Input Shaping and Feedback Control of a Single-Link Flexible Manipulator

• Autorzy: Tokhi O. M. , Mohamed Z.
• Języki publikacji: EN

Abstrakty

EN

This paper presents investigations into the development of hybrid control schemes for input tracking and end-point vibration suppression of a single-link flexible manipulator system. A collocated proportional--derivative (PD) control scheme using hub angle and hub velocity feedback is initially developed for control of rigid body motion of the system. This is then extended to incorporate a noncollocated proportional-integral-derivative (PID) controller and input shaping techniques for control of vibration of the system. Simulation results of the response of the manipulator with the controllers are presented in time and frequency domains. The performances of the control schemes are assessed in terms of input tracking and level of vibration reduction in comparison to the PD control scheme.

Słowa kluczowe

EN

feedback control; input shaping; PD control; PID control; vibration control

• Wydawca: Wydawnictwa AGH
• Czasopismo: Mechanika / Akademia Górniczo-Hutnicza im. St. Staszica
• Rocznik: 2003
• Tom: T. 22, z. 3
• Strony: 447--454
• Opis fizyczny: Bibliogr. 11 poz., rys.

Twórcy

autor

Tokhi O. M.

• Department of Automatic Control and System Engineering, The University of Sheffield, UK

autor

Mohamed Z.

• Department of Automatic Control and System Engineering, The University of Sheffield, UK

Bibliografia

• [1] Mohamed Z., Tokhi M.O.: Vibration control of a single-link flexible manipulator using command shaping techniques. Proceedings IMechE-I: Journal of Systems and Control Engineering, 216, 2002, 191-210
• [2] Aspinwall D.M.: Acceleration profiles for minimising residual response. Transactions of ASME: Journal of Dynamic Systems, Measurement and Control, 102(1), 1980, 3-6
• [3] Bayo E.: Computed torque for the position control of open-loop flexible robots. Proceedings of IEEE International Conference on Robotics and Automation, Philadelphia 1988, 316-321
• [4] Onsay T., Akay A.: Vibration reduction of a flexible arm by time optimal open- loop control. Journal of Sound and Vibration, 147 (2), 1991, 283-300
• [5] Singhose W.E., Singer N.C., Seering W.P.: Comparison of command shaping methods for reducing residual vibration. Proceedings of European Control Conference, Rome 1995,1126-1131
• [6] Singer N.C., Seering W.P.: Preshaping command inputs to reduce system vibration. Transactions of ASME: Journal of Dynamic Systems, Measurement and Control, 112(1), 1990,76-82
• [7] Khorrami F., Jain S., Tzes A.: Experiments on rigid body-based controllers with input preshaping for a two-link flexible manipulator. IEEE Transactions on Robotics and Automation, 10(1), 1994,55-65
• [8] Tokhi M.O., Azad A.K.M.: Control of flexible manipulator systems. Proceedings IMechE-I: Journal of Systems and Control Engineering, 210,1996,113-130
• [9] Shchuka A., Goldenberg A.A.: Tip control of a single-link flexible arm using feedforward technique. Mechanical Machine Theory, 24,1989,439-455
• [10] Tokhi M.O., Mohamed Z., Shaheed M. H.: Dynamic characterisation of a flexible manipulator system. Robotica, 19(5), 2001,571-580
• [11] Warwick K.: Control systems: an introduction. London, Prentice Hall 1989