Geometry of the Wankel rotary engine

• Autorzy: Drogosz P.
• Języki publikacji: EN

Abstrakty

EN

This article describes the basic principles for determining the geometry of Wankel rotary engines. An attempt is made to clarify if the characteristics of the rotary engine are such that the engine may be brought into more general use as an internal combustion hydrogen engine. An analysis of the data indicates that reorganizing the basic mathematical issues would be useful. Also the clarification of the names used to describe the basic curve characterizing the Wankel engine may be useful too. Now in such names and basic mathematical issues there are many differences generating many difficulties in comparison information comingfrom different sources. In this article one most convenient name and form of mathematical equation were chosen and described. The chosen name is the best for communication in the English language, but the other described names can be useful when comparing information from other European languages. This is the first time that the chosen form of mathematical equation is proposed to be used in accordance to construction of Wankel engines. Many other applications of the chosen form of mathematical equation ascertain proper and convenient use. The main advantages of this form of mathematical equation are applications of two main parameters: curve size parameter and dimensionless curve parameter. These two parameters decided about convenience in changing volume of internal combustion engines and comparisons of performance characteristic of different Wankel engines.

Słowa kluczowe

EN

hydrogen engines; internal combustion engines; Wankel rotary engines; trochoids

• Wydawca: Łukasiewicz Research Network - Institute of Aviation ; European Science Society of Powertrain and Transport KONES Poland ; Wydawnictwo Instytutu Technicznego Wojsk Lotniczych
• Czasopismo: Journal of KONES
• Rocznik: 2010
• Tom: Vol. 17, No. 3
• Strony: 69--74
• Opis fizyczny: Bibliogr. 10 poz., rys.

Twórcy

autor

Drogosz P.

• University of Warmia and Mazury Technical Sciences Faculty, Department of Mechatronics Słoneczna Street 16A, 10-710 Olsztyn, Poland tel: [phone], fax: [phone],

Bibliografia

• [1] Autobusy Gazowe (2), Nowoczesny Warsztat, 11, 2009.
• [2] Bensinger, W. D., Rotationskolben-Verbrennungsmotoren, Springer-Verlag Berlin, Heidelberg, New York 1973.
• [3] Bernhardt, M., Silniki spalinowe o tłokach obrotowych, Wydawnictwa Komuniacji i Łączności, Warszawa 1964.
• [4] Bernhard, M., Wiśniewski, S., Samochodowe silniki spalinowe dziś i jutro, Wydawnictwo Ministerstwa Obrony Narodowej, Warszawa 1967.
• [5] Bronsztejn, I. N., Siemiendiajew, K. A., Matematyka, Poradnik Encyklopedyczny, Państowe Wydawnictwo Naukowe, Warszawa 1988.
• [6] Kostyra, K., Niektóre zagadnienia połączeń poligonalnych (praca doktorska), Wrocław 1964.
• [7] Kujawski, M., Kinematyczne możliwości obróbki wałków i otworów o przekroju poprzecznym opartym na bazie trochoid (praca doktorska), Politechnika Poznańska, Poznań 1965.
• [8] Kujawski, M., Mechanizmy obiegowe z nieokrągłymi kołami zębatymi, podstawy projektowania i wykonania, Wydawnictwo Politechniki Poznańskiej, Rozprawy, Nr 276, Poznań 1992.
• [9] Motor, Nr 32-33, 2009.
• [10] Motor, Nr 17-18, 2010.