Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first previous next last
cannonical link button

http://yadda.icm.edu.pl:443/baztech/element/bwmeta1.element.baztech-article-BUJ5-0033-0103

Czasopismo

Journal of KONES

Tytuł artykułu

High-quality silumin on pistons of combustion engines

Autorzy Jankowski, A.  Pietrowski, S.  Sieminska, B.  Szymczak, T. 
Treść / Zawartość
Warianty tytułu
Języki publikacji EN
Abstrakty
EN In the paper the test results are presented for the AlSH2Cu5Ni5MgO.5CrO.05MoO.05WO.05VO.05 newly worked out silumin close to eutectic piston-silumin with the elevated content ofcopper and nickel to approx. 5% with relation to generally applied the AISH2 piston silumin. The novel silumin contains also Cr, Mo, In and V micro alloy additions in quantity approx. 0.05 percent for every element. Research of microstructure, HB hardness and coefficient of lineal thermal expansion a for the AlSil2Cu5Ni5MgO.5CrO.05MoO.05WO.05VO.05 silumin in the cast state, after the separation strengthening and additional short duration high-temperature heat-treatment were performed. Research of the microstructure of the AlSH2Cu5Ni5MgO.5CrO.05MoO.05WO.05VO.05 silumin showed the occurrence in it following constituent phases: alfa(Al), beta(Si), Al2Cu and AlMoCrWVMgNiSiCuFe. The separation strengthening brought about the coagulation of silicon emissions. The short duration high-temperature heat-treatment caused additional coagulation of silicon emissions and also its coalescence. Measurement of the HB hardness showed high hardness investigated alloy in the rough state, approx. 30% higher from the AlSi2 piston silumin. Measurement of the a coefficient of thermal expansion showed beneficial effects of novel alloy connected with the value decreasing of this coefficient as well so called hysteresis. Further studies on novel alloy will concentrate on alloy-additional and processes of the heat treatment.
Słowa kluczowe
EN combustion engines   piston   composite alloys   heat treatment   thermal expansion   hysteresis  
Wydawca Łukasiewicz Research Network - Institute of Aviation
European Science Society of Powertrain and Transport KONES Poland
Wydawnictwo Instytutu Technicznego Wojsk Lotniczych
Czasopismo Journal of KONES
Rocznik 2009
Tom Vol. 16, No. 4
Strony 563--573
Opis fizyczny Bibliogr. 7 poz., rys.
Twórcy
autor Jankowski, A.
autor Pietrowski, S.
autor Sieminska, B.
autor Szymczak, T.
  • Institute of Aviation Al. Krakowska 110/114 02-256 Warsaw, Poland tel +48 22 846 0011 fax: +48 22 846 4432, ajank@ilot.edu.pl
Bibliografia
[1] Pietrowski, S., Krystalizacja, struktura i właściwosci siluminów tłokowych. Wydawnictwo PŁ, Łódź, 1999.
[2] Pietrowski, S., Siluminy. Wydawnictwo PŁ, Łódź, 2001.
[3] Górny, Z., Sobczak, J., Nowoczesne tworzywa odlewnicze na bazie metali nieżelaznych. ZAPIS, Kraków 2005.
[4] Pietrowski, S., Sieminska-Jankowska, B., Type of alloy and the form of eutectical silicon effects on silumin coefficient of expansion, Institute of Aeronautics - Warsaw Faculty of Mechanical Engineering Technical University of Gdansk Polish Academy, Science Committee of Mechanical Engineering, 1993.
[5] Sieminska-Jankowska, B., Preliminary Research Novel Composite Materials with Small Hysteresis and High Functional Parameters for Combustion Engines Pistons, Journal of KONES Powertrain and Transport, pp. 447-45, Vol. 16, No. 1 2009.
[6] Sieminska, B. Jankowski, A., Pietrowski, S., The pistons from novel composite alloys for future combustion engines of low emission exhaust gases and low noise levels, Congress Proceedings, Vol. III, Future Powertrain Solutions, Springer Automotive Media, pp. 484-494, 2008.
[7] Pietrowski, S. Szymczak, T., Siluminutes alloy crystallization, Archives of Foundry Engineering, Vol. 9, Issue 3, pp.143-158, 2009.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-article-BUJ5-0033-0103
Identyfikatory