PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

A New Design of a Robot Prototype for Intelligent Navigation and Parallel Parking

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Nowadays, the design of industrial vehicles and movable cars is based on the automation of their different tasks, which are currently handled by humans. These tasks, such as maneuvering robots in complex environments, require high level of precision that cannot be guaranteed by humans. Manual operations are likely to produce errors of computation and optimization of navigation and manoeuvre (left, right, veering…). In this paper, a novel prototype of a well-structured robot for intelligent navigation and parallel parking applications is presented. The robot have two axels, the front one is composed of two wheels that are manoeuvred by a stepper motor, and a pinion rack system for controlling the rotation of the wheels, and also the orientation of the robot. The driving wheels are mounted in the rear axle of the robot and are commanded by two DC motors. The design allows modification of the robot structural components whenever required. In addition to the mechanical components, the prototype is equipped with a DC power supply, three infra-red sensors, one ultrasound sensor, and control modules composed of an FPGA card, microcontroller card and two cards which are responsible for commanding actuators. The parameters of the mechanical and electronics components are optimised to perform multiple tasks for training and instruction applications. A mathematical model that describes the dynamics of the robot prototype is also developed. Simulation, experimental and theoretical investigations were carried out consisting in navigation and parallel parking manoeuvres. It was confirmed that the experimental and theoretical results agree well in both applications.
Słowa kluczowe
Twórcy
autor
autor
Bibliografia
  • [1] Hagras H.A., “A hierarchical Type-2 Fuzzy Logic Control Architecture for Autonomous Mobile Robots”,IEEE Transactions on Fuzzy Systems, vol. 12, no. 4, 2004, pp. 524-539.
  • [2] Simon X. Y., Hao L., Max Q.-H. M., Peter X. L., “An Embedded Fuzzy Controller for a Behavior-Based Mobile Robot with Guaranteed Performance”,IEEE Transactions on Fuzzy Systems, vol. 12, no. 4, 2004, pp. 436-446.
  • [3] Meng J. E., Chang D., “Obstacle Avoidance of a Mobile Robot Using Hybrid Learning Approach”,IEEE Transactions on Industrial Electronics, vol. 52, no. 3, 2005, pp. 898-905.
  • [4] Tsui W., Masmoudi M.S., Karray F., Song I., Masmoudi M., “Soft Computing Based Embedded Design of an Intelligent Wall/Lane Following Vehicle”,IEEE/ASME Transactions on Mechatronics, vol. 13, 2008 Issue1, pp. 125-135.
  • [5] Masmoudi M.S., Tsui W., Song I., Karray F., Masmoudi M., Derbel N., “Implementation of a Real-Time FPGABased Intelligent Parallel Parking System”,Journal of Advanced Computational Intelligence and Intelligent Informatics, JACIII, HNICEM 2007 Special Issue, vol. 12, no. 4, 2008, pp. 348-354.
  • [6] Kesselman G., Ng A., Nowostawski J., “Design and Implementation of a Vehicle Trailing Control System”,Rodolfo Reyes, 2003, www.mts.net/~png/Thesis/Pro-posal.pdf.
  • [7] Fitzpatrick P., “Behaviour-Based Control in Mobile Robotics”,University of Limerick, Ollscoilluimnigh, Limerick, Ireland. Available at: http://people.csail.mit.edu/paulfitz/pub/fitzpatrick96behaviour.pdf
  • [8] Shih J.C., Tzuu H.S.L., “Design and Implementation of Fuzzy Parallel Parking Control for a Car-Type Mobile Robot”,Journal of Intelligent and Robotics Systems , vol. 34, no. 2, 2002, pp. 175-194.
  • [9] Gómez-Bravo F., Cuesta F., Ollero A., “Parallel and Diagonal Parking in Nonholonomic Autonomous Vehicles”,Engineering Applications of Artificial Intelligence , vol. 14, no. 4, 2001, pp. 419-434.
  • [10] Divelbiss A.W., Wen J.T., “Trajectory tracking control of a car-trailer system”,IEEE Transactions. Control System Techno, vol. 53, 1997, pp. 269-278.
  • [11] Leitch D., Probert P.J., “New Techniques for Genetic Development of a Class of Fuzzy Controller”, IEEETransactions. on Systems Man Cybernet, vol. 28, 1998, pp. 112-123.
  • [12] Lian K.Y., Chin C.S., Chiang T.S., “Parallel Parking a Car-Like Robot Using Fuzzy Gain Scheduling”. In: Proc. of 1999 IEEE Internat. Conf. on Control Applications, vol. 2, 1999, pp. 1686-1691.
  • [13] Lyon D., “Parallel Parking with Curvature and nonholonomic constraints”. In:Proc. of '92, Symposium on Intelligent Vehicles, Detroit, MI, 1992, pp. 341-346.
  • [14] Ohkita M., Mitita H., Miura M., Kuono H., “Travelling Experiment of an Autonomous Mobile Robot for a Flush Parking”. In: Proc. of the 2 IEEE Conf. on Fuzzy Systems, San Francisco, CA, USA, vol. 2, 1993, pp. 327-332.
  • [15] Paromtchik I.E., Laugire C., “Motion Generation and Control for Parking an Autonomous Vehicle”. In:Proc. of '96 IEEE Conf. on Robotics and Automation, Minneapolis, MN, vol. 4, 1996, pp. 3117-3122.
  • [16] De Santis R., “Path-Tracking for Car-like Robots with Single and Double Steering”,IEEE Trans. Veh. Technol, vol. 44, no. 2, 1995, pp. 366-377.
  • [17] Stotsky A., Hu X., “Control of Car-Like Robots Using Sliding Angle Observers for Steering Angle Estimation”. In: Proc. of 36 Conf. on Decis. Control, vol. 4, 1997, pp. 3648-3653.
  • [18] Yang S., Meng M., “Real-Time Collision Free Motion Planning of a Mobile Robot Using a Neural Dynamics Based Approach”,IEEE Trans, Neural Netw , vol. 14, no. 6, 2003, pages 1541-1552.
  • [19] Hodgkin A.L., Huxley A.F., ”A quantitative description of membrane current and its application to conduction and excitation in nerve”,Amer. J. Physiol , vol. 117, 1952, pp. 500-544.
  • [20] Zalama E., Gomez J., Paul M., Peran J.R., “Adaptive behaviour navigation of a mobile robot”,IEEE Trans. Syst. Man Cybern. Part A: Syst. Humans, vol. 32, no. 1, 2002, pp. 160-169.
  • [21] Krohling R., Zhou Y., Tyrrell A., ”Evolving FPGA-based robot controllers using an evolutionary algorithm”,First Int. Conf. on Artificial Immune Systems ICARIS'02, University of Kent, Canterbury, UK, 9 -11 September 2002. ISBN 1902671325, 9781902671321.
  • [22] Fakhfakh T., Chaari F., Haddar M., “Numerical and Experimental Analysis of a Gear System with Teeth Deffects”,International Journal of Advanced Manufacturing technology vol. 25, no. 5-6, 2005, pp. 542-550.
  • [23] Abdelmoula C., Masmoudi M., “Robot Mobile ŕ Usage d'Applications Universelles et Didactiques”,,Brevęt d'Invention INNORPI , June 2008.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BUJ6-0028-0007
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.