Reproduction of chassis dynanometer driving cycles on the road as a means of a achieving repeatable on-road emissions tests

• Autorzy: Vojtisek-Lom M. , Fenkl M.
• Języki publikacji: EN

Słowa kluczowe

EN

Real-world emissions; portable on-board monitoring systems; emissions test repeatability

• Wydawca: Łukasiewicz Research Network - Institute of Aviation ; European Science Society of Powertrain and Transport KONES Poland ; Wydawnictwo Instytutu Technicznego Wojsk Lotniczych
• Czasopismo: Journal of KONES
• Rocznik: 2008
• Tom: Vol. 15, No. 4
• Strony: 577--582
• Opis fizyczny: Bibliogr. 4 poz., rys.

Twórcy

autor

Vojtisek-Lom M.

autor

Fenkl M.

• Technical University of Liberec Faculty of Mechanical Engineerin, Department of Vehicles and Engines Hdlkova 6, 461 17 Czech Republic tel.[phone], fax: [phone],

Bibliografia

• [1] Vojtišek-Lom, M., Cobb, J. T.: On-road light-duty vehicle emission measurements using a novel inexpensive on-board portable system, Presented at the 8th CRC On-road vehicle emissions workshop, San Diego, CA, April 20-22, 1998.
• [2] Recommended Standard SAE J2711: Recommended Practice for Measuring Fuel Economy and Emissions of Hybrid-Electric and Conventional Heavy-Duty Vehicles. Society of Automotive Engineers, Warrensdale, Pennsylvania, USA 2002.
• [3] Miller, W., Cocker, D., Johnson, K., Norbeck, J. M., Park, C. S., Welch, B.: Measuring Real-world, Heavy-duty Diesel Emissions with a Mobile Lab. Presented at the 12th CRC Onroad Vehicle Emissions workshop, San Diego, California, USA 2002.
• [4] Lenaers, G., Van Poppel, M.: PEMS Measured Emissions of two EURO 2 Buses Retrofitted with Different Combinations of PM Traps and SCR. Presented at Transport and Environment: A Global Challenge, Milano, Italy 2007.