Influence of temperature on breakdown voltage of 10 MeV electron beam irradiated LDPE and HDPE

• Autorzy: Borhani M. , Ziaie F. , Bolorizadeh M. , Mirjalili G.
• Języki publikacji: EN

Abstrakty

EN

The paper presents measurements of the breakdown (dielectric strength) and dielectric constant of the low density polyethylene (LDPE) and high density polyethylene (HDPE) thin sheets, which were irradiated with a 10 MeV electron beam in the range of 0-470 kGy using a Rhodotron accelerator system. The tests were performed at temperatures ranging from 20°C to 110°C. Variation of the measured parameters vs. radiation absorbed dose and temperature were discussed.

Słowa kluczowe

EN

breakdown voltage; dielectric constant; temperature effect; electron beam; low-density polyethylene

• Wydawca: Institute of Nuclear Chemistry and Technology
• Czasopismo: Nukleonika
• Rocznik: 2006
• Tom: Vol. 51, nr 3
• Strony: 179--182
• Opis fizyczny: Bibliogr. 10 poz., rys.

Twórcy

autor

Borhani M.

autor

Ziaie F.

autor

Bolorizadeh M.

autor

Mirjalili G.

• Physics Department, Shahid Bahonar University, P. O. Box 76169-133, Kerman, Iran,

Bibliografia

• 1. ASTM (1995) Standard test method for dielectric breakdown voltage and dielectric strength of solid electrical insulating materials at commercial power frequencies. ASTM D 149
• 2. ASTM (1995) Standard test method for AC loss characteristics and permittivity (dielectric constant) of solid electrical insulation. ASTM D 150
• 3. Bradwell A, Cooper R, Varlow B (1971) Conduction in polyethylene with strong electric fields and the effect of prestressing on the electric strength. Proc IEEE 118:247−254
• 4. Chen G, Banford HM, Davies AE (1995) Effect of gamma-irradiation on electrical breakdown stress of LDPE. In: IEEE 5th Int Conf on Conduction and Breakdown in Solid Dielectrics, Leicester, UK,pp 556−560
• 5. Ieda M (1986) Pursuit of better electrical insulating solid polymers: present status and future trends. IEEE Trans Electr Insul 21:793−802
• 6. Kolesov SN (1980) The influence of morphology on the electric strength of polymer insulation. IEEE Trans Electr Insul 15:382−388
• 7. Nagao M, Kosaki M, Tohyama K, Tokoro T (1996) Highfield dissipation current waveform in e-beam irradiated XLPE film at high temperature. IEEE Trans Dielec Electr Insul 3;3:375−379
• 8. Riechert U, Vogelsang R, Kindersberger J (2001)Temperature effect on DC breakdown of polyethylene cable. In: 12th Int Symp on High Voltage Eng, Bangalore,India, pp 537−540
• 9. Storti GM (1968) Experimental investigation and analysis of dielectric breakdowns induced by electron irradiation in polymer films. NASA technical note, D-4810
• 10.Wintlee HJ (1990) Basic physics of insulators. IEEE Trans Electr Insul 25:27−44