Narzędzia help

Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
first previous next last
cannonical link button

http://yadda.icm.edu.pl:443/baztech/element/bwmeta1.element.baztech-article-BUJ5-0033-0070

Czasopismo

Journal of KONES

Tytuł artykułu

Analysis of application of chosen methods for tdc determination in marine diesel engines

Autorzy Łutowicz, M. 
Treść / Zawartość
Warianty tytułu
Języki publikacji EN
Abstrakty
EN In the operating marine diesel engines the indication diagnostics tests are usually performed through a 0.5-1.0 me ter long indication channel which delays and disfigures the pressure signal being measured. the delay depends on the engine 's speed and load. the pressure sensor itself together with an amplifler is an additional source of delay and disfigurements, so the registered pressure curve is displaced even if theTDC piston's position hadbeen estimated with the highest accuracy. when the over exploited engine is being tested the angle of delay can achieve several degrees and differ for each cylinder. in that case cylinders' load is unequal and torsional vibrations occur in the engine operation. in case when some simplifying assumptions have been adopted the part of diagnostic information is lost what could lead to a false diagnosis. in the paper the attention is focused on the mistakes which could be made in the marine diesel engine diagnostics when different TDC assessment methods are used. TDC corrections with compression pressure analysis are possible only in case when crankshaft angle position is precise. in case of measurement with constant frequency such corrections are possible only when the engine is good balanced.
Słowa kluczowe
EN diesel engine   transport   marine diesel engine   indication   TDC  
Wydawca Łukasiewicz Research Network - Institute of Aviation
European Science Society of Powertrain and Transport KONES Poland
Wydawnictwo Instytutu Technicznego Wojsk Lotniczych
Czasopismo Journal of KONES
Rocznik 2009
Tom Vol. 16, No. 4
Strony 301--306
Opis fizyczny Bibliogr. 4 poz., rys.
Twórcy
autor Łutowicz, M.
  • Akademia Marynarki Wojennej Smidowicza Street 69, 81-103 Gdynia 3, mluto@wp.pl
Bibliografia
[1] Łutowicz, M., Evaluation of the Condition of Cylinder Systems of the Engine Based on an Compression Process Analisis, Polish Journal of Environmental Studies, Vol. 18, No. 2A, 2009.
[2] Polanowski, S., Błędy odniesienia GMP tłoków do punktów zerowych pochodnych ciśnień cylindrowych silników okrętowych, Jurnal of KONES, 2000.
[3] Staś, M. J., Thermodynamic Determination of T.D.C. in Piston Combustion Engines, SAE Technical Paper Series, Nr 960610.
[4] Wimmer, A., Glaser, J., Indykowanie silnika, AVL, Warszawa 2004.
Kolekcja BazTech
Identyfikator YADDA bwmeta1.element.baztech-article-BUJ5-0033-0070
Identyfikatory