Digital factory

• Autorzy: Gregor M. , Medvecky S. , Matuszek J. , Stefanik A.
• Języki publikacji: EN

Abstrakty

EN

The paper presents the results of research and development of the Digital Factory solutions in industry. The implementation of this technology in industry is described and discussed. The results of research and development cover design of assembly system, its processes, simulations model, ergonomic analysis etc. In the paper are presented the solutions developed in the framework of co-operation with industrial partners like Volkswagen Slovakia, Thyssen Krupp - PSL, Whirlpool. The paper contains results of research realized in 3D laser scanning and digitization of large size objects of the current production systems. The developed and validated methodology shows the procedure of 3D laser scanning application by the digitization of production halls, machine tools, equipment, etc. This procedure was tested and validated in chosen industrial companies. The paper presents achieved benefits and future research goals as well.

Słowa kluczowe

EN

digital factory; reverse engineering; simulation; 3D laser scanning

• Wydawca: Łukasiewicz Industrial Research Institute for Automation and Measurements PIAP
• Czasopismo: Journal of Automation Mobile Robotics and Intelligent Systems
• Rocznik: 2009
• Tom: Vol. 3, No. 3
• Strony: 123--132
• Opis fizyczny: Bibliogr. 15 poz.,rys.

Twórcy

autor

Gregor M.

autor

Medvecky S.

autor

Matuszek J.

autor

Stefanik A.

• Professor at the Central European Institute of Technology (CEIT), University of Žilina, Slovakia

Bibliografia

• [1] Durajova M., Macus P., Gregor M., Medvecky S., Objects Digitalization Using 3D Laser Scanning, Study No. 008 UKaI-06. University of Žilina, August 2006, (in Slovak).
• [2] DELMIA - DPE. DELMIA, Paris, 2008.
• [3] DELMIA - Human. DELMIA, Paris, 2008.
• [4] Gregor M., Medvecky Š., Matuszek J., "Digital Factory", Productivity and Innovation, vol.2, no. l, 2006, ISSN 1734-9834, pp.38-42.
• [5] Gregor M., Medvecky Š., Mičieta B., Matuszek J., Hrčeková A., Digital Factory, SLCP Žilina, KRUPA print 2007, ISBN 80-969391-5-7.148, pp. (In Slovak).
• [6] Gregor M., et al., Factory Mock Up, VWAssembly System, Research Study. CEIT- S002-12-2007, 2007, pp. 27.
• [7] Gregor M., et al., 3D Laser Scanning. The methodology of targe production halls scanning, Research project CEIT-V001-ll-2007, CEIT, Žilina, 2007,82, pp. (In Slovak).
• [8] Gregor M., Budzel F., Štefanik A., Plinta D., "3D Laser scanning in Digitization of current production sys-tems". In: 9th IFAC Workshop on Intelligent Manufac-turing Systems, Szczecin, 2008, p. 137 -144.
• [9] Gregor M., Śtefánik A., Furmann R., Škorik P., "Virtual manufacturing in research and industry". In: 9th IFAC Workshop on Intelligent Manufacturing Systems, Szcze­cin, 2008, p. 131-135.
• [10] Haas W., AK-Digitale Fabrik, Bericht Roadmap, June 2004, Audi Ingolstadt.
• [11] Jovane F., Westkamper E., Williams D., The ManuFuture Roadf Towards Competitive and Sustainable High-Adding-Value Manufacturing, Springer Verlag: Berlin, ISBN: 978-3-540-77011-4, 2009, p. 262.
• [12] MANUFUTURE - a vision for 2020, Assuring the Future of Manufacturing in Europe, Report of the High Level Group, DG Research, European Commission, Brussels, November2004.
• [13] Taisch M., Thoben K.D., Montorio M.E., Advanced Manufacturing, An ICT and Systems Perspective, Taylor & Francis: London, 2007, pp. 319.
• [14] Westkaemper E., Bischoff J., von Briel R., Duerr M., "Factory Digitalizing - An adapted approach to a digital factory planning in existing factories and buildings", Werkstattstechnik, no. 91,2001.
• [15] Zimmermann P., Virtual reality - Forschung und Anwen-dung Bei Volkswagen, VR-Labor der Konzern-Forschung, Wolfsburg, 2005, (in German).