Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
This paper focuses on viable position estimation schemes for timing belt drives where the position of the carriage (load) is to be calculated via reference models accepting input from a position sensor on the actuator of the timing belt. A detailied analysis on the source of transmission errors is presented a number of relevant mathematical modeis are developed utilizing a priori knowledge on the process. The paper illustrates that such schemes are very effective when the drive system is not subjected to external loads es well as widely changing operating conditions such as ambient temperature, belt tension.
Rocznik
Tom
Strony
55--61
Opis fizyczny
Bibliogr. 7 poz., rys.
Twórcy
autor
autor
autor
autor
- Middle East Technical University, Department of Mechanical Engineering, Ankara, 06531, Turkey
Bibliografia
- [1] A. S. Kulkarni, and M. A. El-Sharkawi "Intelligent Precision Position Control of Elastic Drive Systems “, IEEE Trans. On. Energy. Conv. , vol. 16:1, 2001, pp 26-31.
- [2] W. Li and M. Rehani, "Modeling and control of a belt-drive positioning table," in: Proceedings of the 22nd IEEE International Conference of Industrial Electronics (IECON), vol. 3, Taipei, Taiwan, Aug. 1996, pp. 1984-1989.
- [3] Z. Zhao and L. Cai, "On the improvement of tracking performance of positioning tables," in: Proc. of the 22nd IEEE International Conference of Industrial Electronics (IECON), vol. 3, Taipei, Taiwan, 1996. pp. 1990-1995.
- [4] S. Abrate, "Vibrations of belts and belt drives," Mechanism and Machine Theory, vol. 27, no. 6, pp. 645- 659, 1992.
- [5] D. W. South and J. R. Mancuso, Eds., Mechanical Power Transmission Components, New York: Marcel Dekker Inc., 1994.
- [6] F. Ostertag and M. J. Carvalho-Ostertag, „Fuzzy control of an inverted pendulum with fuzzy compensation of friction forces," International Journal of Systems Science, vol. 24, no. 10, 1993, pp. 1915-1921.
- [7] B. Amstrong-Helouvry, P. Dupont, and C. Canudas De Wit, "A survey of models, analysis tools and compensation methods for the control of machines with friction", Automatica, vol. 30. no. 7, 1994, pp. 1083-1138.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BUJ5-0012-0015