Exhaust gases measurement preparation

• Autorzy: Toporcer E.
• Języki publikacji: EN

Abstrakty

EN

The paper deals with the measurement preparation for the exhaust gases measurement. The measurement is carried out within the project of basic research. The aim of the project is the research of the influence of an unconventional charging intercooling on the selected ecological and economical parameters of a turbocharged compression ignition internal combustion engine in the specific operational conditions. The paper gives the information about the types, numbers, specification and position of the sensors used. The measuring scheme with the connection of sensors and connector blocks is also shown. The details about the single parts of the measuring chain are given. The paper also shows the view on the sensors through the photographs. Some results from a testing measurement are also shown and the results from the selected sensors can be compared. The two different intercoolers are used for charging air cooling. The first intercooler is the air/air type equipped with a ventilator, the second intercooler is the water/air type without a ventilator. The total displacement of an engine is 7.61. The measurement itself is aimed mainly to acquire information regarding the influence of the low temperatures of charging on the amount of NOx. Also the influence on the amount of particulate matter is examined through the mentioned measurement.

Słowa kluczowe

EN

measurement preparation; sensors; measuring card; measuring scheme; data acquisition

• Wydawca: Łukasiewicz Research Network - Institute of Aviation ; European Science Society of Powertrain and Transport KONES Poland ; Wydawnictwo Instytutu Technicznego Wojsk Lotniczych
• Czasopismo: Journal of KONES
• Rocznik: 2011
• Tom: Vol. 18, No. 2
• Strony: 419--426
• Opis fizyczny: Bibliogr. 9 poz., rys.

Twórcy

autor

Toporcer E.

• Univerzity of Zilina, Faculty of Mechanical Engineering Department of Automotive Technology Univerzitnd 8215/1, 010 26 Zilina, Slovakia phone: [phone], fax: [phone],

Bibliografia

• [1] Hudák, A., Barta, D., Analýza prúdenia chladiaceho média v okolí valca motora Z8004C, In: Hydraulika a pneumatika: časopis pre hydrauliku, pneumatiku a automatizačnú techniku, ISSN 1335-5171, Vol. 7, No. 1-2, pp. 52-54, 2005.
• [2] Kovalčík, A., Pressure and flow measurement in a nonconventional energetic system, In proceedings of international conference TRANSCOM 2009, ISBN 978-80-554-0031-0, section 6, EDIS - University of Zilina, Zilina 2009.
• [3] Kovalčík, A., Sojčák, D., Zvarková, D., Combined cycle plants for cogeneration in industrial power station, In proceedings of international conference TRANSCOM 2009, ISBN 978-80-554-0031-0, section 6, EDIS - University of Zilina, Zilina 2009.
• [4] Labuda, R., Isteník, R., Influence of combustion engine regime change dynamic on its operational quantities, In proceedings of international conference KOKA 2005, ISBN 80-01-03293-0, CTU Prague, p.173-178, Prague 2005.
• [5] Labuda, R., Isteník, R., Hlavňa, V., How to influence CO2 production by style of vehicle control, New trends in construction and exploitation automobiles, Vehicles 2007, ISBN 978-80-8069-942-0, SPU Nitra, Nitra 2007.
• [6] Sojčák, D., Hlavňa, V., Barta, D., A structure of the cooling system, In: Communications, ISSN 1335-4205, Vol. 7, No. 4, p.23-26, EDIS - University of Zilina, Zilina 2005.
• [7] KEGA 038ŽU-4/2011.
• [8] SK-PL-0035-09.
• [9] VEGA 1/0554/10.