Project of the evaluation and classification system of vehicles and automobile devices in aspect of elctromagnetic compatibility

• Autorzy: Łukjanow S. , Pijanowski B. , Kołodziejczak M.
• Języki publikacji: EN

Abstrakty

EN

In the paper have been discussed project of the system of evaluation and classification of vehicles and automobile devices in aspect of electromagnetic compatibility (EMC). There have been presented additional criteria concerning emission of electromagnetic disturbances and immunity to the disturbances as well as means to classify the quality of tested vehicles and automobile devices, inpurpose of improving road traffic sofety and protection of electromagnetic environment. It has been presented proposals of EMC integrated evaluation methods for vehicles and automobile devices. For the vehicles it comprises five categories where evaluation is carried out for three components: broadband and narrow band emission and immunity to electromagnetic radiation. For devices there are also proposed five categories where evaluation is carried out for four components: broadband and narrowband emission, immunity to electromagnetic radiation and to electrical transients. There are also presented the examples that illustrate proposed system of automobile and devices classification in aspect of EMC and algorithm of the verification and evaluation of vehicles according to project. Proposed criteria of integrated evaluation of vehicles and automobile devices enables evaluation of quality, what can contribute in engineering of high competitive products.

Słowa kluczowe

EN

vehicles; electromagnetic compatibility; testing

• Wydawca: Łukasiewicz Research Network - Institute of Aviation ; European Science Society of Powertrain and Transport KONES Poland ; Wydawnictwo Instytutu Technicznego Wojsk Lotniczych
• Czasopismo: Journal of KONES
• Rocznik: 2009
• Tom: Vol. 16, No. 1
• Strony: 325--333
• Opis fizyczny: Bibliogr. 13 poz., rys.

Twórcy

autor

Łukjanow S.

autor

Pijanowski B.

autor

Kołodziejczak M.

• Automotive Industry Institute Jagiellońska 55, 03-301 Warsaw, Poland tel.:/fax.[phone],

Bibliografia

• [1] ECE Regulation No 10, Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility.
• [2] Commission Directive 2004/104/EC of 14 October 2004, Adapting to technical progress Council Directive 70/156/EEC relating to the radio interference (electromagnetic compatibility) of vehicles and amending directive 70/156/EEC on the approximation of the laws of the Member States relating to type-approval of motor vehicles and their trailers.
• [3] CISPR 16-2. Specification for radio disturbance immunity measuring apparatus and methods. Part 2: Methods of disturbance and immunity measurements.
• [4] CISPR 12. Vehicles’, motorboats’ and spark-ignited engine-driven devices’ radio disturbance characteristics – Limits and methods of measurement.
• [5] ISO 7637-2. Road vehicles – Electrical disturbance from conduction and coupling – Part 2: Electrical transient conduction along supply lines only on vehicles with nominal 12 V or 24 V supply voltage.
• [6] ISO 11451. Road vehicles – Electrical disturbances by narrowband radiated electromagnetic energy – Vehicle test methods - Part 2: Off vehicle radiation sources.
• [7] ISO 11451. Road vehicles – Electrical disturbances by narrowband radiated electromagnetic energy – Vehicle test methods – Part 4: Bulk current injection (BCI).
• [8] ISO 11452. Road vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy – Part 2: Absorber-lined shielded enclosure.
• [9] ISO 11452. Road vehicles – Component test methods for electrical disturbances fromnarrowband radiated electromagnetic energy – Part 3: Transverse electromagnetic (TEM) cell.
• [10] ISO 11452. Road vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy – Part 4: Bulk current injection (BCI).
• [11] ISO 11452. Road vehicles – Component test methods for electrical disturbances from narrowband radiated electromagnetic energy – Part 5: Stripline.
• [12] Lukjanow, S., Pijanowski, B., Testing of electromagnetic compatibility In aspect of development the automobile engineering, KONMOT-AUTOPROGRESS, Szczawnica, 2008.
• [13] Pijanowski, B., Electromagnetic compatibility in vehicles, Serwis Motoryzacyjny, 9/2008