigation of the Mixture Preparation by Laser Doppler Method (in Polish). Journal of KONES. Vol.2, No.l, Warsaw, 1995. ISBN 83-900666-4-5, ISSN 1231-4005.
• [ 12 ] Jankowski A.: Investigation of the Fuel Injection Process in the Constant Volume Chamber (in Polish). Journal of KONES. Vol.2, No.l, Warsaw - Lublin, 1994. ISBN 83-900666-3-7, ISSN 1231-4005.
• [ 13] J Jankowski A.: Laser Doppler Measurements of the Spectrum of the Atomized Fuel Spray Generated by a Low-Pressure Injector (in Polish). Journal of KONES. Vol.5, No.l, Warsaw - Gdańsk, 1998. ISSN 1231-4005.
• [ 14 ] Krenkiel D.: Diesel Injection Systems to meet Future Emission Levels. XXIII International Scientific Conference on Combustion Engines ”KONES’97”. Bielsko - Biała, 1997.
• [ 15 ] Lefebvre A. H.: Atomization and Sprays. Hemisphere Publishing Corporation. New York. 1989.
• [ 16 ] Lefebvre A. H.: The Role of Fuel Preparation in Low - Emission Combustion. Transactions of the ASME. Journal of Engineering for Gas Turbines and Power. Vol. 117, October 1995.
• [ 17 ] Maly R. R.: State of the Art and Future Needs in S.I. Engine Combustion (Invited Topical Review). 25th Symposium (International) on Combustion / The Combustion Institute, 1994.
• [ 18 ] Su T. F., Chang C. T., Warrick C. B., Farrel P. V.: Recent Measurements of Fuel Injection System. Journal of KONES. Vol.2, No.l, Zakopane, 1996. ISBN 83-900666-5-3, ISSN 1231- 4005.
• [19 ] Su T. F., Coil M. A., Farrel P. V.: Two-Dimensional Optical Methods for Spray Diagnostics. Journal of KONES. Vol.2, No.l, Warsaw - Lublin, 1994. ISBN 83-900666-3-7, ISSN 1231-4005.
• [ 20 ] Zbierski K.: Study of Time Histories of fuel Pressures and Movements of Nozzle Needle in Injection Systems of Compression Ignition Engines (in Polish). Scientific Bulletin of Lódź Technical University. Nr.850, Lódź, 2000. ISSN 0137-4834.
• [ 21 ] Zhao H., Ladommatos N.: Optical Diagnostics for In-Cylinder Mixture Formation Measurement in IC Engines. Progress in Energy and Combustion Science. Vol.24, No.4, 1998. Elsevier Science Ltd. ISSN 0360-1285.
• [ 22 ] Jankowski A., Sandei A., Siemińska - Jankowska B., Sęczyk J.: Measurement of Drop Size Distribution in Fuel Sprays by Laser Methods. Journal of KONES. Vol.8, No.3-4, 2001.