PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Possibilities of graphical environment application for determining parameters of the mechanical system

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The article discusses the possibility of using LabView graphical environment for visualization and quick and easy identification of parameters of the dynamic system. For further analysis a human driver model, sitting in a car seat, fastened with seatbelts is used. This model consists of eight rigid solids. The solids reflect parts of the human body. In the model head and neck are separate segments. The torso is divided into three parts: upper torso, middle torso and lower torso. In this model also a leg is a separate segment. The leg is divided into three parts: thigh, lower leg and foot. The individual solids are connected by torsionally vulnerable joints. Additionally a seat back was modelled too, which limits the movement of three segments of the torso. Similarly as in the standard car with the seat equipped with a three-point safety belt, in the model presented in this article, the location of the upper and lower seat belt was modelled and shown. The whole model has two frames of reference. For this purpose, a graphical language program was developed, in which by changing the settings of analogue units representing parameters such as mass ratios, stiffness, damping, moments of inertia, it is possible to determine the impact of these parameters on the delay shapes, speed, energy, etc.
Twórcy
autor
autor
autor
  • Kielce University of Technology Department of Electrical Machines and Mechatronic Systems 1000-lecia Państwa Polskiego Av. 7, 25-314 Kielce, Poland tel.: +48 41 3424628, fax: +48 41 3424207, k.ludwinek@tu.kielce.pl
Bibliografia
  • [1] Jaśkiewicz, M., Stańczyk, T. L., The analysis of multi-section concept for an active air headrest, Polskie Towarzystwo Diagnostyki Technicznej, Diagnosytka 3(55), 2010.
  • [2] Jaśkiewicz, M., Stańczyk, T. L., The identification of damping and stiffness parameters of a driver model on the basis of crash tests, Journal of KONES Powertrain and Transport, Vol. 16, No. 1, pp. 229-238, Warszawa 2009.
  • [3] Jaśkiewicz, M., Stańczyk, T., Analysis of the concept of multiple-air active head restraint, 9th International Technical Systems Degradation Conference, pp. 36-38, Liptowsky Mikulas 2010.
  • [4] LabView. Control Design User Manual, National Instruments, June 2009.
  • [5] Ludwinek, K., Staszak, J., Possibility of graphical environment applications for evaluating of equivalent circuit parameters and time constants, Electrical Review (the article has been accepted for publication).
  • [6] Pankoke, S., Numerische Simulation des raumlichen Ganzkorperschwing-ungsverhalt-ens des sitzeden Menschen unter Berucksichtigung der individuellen Anthropometrie und Haltung, Dusseldorf 2003.
  • [7] Wicher, J., Safety of cars and road traffic, WKiŁ, Warszawa 2002.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BUJ5-0041-0017
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.