Capacity and friction force in slide journal bearing gap by laminar unsteady lubrication

• Autorzy: Krasowski P.
• Języki publikacji: EN

Abstrakty

EN

This paper shows results of numerical solutions modifled Reynolds equations for laminar unsteady oil flow in slide Journal bearing gap. Laminar unsteady oil flow is performed during periodic and unperiodic perturbations of bearing load or is caused by the changes of gap height in time. During modelling crossbar bearing operations in combustion engines, bearing movement perturbations from engine vertical vibrations causes velocity flow perturbations of lubricating oil on the bearing race and on the bearing slider in the circumferential direction. Above perturbations occur mostly during the starting and stopping of machine. This solution example applies to isothermal bearing model with infinity length. Lubricating oil used in this model has Newtonian properties and constant dynamic viscosity. Results are presented in the dimensionless hydrodynamic pressure and tangential tension distribution diagrams. Diagrams also presents capacity and friction force change during the time ofvelocity perturbations. Received solutions were compared with the solution received by the stationary lubrication flow in the slide Journal bearing, which were made with the same parameter assumption by constant dynamie oil viscosity. Isothermal bearing model is similar to friction node model by steady-state heat load conditions. Described effect can be used as on example of modelling the bearing friction node operations in reciprocating movement during exploitation of engines and machines.

Słowa kluczowe

EN

laminar unsteady lubrication; journal bearing; pressure; capacity and friction forces

• Wydawca: Łukasiewicz Research Network - Institute of Aviation ; European Science Society of Powertrain and Transport KONES Poland ; Wydawnictwo Instytutu Technicznego Wojsk Lotniczych
• Czasopismo: Journal of KONES
• Rocznik: 2010
• Tom: Vol. 17, No. 3
• Strony: 231--238
• Opis fizyczny: Bibliogr. 6 poz., rys.

Twórcy

autor

Krasowski P.

• Gdynia Maritime University Morska Street 81-87, 81-225 Gdynia, Poland teL:[phone], fax:[phone],

Bibliografia

• [1] Krasowski, P., Modelling of laminar unsteady and unsymetrical oil flow in slide journal bearing gap, Tribologia 5, s. 1425-1436, 2002.
• [2] Krasowski, P., Pressure and capacity forces in slide journal plane bearing by laminar unsteady lubrication, Journal of Polish CIMAC, Diagnosis, Reliability and Safety, Vol. 3, No. 2, pp. 91-98, Gdansk 2008.
• [3] Krasowski, P., Pressure and velocity distribution in slide journal bearing by laminar unsteady lubrication, Journal of KONES Powertrain and Transport, Vol. 16, No. 2, pp. 239-246, Warsaw 2009.
• [4] Teipel, I., Waterstraat, A., The Reynolds equation for lubrication under unsteady conditions, Proceedings the IX Canadian Congress of Applied Mechanics, pp. 497-502, University of Saskatchewan, 1983.
• [5] Wierzcholski, K., Mathematical methods in hydrodynamic theory of lubrication, Technical University Press, Szczecin 1995.
• [6] Wierzcholski, K., Teoria niekonwencjonalnego smarowania łożysk ślizgowych, Technical University Press, Szczecin 1995.