Selected problems concerning the analysis of thin-walled structures with the use of finite element method

• Autorzy: Jachimowicz J. , Mańkowski J. , Osiński J.
• Języki publikacji: EN

Abstrakty

EN

The aim of the paper was presentation and comparison of numerical methods applied in thin-walled structures analysis, with special attention paid to possibility of usage the Finite Element Method (FEM), especially in nonlinear analysis. There were presented basic differences between classical approach to modelling and analyzing thin-walled structures, and these performed with FEM methods using. The biggest emphasis was placed on the analysis of semimonocoąues, in which the loss in the shell 's stability is possible in the range of operational load activity. According to this, many nonlinear terms like global and local buckling, contact problems, significant deformations and shifts, are present. Worth emphasizing is the fact, that tension field, is something that was described long time ago. First paper s about this phenomenon were published in the last century. Although it is a common effect that takes place in semimonocoques, there are not many publications that analyze and examine this phenomenon. In this paper, an analysis of two-sided, thin-walled spar, which has undergone the flexion by the shearing force in the plane of the panel, was presented. The spar was designed as a classic semimonocoque, in which load transmission function is separated. It was assumed that, for the sake of small thickness, shell elements transmit mainly tangential loads, normal loads, when normal loads are transmitted by framework elements. Riveted joints are used to join elements of framework and shell. There are presented and compared results of analysis for models with various complexities. Firstly, results of analysis of classical model of semimonocoques were presented. It means that framework elements were modelled as rod elements transmitted only normal loads, but shell elements were modelled as disc semimonocoque elements, in this case transmitted only tangential loads. Area of section of rod elements was adequately increased, in order to consideration mating width, coming from partial transmission of normal loads by the shell elements. Results obtained for intermediate models were also presented, as well as for complex shell model, which allows on advanced nonlinear analysis of tension field, which consider contact between framework and shell elements. Applications of formulated models to thin-walled structure, especially aircraft ones and further possibilities of presented method of analysis were discussed.

Słowa kluczowe

EN

diagonal tension; wing structures; thin-walled structures; aircraft; FEM; modelling

• Wydawca: Łukasiewicz Research Network - Institute of Aviation ; European Science Society of Powertrain and Transport KONES Poland ; Wydawnictwo Instytutu Technicznego Wojsk Lotniczych
• Czasopismo: Journal of KONES
• Rocznik: 2008
• Tom: Vol. 15, No. 1
• Strony: 109--118
• Opis fizyczny: Bibliogr. 23 poz., rys.

Twórcy

autor

Jachimowicz J.

autor

Mańkowski J.

autor

Osiński J.

• Military University of Technology, Department of Mechanics and Applied Computer Science Kaliskiego Street 2, 00-908 Warsaw, Poland tel: [phone],

Bibliografia

• [1] ABAQUS Analysis User’s Manual, ABAQUS, Inc., United States of America 2004.
• [2] Argyris, J. H., Kesley, S., Energy Theorems and Structural Analysis, Butterworts Co., London 1956.
• [3] Bathe, K. J., Finite Element Procedures, Prentice-Hall, Inc. A Simon & Schuster Company, Englewood Cliffs, New Jersey 07632 1966.
• [4] Brzoska, Z., Statyka i stateczność konstrukcji pretowych i cienkościennych, Państwowe Wydawnictwo Naukowe, Warsaw 1961.
• [5] Cicala, P., Effects Cotouts in Semimonocoque Structures, Journal of the Aeronautical Sciences, Vol. 16, No. 3, 1948.
• [6] Cicala, P., II Guscioa Directrice Circolare con Pannelli e Correnti UGRALI Soggetto a Carichi Transversali, Monografie Scietifiche di Areonutica Minister della Difesa -Areonutica, No. 7, Roma 1947.
• [7] Cicala, P., Sul Calcolo delle Strutture a Guscio, L’Areotechnika, Vol. 27, No. 1, No. 2, 1947.
• [8] Ebner, H., Köller, H.,: Uber die Einleitung von Langskraften in Versteifte Zylinderschalen, Jahrbuch 1937.
• [9] Ebner, H., Köller, H., Uber die Krafteinleitung in Dunnwandige Zylinderschalen, Luftfahrtforschung, Vol. 13, No. 12, 1937.
• [10] Hertel, H., Leichtbau Flugzeuge Und Andere Leichtbauwerke, Springer-Verlag, Berlin-Göttingen-Heidelberg 1960.
• [11] Jachimowicz, J., et al., Opracowanie metody obliczeniowej oraz przykłady obliczeń rzeczywistych konstrukcji lotniczych, Sprawozdanie Instytutu Lotnictwa, No. 21/RW/WO/80, Warsaw 1980.
• [12] Jachimowicz, J., Lamparski, J., Przegląd materiałów z zakresu obliczeń metoda elementów skończonych cienkościennych konstrukcji lotniczych, Sprawozdanie Instytutu Lotnictwa No. 6/BW/WS/76, Warsaw 1976.
• [13] Jachimowicz, J., Statyczna analiza sztywnościowo-wytrzymałosciowa korpusów maszynowych, Rozprawa doktorska, Warsaw University of technology, Warsaw 1995.
• [14] Jachimowicz, J., Zastosowanie macierzowej metody się w obliczaniu konstrukcji lotniczych, Prace Instytutu Lotnictwa, No. 89, Wydawnictwa Przemysłu Lotniczego, Warsaw 1982.
• [15] Kuhn, P., Peterson, J. P., Levin Ross L., A Summary of Diagonal Tension, Part I-Methods of Analysis, National Advisory Committee for Aeronautics TN 2661, 1952.
• [16] Kuhn, P., Stresses in Aircraft and Shell Structures, McGraw-Hill Book Company Inc., New York-Toronto-London 1956.
• [17] Payload Flight Equipment Requirements and Guidelines for Safety–Critical Structures, National Aeronautics and Space Administration, International Space Station Program, Johnson Space Center, Houston, Teras, Contract No. NAS9-02099 (PA16), 2002.
• [18] Romanów, F., Wytrzymałość ram i nadwozi pojazdów, Wydawnictwa Komunikacji i Łączności, Warsaw 1988.
• [19] Rusiński, E., Mikrokomputerowa analiza ram i nadwozi pojazdów i maszyn roboczych, Wydawnictwa Komunikacji i Łączności, Warsaw 1990.
• [20] Simon, H., Wagner, H., Uber die Krafteinleitung in Dunnwandige Zylinderschalen, Luftfahrtforschung, Vol. 13, No. 9, 1936.
• [21] Simon, H., Ein Iteration zur Analyse von Storbelastungen bei Zylinderschalen, Luftfahrtforschung, Vol. 16, No. 12, 1939.
• [22] Teisseyre, J., Budowa nadwozi. Obliczenia, Wydawnictwa Komunikacji i Łączności, Warsaw 1965.
• [23] Zienkiewicz, O. C., The Finite Element Method, Third Edition, McGraw-Hill, London 1977.