Present status and prospects of research in SINS on the modification of surface properties by pulsed plasma streams

• Autorzy: Langner J. , Piekoszewski J. , Stanisławski J. , Werner Z.
• Konferencja: Special Issue International Workshop "INCO-COPERNICUS" November 22-26, 1999, Kudowa Zdrój, Poland
• Języki publikacji: EN

Abstrakty

EN

The paper presents examples of the most important results obtained in SINS during the last decade, interesting from the point of view of industrial applications. It also indicates some of the most prospective directions in research on modification of the surface properties of materials by means of pulsed plasma streams.

Słowa kluczowe

EN

IONOTRON plasma injector; pulsed plasma processing; surface modification

• Wydawca: Institute of Nuclear Chemistry and Technology
• Czasopismo: Nukleonika
• Rocznik: 2000
• Tom: Vol. 45, nr 3
• Strony: 193--197
• Opis fizyczny: Bibliogr. 17 poz., rys.

Twórcy

autor

Langner J.

• The Andrzej Soltan Institute for Nuclear Studies (IPJ), 05-400 Otwock-Swierk by Warsaw, Poland, Tel.: [phone]

autor

Piekoszewski J.

• The Andrzej Soltan Institute for Nuclear Studies (IPJ), 05-400 Otwock-Swierk by Warsaw, Poland, Tel.: [phone]

autor

Stanisławski J.

• The Andrzej Soltan Institute for Nuclear Studies (IPJ), 05-400 Otwock-Swierk by Warsaw, Poland, Tel.: [phone]

autor

Werner Z.

• The Andrzej Soltan Institute for Nuclear Studies (IPJ), 05-400 Otwock-Swierk by Warsaw, Poland, Tel.: [phone]

Bibliografia

• 1. Hodgson RT, Baglin J. E., Pal R, Neri J. M., Hammer D (1980) Ion beam annealing of semiconductors. Appl Phys Lett 37:187–189
• 2. Kuciński J, Czaus K, Langner J, Piekoszewski J (1997) Investigation of the coating of the type: metallic layer-interlayer (Ti) ceramic layer (TiN), produced with use of modified plasma gun. In: Proc Int Symp PLASMA'97, Warsaw, Poland. 1:221–224
• 3. Langner J, Gryziński M, Gębalski S et al. (1985) Ion beam source for pulse implantation doping. In: Henning K (ed) Int Conf Energy Pulse Modif Rel Mat EPM'84, Rossendorf. 1:213–219
• 4. Langner J, Piekoszewski J, Pochrybniak C et al. (1994) Deposition by pulsed erosion of nickel and aluminium on copper. Surf Coat Tech 66:300–305
• 5. Langner J, Piekoszewski, Stanisławski J, Werner Z (1997) Deposition and mixing of cobalt, titanium and tungsten on the pulse melted surfaces of substrates. Surf Coat Tech 96:129–133
• 6. Langner J, Piekoszewski J, Werner Z et al. (2000) Surface modification of constructional steels by irradiation with high intensity pulsed nitrogen plasma beams. Surf Coat Tech (in press)
• 7. Piekoszewski J, Gryziński M, Langner J, Werner Z (1981) Pulse ion implantation – new single doping technique. Phys Status Solidi A 67:163–167
• 8. Piekoszewski J, Langner J, Białoskórski J et al. (1993) Introduction of nitrogen into metals by high intensity pulsed ion beams. Nucl Instrum Meth B 80–81:344–349
• 9. Piekoszewski J, Langner J, Nowicki L, Turos A, Waliś L, Ciurapiński A (1992) High-dose doping of steels with nitrogen using intense pulsed ion beams. Mater Lett 14:131–134
• 10. Piekoszewski J, Langner J, Waliœ L, Werner Z (1997) Intense plasma pulses: two modes of the use for surface processing purposes. Surf Coat Tech 93:209–212
• 11. Piekoszewski J, Langner J, Werner Z, Waliś L (1998) Modification of surface properties of materials by pulsed plasma beams. Surf Coat Tech 106:228–233
• 12. Piekoszewski J, Waliœ L, Langner J (1997) Surface morfology of nitrogen-alloyed steels using high intensity pulsed plasma beams. Mater Lett 32:49–53
• 13. Piekoszewski J, Waliś L, Langner J et al. (1996) Alloying of austenic stainless steel with nitrogen using high-intensity pulsed beams of nitrogen plasma. Nucl Instrum Meth B 114:263–268
• 14. Piekoszewski J, Werner Z, Pochrybniak C, Langner J, Białoskórski J (1995) Pulse implantation doping: the single step method of forming the photovoltaic junctions. Electron Technology 28;3:153–170
• 15. Piekoszewski J, Werner Z, Wieser E et al. (1999) Formation of surface Pd-Ti alloys using the pulsed plasma beams. Nukleonika 44:239–244
• 16. Shulov V. A., Nochovnaya N. A., Remnev G. E., Raybchikov A. I. (1997) Modification of the properties of aircraft engine compressor blades by uninterrupted and pulsed-ion beams. Surf Coat Tech 96:39–44
• 17. Sokołowska A, Romanowski Z, Zdunek K, Michalski A, Wronikowski M (1989) Stalowa Huta steel plant's implementation of the technology of tin coating generated on cutting tools through the impulse-plasma method. IIM 501/162/22817 (in Polish)