Tytuł artykułu
Autorzy
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
Oxygen adsorption at room temperature (RT) and 0°C and H2-O2 titration were studied by volumetric technique on a colloidal 5.1% Ru/g-Al2O3 catalyst prepared from the RuCl3×3H2O precursor by a polyol reduction method. Adsorption properties of this catalyst were compared with those of the 4.6% Ru/g-Al2O3 catalyst prepared by incipient wetness impregnation method using the same metal precursor. The colloidal catalyst, in contrast to traditionally prepared one, was free of chlorine contamination. Characterization by TEM, XRD and XPS showed high dispersion of ruthenium in both catalysts. It was found that at RT the O2 adsorption coexists to some extent with the subsurface oxidation, but at 0°C the rate of the later, activated process was very low. In spite of this, the O2 adsorption at both temperatures can be successfully used to determine the ruthenium dispersion in the colloidal Ru/g-Al2O3 catalyst. Using a stoichiometry O/Rus = 2, good agreement was obtained between the aver age ruthenium particle sizes calculated from the O2 adsorption and from TEM. The H2-O2 titration data confirm the formation of the surface oxide of stoichiometry close to RuO2. In contrast, the presence of Cl ions in the traditionally prepared Ru/g-Al2O3 catalyst decreases the capacity of Ru to O2 adsorption (O/Rus less than 2), and causes large discrepancies between the aver age particle size estimated from the O2 up take, H2 chemisorption and TEM. The XPS data revealed that mainly Ru4+ was formed at the surface of the Ru particles a ter the O2 adsorption.
Wydawca
Czasopismo
Rocznik
Tom
Strony
2181--2194
Opis fizyczny
Bibliogr. 42 poz., rys.
Twórcy
autor
- Institute of Low Temperature and Structure Research, Polish Academy of Sciences, P.O. Box 1410, 50-950 Wrocław, Poland Tel: +48 71 34-350-20, Fax: +48 71 344-10-29, J.Okal@int.pan.wroc.pl
Bibliografia
- 1. Szmigiel D., Bielawa H., Kurz M., Hinrichen O., Muhler M., Raróg W., Jodzis S., Kowalczyk Z., Znak L. and Zieliński J., J. Catal., 205, 205 (2002).
- 2. Chin S.Y., Aiexeev O.S. and Amiridis M.D., Appl Catal. A, 286, 157 (2005).
- 3. Opre Z., Grunwaldt J.D., Mallat T. and Baiker A., J. Mol. Catal. A, 242,224 (2005).
- 4. Liu H. and Iglesia E., J. Phys. Chem. B, 109, 2155 (2005).
- 5. Balint L, Miyazaki A. and Aika K., J. Catal., 207, 66 (2002).
- 6. Hadjiivanov K., Lavalley J.-C., Lamotte J., Maugé F., Saint-Just J. and Che M., J. Catal., 176, 415 (1998).
- 7. Lu K. and Tatarchuk B.J., J. Catal., 106, 166 (1987).
- 8. Kubicka H., React. Kinet. CataL Lett., 5, 223 (1976).
- 9. Berndt H. and Mttller U., Appl. Catal. A, 180, 63 (1999).
- 10. Taylor K.C., J. Catal., 38, 299 (1975).
- 11. Kubicka H. and Węglowska B., React. Kinet. Catal. Lett., 29,255 (1985).
- 12. Goodwin J.G., Jr., J. Catal., 68, 227 (1981).
- 13. Ménézo J.C., Hoang L.C., Montassier C. and Barbier J., Appl. Catal., 74, 5 (1991).
- 14. Narita T., Miura H., Sugiyama K., Matsuda T. and Gonzalez R.D., J. Catal., 103,492 (1987).
- 15. Kowalczyk Z., Jodzis S., Raróg W., Zieliński J., Pielaszek J. and Presz A., Appl. Catal. A, 184, 95 (1999).
- 16. Bradford M.C.J., Fanning P.E. and Vannice M.A., J. Catal., 172, 479 (1997).
- 17. Rossetti L, Pernicone N. and Forni L., Appl. Catal. A, 248, 97 (2003).
- 18. Uner D.O., Pruski M. and King T.S., J. Catal., 156, 60 (1995).
- 19. Okal J., Zawadzki M., Kępiński L., Krajczyk L. and Tylus W., Appl. Catal. A, 319, 202 (2007).
- 20. da-Silva J.W. and Cobo A.J.G., Appl. Catal. A, 252, 9 (2003).
- 21. Abmann J., Löffler E., Birkner A. and Muhler M., Catal. Today, 85, 235 (2003).
- 22. Over H., Kim Y.D., Seitsonen A.P., Wendt S., Lundgren E., Schmid M., Varga P., Morgante A. and Ertl G., Science, 287,1474 (2000).
- 23. Han Y.F., Kahlich M.J., Kinne M. and Behm R.J., Appl. Catal. B, 50, 209 (2004).
- 24. BuyanovaN.E., Karnaukhov A.P., KorolevaN.G., Ratner I.D. and Chernyavaskaya O.N., Kinet. Catal.,13, 1533 (1972).
- 25. Kubicka H. and Kuźnicka B., React. Kinet. Catal. Lett., 8, 131 (1978).
- 26. Masthan S.K., Chary K.YR. and Rao P.K., J. Catal., 124, 289 (1990).
- 27. Corro G. and Gomez R., React. Kinet. Catal. Lett., 12, 145 (1979).
- 28. Raróg-Pilecka W, Miśkiewicz E., Szmigiel D. and Kowalczyk Z., J. Catal., 231, 11 (2005).
- 29. Szmigiel D., Raróg-Pilecka W., Miśkiewicz E., Gliński M., Kielak M., Kaszkur M. and Kowalczyk Z.,Appl. Catal. A, 273, 105 (2004).
- 30. Szmigiel D., Raróg-Pilecka W, Miśkiewicz E., Maciejewska E., Kaszkur Z., Sobczak J.W. and Kowalczyk Z., Catal. Lett., 100, 79 (2005).
- 31. Kuo Y.-J. and Tatarchuk B.J., J. Catal., 112, 229 (1988).
- 32. Dalia Berta R.A., J. Catal., 34, 57 (1974).
- 33. Narita T., Miura H., Ohira M., Sugiyama T., Matsuda T. and Gonzalez R.D.,Appl. Catal.,2,185(1987).
- 34. Koopman P.G.J., Kieborn A.P.G. and van Bekkum H., J. Catal.,69, 172 (1981).
- 35. Stampfl C., Schwegmann S., Over H., Scheffler M. and Ertl G., Phys. Rev. Lett., 77, 3371 (1996).
- 36. Stampfl C. and Scheffler M., Phys. Rev. B, 54, 2868 (1996).
- 37. Chan H.Y.H., Takoudis Ch.G. and Weaver M.J., J. Catal., 172, 336 (1997).
- 38. Mazzieri Y, Figoli N., Pascual F.C. and Eagentiere P., Catal.Lett., 102, 79 ,2005).
- 39. Eliche-QuesadaD., Merida-Robles J.M., Rodriguez-Castellón E. and Jimenez-López A., Appl. Catal. A,279, 209 (2005).
- 40. Oukaci R., Sayari A. and Goodwin J.G., Jr., J. Catal.102, 126 (1986).
- 41. Zou W. and Gonzalez R.D., J. Catal. 133, 202 (1992).
- 42. Bartholomew C.H. and Farrauto R.J., Fundamentals of Industrial Catalytic Processes, Wiley-Inter ciences, New Jersey, p. 83 (2006).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BUJ6-0023-0091