PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Method for Measuring Optical Parameters in Weakly Absorbing Turbid Media

Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
This article develops a simple, yet effective technique of measuring optical parameters in weakly absorbing turbid samples. Although based on diffusion theory, this technique largely relaxes its strict non-boundary and spot source requirements by choosing a suitable source-detector distance. Moreover, the technique is applicable not only to liquid samples, but also to solids or on-line measurements. Experimental results demonstrate that, measured by this method, the reduced scattering coefficients of intralipid suspensions are in good agreement with those obtained by other authors. The paper also reports on the application of this technique to scattering measurements in pulp.
Rocznik
Tom
Strony
257--267
Opis fizyczny
Bibliogr. 6 poz., rys.
Twórcy
autor
  • Department of Electrical and Information Engineering, University of Oulu and Infotech Oulu, 90014 Oulu, Finland
  • Department of Electrical and Information Engineering, University of Oulu and Infotech Oulu, 90014 Oulu, Finland
  • Meri-Lappi Institute, University of Oulu, Teollisuustie 1, 93100 Pudasjârvi, Finland
autor
  • Department of Electrical and Information Engineering, University of Oulu and Infotech Oulu, 90014 Oulu, Finland
Bibliografia
  • [1] van Staveren H. J., et al., Applied Optics 30, 1991, 4507.
  • [2] Zaccanti G., Del Bianco S., and Martelli F., Applied Optics 42, 2003, 4023.
  • [3] Bondani M., et al., Journal of Optical Society of America B 20, 2003, 2383.
  • [4] Oraevsky A. A., Jacques S. L., and Tittel F. K., Applied Optics 36,1997, 402.
  • [5] Jacques S. L., “Tissue Optics”, SPIE short course notes, San Jose, USA, 1997, 45.
  • [6] Giusto A., et al., Applied Optics 42,2003,4375.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BUJ6-0008-0020
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.