PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Modification of Catalytic Activity of Cu-Ti Amorphous Alloy Ribbons by Cathodic Hydrogen Charging

Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Since hydrogen is known to be one of the most efficient embrittling atomic species, cathodic hydrogen charging was used in an attempt to modify the structure, composition and morphology of Cu-Ti amorphous alloy ribbons. Various methods of analysis such as X-ray electron microanalysis, SEM, XRD and electrochemistry, with varying lateral resolution and different information depths, as well as catalytic tests, were used to follow the changes within the ribbons and at the surface, and their interrelations with catalytic activity. The activity in a test reaction (dehydrogenation of 2-propanol) was enhanced up to a conversion level of 66%, which is much higher than that obtained with all other pre-treatments previously applied.
Rocznik
Strony
1379--1389
Opis fizyczny
Bibliogr. 34 poz., rys.
Twórcy
autor
  • Institute of Physical Chemistry, Polish Academy of Sciences, 01-224 Warsaw, Kasprzaka 44/52, Poland
  • Faculty of Materials Science and Engineering, Technical University of Warsaw, Warsaw, Poland
  • Institute of Physical Chemistry, Polish Academy of Sciences, 01-224 Warsaw, Kasprzaka 44/52, Poland
  • Institute of Physical Chemistry, Polish Academy of Sciences, 01-224 Warsaw, Kasprzaka 44/52, Poland
autor
  • Department of Organic Chemistry, University of Szeged, Szeged, Hungary
autor
  • Department of Organic Chemistry, University of Szeged, Szeged, Hungary
autor
  • Faculty of Materials Science and Engineering, Technical University of Warsaw, Warsaw, Poland
  • Institute of Physical Chemistry, Polish Academy of Sciences, 01-224 Warsaw, Kasprzaka 44/52, Poland
Bibliografia
  • 1. Molnar Ä., Smith G.V. and Bartök M., Adv. Catal., 36, 329 (1989).
  • 2. Baiker A., Glassy metals in catalysis, in: Glassy Metals III, H. Beck, H.-J. Guntherodt, eds., Springer, Berlin, 1994, pp. 121-162.
  • 3. Szummer A., Pisarek M., Dolata M., Molnar A., Janik-CzachorM., Varga M. and Sikorski K., Mater. Sci. Forum, 2001, 377: pp. 15-28.
  • 4. Molnär Ä., KatonaT., Bartök M. and Varga K., J. Mol Catal., 64,41(1991).
  • 5. Baiker A., Schlögl R., Armbruster E. and Guntherodt H.-J., J. Catal., 107,221 (1987).
  • 6. Schild Ch., Woakun A. and Baiker A., Surf. Sci., 269/270, 520 (1992).
  • 7. Baiker A., Maciejewski M., Tagliaferri S. and Hug P., J. Catal., 151, 407 (1995).
  • 8. Hydrogen Degradation of Ferrous Alloys, R.A. Oriani, J.P. Hirth and M. Smialowski: (Eds.), Noyes Publication, Park Ridge NJ 1984.
  • 9. Oriani R.A., Corrosion, 43, 390 (1987).
  • 10. Such D., Asoka-Kumar P. and Daukskardt R.H., Acta Mater., 50, 537 (2002).
  • 11. Szummer A., Janik-Czachor M., Molnar A., Marchuk I., Varga M. and Filipek S.M., J. Mol. Catal. A Chem., 176, 205(2001).
  • 12. Baranowski B. and Filipek S.M., Synthesis of metal hydrides, in: High-Pressure Chemical Synthesis, J. Jurczak, B. Baranowski (Eds.), Elsevier, Amsterdam, 1989, pp. 55-100.
  • 13. Suzuki K., J. Less Common Met., 89, 183 (1983).
  • 14. Filipek S.M., Szummer A. and Marchuk I., J. Alloy Compd., 293-295, 7 (1999).
  • 15. Szummer A., Janik-Czachor M., Molnar A., Marchuk I., Varga M. and Filipek S.M., J. Phys. Condens. Matter., 14, 11405 (2002).
  • 16. Wiswall R., Hydrogen Storage in Metals, in: Hydrogen in Metals II, Application Oriented Properties, G. Alefeld and J. Volkl (Eds.), Springer-Verlag, Berlin Heidelberg, NJ 1978.
  • 17. Katona T., Molnar A., Perczel V.I., Kopasz Cs. and Hegedus Z., Surf. Interface Anal., 19, 519 (1992).
  • 18. Vanini F., Buechler St., Yu X.N., Erbudak M., Schlappbach L. and Baiker A., Surf. Sci., 189-190, 1117 (1987).
  • 19. Gasser D. and Baiker A., Appl. Catal., 48, 279 (1989).
  • 20. Baiker A., Baris H. and Guntherodt H.J., Chem. Commun., 930 (1986).
  • 21. Kudelski A., Janik-Czachor M., Bukowska J., Pisarek M. and Szummer A., Mater. Sci. Eng., A326,364 (2002).
  • 22. Janik-Czachor M., Szummer A., Bukowska J., Molnar A., Mack P., Filipek S.M., Kedzierzawski P., Kudelski A., Pisarek M., Dolata M. and Varga M., Appl. Catal. A Gen., 235, 157 (2002).
  • 23. Bartók M., et al., Sterochemistry of Heterogeneous Metal Catalysis, Wiley, Chichester, 1985, p. 297.
  • 24. Kudelski A., Janik-Czachor M., Pisarek M., Bukowska J., Mack P., Dolata M. and Szummer A., Surf. Sci., 507-510, 441 (2002).
  • 25. Pisarek M., Janik-Czachor M., Gebert A., Molnar A., Kędzierzawski P. and Rac B., Appl. Catal. A: Gen., 267, 1 (2004).
  • 26. Ismail N., Uhlemann M., Gebert A. and Eckert J., J. Alloy Compd., 298, 146 (2000).
  • 27. Ismail N., Gebert A., Uhlemann M., Eckert J. and Schultz L., J. Alloy Compd., 314, 170 (2001).
  • 28. Galus Z., Fundamentals of Electrochemical Analysis 2-nd edn, Ellis Horwood New York London Toronto Sydney Tokyo Singapore, PWN Warsaw, 1994, p. 518, F. Vydra, K. Štulik and E. Julakova, Electrochemical Stripping Analysis, Horwood, Chichester, 1976.
  • 29. Evans J.W., Wainwright M.S., Bridgewater A.J. and Young D.J., Appl. Catal., 7, 75 (1983).
  • 30. Denise B., Sneeden R.P.A., Beguin B. and Cherifi O., Appl. Catal., 30, 353 (1987).
  • 31. Majorowski S. and Baranowski B., J. Phys. Chem. Solids, 43 1119(1982).
  • 32. Madix R.J., Adv. Catal., 29,1 (1980).
  • 33. Cunningham J., Sayyed G.H., Cronin J.A., Fierro J.L.G., Healy., Hirschwald W., Ilyas M. and Tobin J.P., J. Catal., 102, 160 (1986).
  • 34. Han Y., Shen J. and Chen Y., Appl. Catal. A Gen., 205, 79 (2001).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BUJ1-0024-0081
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.