Oxidative Polymerization Studies of 8-Hydroxyquinoline in Different Media

• Autorzy: Ahmed S. M. , Ahmed S. A.
• Języki publikacji: EN

Abstrakty

EN

Oxidative polymerization reaction of 8-hydroxyquinoline (HQ) in different media has been studied experimentally by spectrophotometric technique and confirmed computationally by molecular mechanics (MM+) calculations. MM+ calculations showed that the PE of the optimum molecular geometric (OMG) of the anionic HQ (HQ-NaOH) form is about two (1.985) times greater than the PE in the protonated (HQ-HCl) form. PE of the OMG structure of the PHQ was computed (-30.651 kJ mol-1). These calculations indicate that the matrix is highly stable. The oxidation constant (Kox) of the anionic form (HQ-NaOH) is about twice (2.02) greater than that of the protonated (HQ-H2SO4) form. The proposed procedure was success fully applied for the oxida tion of diiodohydroxyquinoline in streptoquin (SQ) (anti-di ar rhea, tab lets). The Kox of HQ in SQ was also found to be lower than the Kox in synthetic (HQ) solution. Kinetic parameters of the oxidative polymerization of the anionic form of HQ (HQ-NaOH) were deduced on the basis of absorbance variations. The results of computer-oriented kinetic analysis indicate that the rate-controlling step of the HQ polymerization is governed by Ginstling-Bronstein equation representing the three-dimensional diffusion (D4). Activation parameters of the oxidative polymerization of the anionic form of HQ (HQ-NaOH) were computed and discussed.

Słowa kluczowe

EN

8-hydroxyquinoline; streptoquin; polymerization; MM+ calculations

• Wydawca: Polskie Towarzystwo Chemiczne
• Czasopismo: Polish Journal of Chemistry
• Rocznik: 2007
• Tom: Vol. 81, nr 12
• Strony: 2195--2205
• Opis fizyczny: Bibliogr. 35 poz., rys.

Twórcy

autor

Ahmed S. M.

autor

Ahmed S. A.

Bibliografia

• 1. Bankova M., Monlova N., Markowa N., Radoucheva T., Dilova K. and Rashkov L., Eur. Polym. J., 34, 47(1997).
• 2. Bankova M., Petrova T., Monlova N. and Rashkov I., Eur. Polym. J., 32, 569 (1996).
• 3. Kaiser E.T. and Weidman S.W., J. Am. Chem. Soc., 87, 4354 (1964).
• 4. Iyun J.F., Lawal H.M. and Olagbemiro O.T., Indian J. Chem., 14, 446 (1995).
• 5. Iyun J.F., Musa K.Y. and Ayoko G.A., Science in New Guinea, 22(1), 10 (1996).
• 6. Aulley A.M., Spencer I. and West P.R., Can. J. Chem., 63, 1198 (1985).
• 7. Morris D.F.C. and Ritter J.J., Int. J. Chem. Kinetics, 11, 1081 (1979).
• 8. Davies G. and Kustin K., Trans. Farad. Soc., 65, 1630 (1989).
• 9. Wells C.F. and Kristin L.V., J. Chem. Soc., A, 1372 (1970).
• 10. Mentasti E. and Pellizzetti E., J. Chem. Soc. Dalton, 2605 (1973).
• 11. Mentasti E., Pellizzetti E. and Saini G., J. Chem. Soc. Dalton, 2609 (1973).
• 12. Alexander F.J., Synthesis, 21, 85 (1987).
• 13. Szammer J., Jakay M. and Germasimov O.V., Int. J. Chem. Kinetics, 24, 145 (1992).
• 14. Jaky M., Kozhevnikov L.V. and Hoft E., Int. J. Chem. Kinetics, 24, 1055 (1992).
• 15. Sengupta K.K., Khamrui D.K. and Mukherjee D.C., Indian J. Chem., 13, 148 (1975).
• 16. Kamal M.M., Ahmed S.M., ShahataM.M. And Temerk M., Anal. & Bioanal. Chem., 372,843 (2002).
• 17. Ahmed S.M., Kamal M.M. and Shahata M.M., J. Inorg. & Organometal. Polym., 13 (3), 171 (2003).
• 18. Ahmed S.M., Polym. Deg. & Stab., 85, 605 (2004).
• 19. Vogel A.I., A Text Book of Quantitative Chemical Analysis, ELBS, Longman Essex, UK, 5th edition (1989) p.. 371.
• 21. Ahmed S.M. and Abu-Zied B.M., J. Anal. & Appl. Pyrolysis, 70, 277 (2003).
• 22. Burkert U. and Allinger N.L., Molecular Mechanics. ACS Monograph 177, American Chemical Society: Washington, DC, 1982.
• 23. MacKerell A.D., Jr., Feig M. and Brooks C.L., J. Comp. Chem., 25, 1400 (2004).
• 24. Gasteiger J. and Marsili M., Tetrahedron, 26, 3219 (1980).
• 25. Jorgensen W.L., Maxwell D.S. and Tirado-Rives J., J. Am. Chem. Soc., 117, 11225 (1996).
• 26. MillerK.,y. Am. Chem. Soc., 112, 8533 (1990).
• 27. Ruengsitagoon W, Liauruangrath S. and Townshend A., Talanta, 69, 976 (2006).
• 28. Ghandour M.A., El-Shatoury S.A., Aly A.M.M. and Ahmed S.M., Analyt. Lett., 29, 1431 (1996).
• 29. Harihar A.L., Kembhavi M.R. and Nandibewoor S.T., Indian J. Chem., 39A, 769 (2000).
• 30. Jtang Y.J., Zhou L.M., Wang Q.H., Zhu D.Q. and Liu X.L., Chin. J. Anal Chem., 28, 106 (2000;
• 31. Ranganathan R., Bakhshi N.N. and Mathews J.F., Can. J. Chem. Eng., 55, 544 (1977).
• 32. Ibar J.P., Thermochim. Acta, 192, 91 (1991).
• 33. Madamba P.S., Driscoll R.H. and Buckle K.A., Food Eng., 28, 109 (1996).
• 34. Wailing C., Acc. Chem. Res., 8, 125 (1975).
• 35. Brillas E. and Sauleda R.C., J. Electrochem. Soc., 145, 737 (1998).