The problem of not driven propellers in Multi - screw ships propulsion arrangements

• Autorzy: Charchalis A.
• Języki publikacji: EN

Abstrakty

EN

Power requirement for ship's movement depends on their size (water displacement) and sailing speed. The problem is especially important for fast ships, because the speed of movement is generating significant high power requirement, while limited displacement, diminishing a drag quantity from one hand, is a reason of limited draft and consequently limited capacity of a hull from the other. Above facts have strong influence at a number, type, power and size of main engines and propellers. Fast ships are designed for reaching maximum speed, but majority of exploitation time, are cruising at lower speed, called partial speed. That exploitation profile requires stopping of some engines or braking of propellers. Not driven propellers are dragged behind the hull, and work at a turbine mode, giving a torque at a propulsion shaft and creates a negative thrust what means the additional drag. The additional drag of not driven propellers must be calculated during the propulsion design stage, and analysis of speed value during different variants of the ship's movement . Torque values and thrusts can be evaluated basing on the universal hydrodynamic characteristics of propellers. the method and example of calculation of the drag created by free-rotating and stopped propellers of the exemplary propulsion set are presented in the paper.

Słowa kluczowe

EN

fast ships; ships screw propeller; multi-screw propulsion arrangements

• Wydawca: Łukasiewicz Research Network - Institute of Aviation ; European Science Society of Powertrain and Transport KONES Poland ; Wydawnictwo Instytutu Technicznego Wojsk Lotniczych
• Czasopismo: Journal of KONES
• Rocznik: 2012
• Tom: Vol. 19, No. 2
• Strony: 83--86
• Opis fizyczny: Bibliogr. 7 poz., rys.

Twórcy

autor

Charchalis A.

• Gdynia Maritime University, The Faculty of Marine Engineering Morska Street 83, 81-225 Gdynia tel.: [phone], fax: [phone],

Bibliografia

• [1] Basin, J. M., Anfimov,V. N., Gidromechanika sudna, Recnoj transport, Leningrad 1964.
• [2] Basin, J. M., Miniovic, J. J., Teoria i rasciot grebnych vintov, Sudostrojenie, Leningrad 1963.
• [3] Charchalis, A., Opory okrętów wojennych i pędniki okrętowe, Akademia Marynarki Wojennej, Gdynia 2001.
• [4] Charchalis, A., Problem śrub niepracujących w okrętowych układach napędowych wielośrubowych, Zeszyty Naukowe Akademii Marynarki Wojennej, Nr 4/2010, Gdynia 2010.
• [5] Charchalis, A., Propulsion systems of fast vessels with jet turbine engines, Marine Technology Transactions, Polish Academy of Since, Vol. 4, pp. 23-33, Gdańsk1993.
• [6] Jarzyna, H., Wzajemne oddziaływanie kadłuba i pędnika statku, Maszyny Przepływowe, T. 14, Ossolineum, 1993.
• [7] Wojnowski, W., Okrętowe siłownie spalinowe cz. I, Akademia Marynarki Wojennej, Gdynia 1998.