Knowledge-based Support of Decision Making at the Example of Microtechnology

• Autorzy: Albers A. , Burkardt N. , Deigendesch T.
• Języki publikacji: EN

Abstrakty

EN

Designing products is a sequence of decisions. Especially early decisions have great impact on later product life cycle stages. The more complex products become the more information is required in order to support design when making decisions. The present contribution shows for the example of the skill-intensive technology of microsystems, what tools can be applied. First, design processes in microtechnology are presented, which depict the necessity of bringing knowledge from later product life cycle stages to the early ones. For this front loading process design rules as a methodological means of support are proposed. Further on that paper presents two tools that are based on design rules, which support the designer. The first one, wikis, open content management systems represent knowledge from later stages for design engineers. The same design rules on a formal level can be implemented into the second proposed tool, a knowledge-based engineering system.

Słowa kluczowe

EN

design process; microsystem technology; design rules; knowledge based engineering; wiki

• Wydawca: Łukasiewicz Industrial Research Institute for Automation and Measurements PIAP
• Czasopismo: Journal of Automation Mobile Robotics and Intelligent Systems
• Rocznik: 2007
• Tom: Vol. 1, No. 4
• Strony: 16--20
• Opis fizyczny: Bibliogr. 18 poz., rys.

Twórcy

autor

Albers A.

autor

Burkardt N.

autor

Deigendesch T.

• Universität Karlsruhe, Institute of Product Development, Kaiserstrasse 10, 76131 Karlsruhe, Germany, Phone: [phone], Fax: [phone],

Bibliografia

• [1] A. Albers et al., “Micro-specific Design Flow for Tool-based Microtechnologies”, in: Procs. High Aspect Ratio Micro Structure Technology Workshop, HARMST 2005, Gyeongju, Korea, 2005.
• [2] A. Albers et al., “Knowledge-based design environment for primary shaped microparts”, Microsystem Technologies, vol. 11, 2005, no. 4-5, pp. 254-260
• [3] A. Albers et al., “Design Methodology in MicroTechnology”, in: Procs. Int. Conf. on Engineering Design ICED’03, Stockholm, Sweden, 2003.
• [4] A. Albers, J. Marz, “Restrictions of Production Engineering on Micro-specific Product Development”, Microsystem Technologies, vol. 10, 2004, pp. 205-210.
• [5] A. Albers, J. Marz, “Design Environment and Design Flow”, in: Advanced Micro and Nanosystems, vol. 3, ed. by Löhe, D., Hausselt, J., Weinheim, Germany: Wiley VCH, 2005, pp.3-28.
• [6] A. Albers et al., “Wikis as a Cooperation and Communication Platform within Product Development”, in: Int. Conf. on Engineering Design ICED’07, 28-31 August 2007, Paris
• [7] R. Bruk, C. Schumer, “INTERLIDO – Web-basierte Werkzeuge für den Mikrostrukturentwurf”, Workshop Multimedia und Mikrotechnik, vol. 1 Lüinghausen, Germany, 1998, pp.82-102.
• [8] P. Buchberger et al., “MIDAS: Ein wissensbasiertes System zur Unterstüzung des fertigungsgerechten Entwurfs von LIGA-Mikrostrukturen”, in: Wissenschaftliche Berichte, no. 5843, Forschungszentrum Karlsruhe, 1997.
• [9] D. Gajski, R. Kuhn, “New VLSI-Tools”, Computer, vol. 16, 1983, no. 12, pp. 11-14.
• [10] K. Hahn, Methoden und Werkzeuge zur fertigungsnahen Entwurfsverifikation in der Mikrotechnik, Diss., Fortschritt-Berichte VDI 20, no. 286, Düseldorf, Germany: VDI-Verlag, 1999.
• [11] C. Leßmöllmann, Fertigungsgerechte Gestaltung von Mikrostrukturen für die LIGA-Technik, Diss.,Karlsruhe, 1992.
• [12] J. Marz, Mikrospezifischer Produktentwicklungsprozess (μPEP) für werkzeuggebundene Mikrotechniken, Diss., IPEK Forschungsberichte, no. 17, Karlsruhe, Germany, 2005
• [13] C. Mead, L. Conway, Introduction to VLSI Systems, 2nd ed., Reading, USA: Addison-Wesley, 1980.
• [14] VDI guideline 2206, Design methodology for mechatronic systems, Berlin, Germany: Beuth, 2004.
• [15] A. Wagener, K. Hahn, Eine Entwurfsmethodik für die Mikrosystemtechnik und Post-CMOS, Austrochip 2003, Linz, Austria, 2003.
• [16] R. A. Walker, D. E. Thomas, Model of Design Representation and Synthesis, Procs. 22nd ACM/IEEE Conf. on Design Automation, Las Vegas, USA, 1985, pp.453-459.
• [17] R. Watty, Methodik zur Produktentwicklung in der Mikrosystemtechnik, Diss., Institut für Konstruktionstechnik und Technisches Design, no. 533, 2006.
• [18] T. Gross, M. Koch, Computer-Supported Cooperative Work, München, Germany: Oldenbourg, 2006.