PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Surface Structure and Catalytic Properties of Cu/SiO2 Catalysts Prepared by Different Methods

Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The silica supported copper catalysts were prepared via impregnation (IM), solgel (SG) and deposition precipitation (DP) methods. The catalysts were characterized by XRD, H2-TPR, NH3-TPD, H2-N2O titration, XPS, BET and EPR techniques. The results indicated that two copper species, Cu2+ and Cu0 exist on the surface of SG catalyst; how ever, only Cu0 species could be found on the surface of reduced IM and DP catalysts, and the dispersion of Cu0 on IM catalyst was better than that on DP catalyst. According to the reaction results, Cu0 should be the active sites for dehydrogenation of cyclohexanol. Cu2+ species on the surface of SG catalyst might be responsible for the dehydration of cyclohexanol. The residual Na was found on the surface of DP catalyst, which made the acidity decreas ing, and the Cu crystallite growing up easily.
Słowa kluczowe
Rocznik
Strony
1097--1104
Opis fizyczny
Bibliogr. 31 poz., rys.
Twórcy
autor
autor
autor
autor
autor
autor
autor
autor
Bibliografia
  • 1. Mohammad I. and Ikramullah H., Catal. Commun., 5, 1 (2004).
  • 2. Liu J.J., Xu 7... Yuan Z.Y., Lu D., Chen W. and Zhou W., Catal. Lett., 72. 203 (2001).
  • 3. Cesar D.V.. Perez C.A., Salim V.M.M. and Schmal M., Appl. Catal., A. 176. 205(1999).
  • 4. Lin Y.M. Wang M. and Yeh C.T., Appl. Catal., 41.53 (1988).
  • 5. Nagaraja B. M., Kumar V.S., Shashikala V. Padmairi A.H. Reddy S.S, Raju B.D and Rao K.S.R., J. Mol. Catal. A. 223, 339 (2004).
  • 6. Fridman V.Z. and Davydov A.A., J. Catal. 195. 20 (2000).
  • 7. Chang H.F. and Saleque MA. Appl. Catal. A. 103. 233 (1993).
  • 8. Chang H.F., Saleque M.A.. Hsu W.S. and Lin W. H., J. Mol. Catal. 94. 233 (1994).
  • 9. Chang H.F., Saleque M.A., Hsu W.S. and Lin W.H.,J. Mol. Catal. A., 109. 249(1996).
  • 10. Chang H.T. and Saleque M.A., J. Mol. Catal., 88. 223 (1904).
  • 11. Jeon G.S. and Chung J.S., Appl. Catal. A., 115,29(1994).
  • 12 Chen W.S . Lee M.I. and Lee J. F., Appl. Catal. A, 83, 201 (1992).
  • 13. Chary K.V.R., Sagar G.V., Naresh D., Seela K.K. and Sridhar B., J. Phys. Chem. B, 109,9437(2005).
  • 14. Chary K.V.R , Seela K.K., Sagar G.V. and Sreedhar B., J. Phys. Chem. B. 108.658(2004).
  • 15. Takahashi R., Sato S., Sodesawa T. and Kalo M J., Sol-Gel Sci. Technol., 19,715(2000).
  • 16. Monti D.M..CantN.W..Trimm D.L. and Wainwright M.S., J. Catal., 100, 17 (1986).
  • 17. Okamoto Y., Fukino K., Imanaka T. and Teranishi S., J. Phys. Chem., 87, 3740(1983).
  • 18. Garbassi F. and Petrini G., J. Catal.,90, 113 (1984).
  • 19. Vijayaraj M. and Gopinath C.S., J. Catal., 241. 83 (2006).
  • 20. Sermon P.A., Rollins K., Reyes P.N., Lawrence S.A., Luengo M.A.M. and Davies M.J., J. Chem. Soc. Faraday Trans. , 183. 1347 (1987).
  • 21. Garcia C.L. and Resasco D.F., Appl. Catal. ,46, 251 (1989).
  • 22. Centi G., Peralhoner S., Biglino D. and Giamello E., J. Catal., 152. 75 (1995).
  • 23. Deen R., Scheltus P.I.T. and Vries Q., J. Catal., 41, 218(1976).
  • 24. Blanco J., Fayos J., Gracia De La Banda J F. and Soria J., J. Catal., 31. 257 (1973).
  • 25. Marchi A.J., Fierro J.L.G., Santamaria J. and Monzon A., Appl. Catal. A, 142, 375 (1996)
  • 26. Shiau C.Y. and Lee Y.R., Appl. Catal. A, 220, 173(2001).
  • 27. Jun K.W., Shen W.J., Rao K.S. R. and Lee K.M., Appl. Catal. A, 174.231 (1998).
  • 28. Pepe I., Angeletti C., Rossi S.D. and Jacono M.L., J. Catal., 91. 69 (1985).
  • 29. Cunningham J., Sayyed G.H.A., Cronin J.A.. Fierro J.L.G.. Healy C. Hirschwald W., Ilyas M and Tobin J.P., J. Catal. 102, 160 (1986).
  • 30. Uemichi Y., Shouji K., Sugioka M. and Kanazuka T., Bull. Chem. Sue Jpn., 68, 385 (1995).
  • 31. Resende N.S., Nele M. and Salim V.M.M., Thermochim. Acta, 451, 16(2006).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BUJ6-0024-0120
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.