Review, classification and comparative analysis of maintenance management models

• Autorzy: Lopez Campos, M. , Crespo Marquez A.
• Języki publikacji: EN

Abstrakty

EN

The present article does a chronological tour through some representative maintenance management models, describes them in a general way and classifies them according to their functioning under declarative models and under process oriented models. It distinguishes in addition the innovations proposed by each author and compares the elements appearing on each model with some of the points mentioned by the ISO 9001:2008 standard, as well as other criteria considered suitable to the case. From this analysis are derived the results between which are distinguished some desirable characteristics for a modern and efficient maintenance management model. In addition the application of these models for supporting industrial needs, as well as its future challenges are discussed too.

Słowa kluczowe

EN

maintenance; management; maintenance process; maintenance model; maintenance tools

• Wydawca: Łukasiewicz Industrial Research Institute for Automation and Measurements PIAP
• Czasopismo: Journal of Automation Mobile Robotics and Intelligent Systems
• Rocznik: 2009
• Tom: Vol. 3, No. 3
• Strony: 110--115
• Opis fizyczny: Bibliogr. 26 poz.,rys.

Twórcy

autor

Lopez Campos, M.

autor

Crespo Marquez A.

• Department of Industrial Management, School of Engineering, University of Seville, Camino de los Descubrimientos s/n. 41092 Seville, Spain,

Bibliografia

• [1] Abudayyeh O., Khan T., Yehia S., Randolph D., “The design and implementation of a maintenance information model for rural municipalities”,Advances in Engineering Software, vol. 36, no. 8, 2005, pp. 540-548.
• [2] AENOR Norma UNE-EN 13306:Terminología de mantenimiento, 2002.
• [3] AENOR Norma ISO 9001:2008 Sistemas de gestión de la calidad, 2008.
• [4] Campbell J.D.,Organización y liderazgo del mantenimiento, Madrid: TGP Hoshin, 2001, (in Spanish).
• [5] Crespo Márquez A., Iung B., “Special issue on e-maintenance”,Computers in Industry, vol. 57, no. 1, 2006, pp. 473-475.
• [6] Crespo Márquez A.,The Maintenance Management Framework. Models and Methods for Complex Systems Maintenance, United Kingdom: Springer, 2007.
• [7] Cholasuke C., Bhardwa R., Antony J., “The status of maintenance management in UK manufacturing organisations: results from a pilot survey”,Journal of Quality in Maintenance Engineering, vol. 10, no. 1, 2004, p. 5.
• [8] Duffuaa S., Raouf A. & Dixon Campbell, J.,Sistemas de mantenimiento. Planeación y control, México: Limusa,2000.
• [9] Encyclopedia Britannica Online. Consulted: May 11 2008,http://0search.eb.com.fama.es.es:80/eb/article-248126.
• [10] Hassanain M.A., Froese T.M., Vanier D.J., “Development of a maintenance management model based on IAI standards”, Artificial Intelligence in Engineering, vol. 15, no. 1, 2001, pp. 177-193.
• [11] Intelligent Maintenance Centre (IMC) -http://www.imscenter.net/. Consulted: September 2005.
• [12] Kelly A.,Maintenance and the industrial organization in Strategic Maintenance Planning, United Kingdom: Butterworth-Heinemann, 2006.
• [13] Kelly A., Harris M.J.,Gestión del mantenimiento industrial, Madrid: Publicaciones Fundación Repsol, 1997, (in Spanish).
• [14] Murthy D.N.P., Atrens A., Eccleston J.A., “Strategic maintenance management”,Journal of Quality in Maintenance Engineering, vol. 8, no. 4, 2002, pp. 287-305.
• -[15] Pintelon L.M., Gelders L.F., “Maintenance management decision making”,European Journal of Operational Research, vol. 58, no. 3, 1992, pp. 301-317.
• [16] Pintelon L., Van Wassenhove L., “A maintenance management tool”, Omega, vol. 18, no. 1, 1990, pp. 59-70.
• [17] Porter M.E.,Competitive Advantage: Creating and Sustaining Superior Performance. New York: The Free Press, 1985.
• [18] Pramod V.R., Devadasan S.R., Muthu S., Jagathyraj V.P., Dhakshina Moorthy G., “Integrating TPM and QFD for improving quality in maintenance engineering”,Journal of Quality in Maintenance Engineering, vol. 12, no. 2, 2006, pp. 1355-2511.
• [19] Prasad Mishra R., Anand D., Kodali R., “Development of a framework for world-class maintenance systems”,Journal of Advanced Manufacturing Systems, vol. 5, no. 2, 2006, pp. 141-165.
• [20] Riis J., Luxhoj, J. & Thorsteinsson, U., “A situational maintenance model”, International Journal of Quality and Reliability Management, vol. 14, no. 4, 1997, pp. 349-366.
• [21] Söderholm P., Holmgren, M. & Klefsjö, B., “A process view of maintenance and its stakeholders”,Journal of Quality in Maintenance Engineering, vol. 13, no. 1, 2007, pp. 19-32.
• [22] Tam A., Price J., Beveridge A., “A maintenance optimisation framework in application to optimise power station boiler pressure parts maintenance”,Journal of Quality in Maintenance Engineering, vol. 13, no. 4, 2007, pp. 364-384.
• [23] Tsang A., “Strategic dimensions of maintenance management”, Journal of Quality in Maintenance Engineering ,vol. 8, no. 1, 2002, pp. 7-39.
• [24] Vanneste S.G., Van Wassenhove L.N., “An integrated and structured approach to improve maintenance”,European Journal of Operational Research, vol. 82, no. 2, 1995, pp. 241-257.
• [25] Waeyenbergh G., Pintelon L., “A framework for maintenance concept development”,International Journal of Production Economics, vol. 77, no. 1, 2002, pp. 299-313.
• [26] Wireman T.,Development performance indicators for managing maintenance, New York: Industrial Press, 1998.