PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Modification of epoxy mortars by a pet hydrolysate

Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
This paper describes a method of obtaining as well as selected properties of epoxy mortars. The addition of poly(ethylene terephtalate) hydrolysate (PET) as a modifier of epoxy resins (EP) resulted in an improvement in selected properties of the mortars in comparison with the properties of mortars based on unmodified resins. The application of PET waste materials in the modification of polymeric binders in mortars is also advantageous for economical and ecological reasons.
Twórcy
autor
  • Rzeszow University of Technology, Rzeszów, Poland
Bibliografia
  • [1] Ru Wang, Pei-Ming Wang, Xin-Gui Li Physical and mechanical properties of styrene butadiene rubber emulsion modified cement mortars, Cem Concr Res 2005, 35, 900-906
  • [2] Chong Y. Rha et al. Preparation and characterization of absorbent polymer cement composites, Cem Concr Res 1999, 29, 231-236
  • [3] Rai US., Snigh RK. Effect of polyacrylamide on the different properties of cement and mortars, Mater Sci Eng A, 2005, 392, 42-50
  • [4] Ohama Y. Recent progress in concrete polymer composites, Adv Cem Bas Mat, 1997, 5, 31-40
  • [5] Ribeiro MCS. et al. Thermal expansion of epoxy and polyester polymer mortars – plain mortars and fiber reinforced mortars, Polym Test 2003, 22, 849-857
  • [6] Czarnecki L. „Betony żywiczne”, Wydawnictwo ,,Arkady”, Warszawa 1982 (in Polish)
  • [7] Silva DA. et al. Degradation of recycled of PET fibers in Portland cement-based materials, CemConcrRes 2005, 35, 1741-1746
  • [8] Choi NW., Ohama Y. Development and testing of polystyrene mortars using waste EPS solution-based binders, Constr Build Mater 2004, 18, 235-241
  • [9] Palos A., D'Souza NA. Modification of cement mortar with recycled ABS, Cem Concr Res 2001, 31, 1003-1007
  • [10] Bignozzi MC. et al. New polymer mortars containing polymeric wastes. Part 1. Microstructure and mechanical properties, Composites, Part A, 2000, 31, 97-106
  • [11] Bignozzi MC. et al. New polymer mortars containing polymeric wastes. Part 2. Dynamic mechanical and electric behavior, Composites, Part A, 2002, 33, 205-211
  • [12] Verdolotti L. et al. Polyurethane-cement-base foam: Characterization and potential uses, J Appl Polym Sci 2008, 97, 1-8
  • [13] Rebeiz KS. Time-temperature properties of polymer concrete using recycled PET, Cem Concr Compos 1995, 17, 119-124
  • [14] Abdel-Azim AA., Atta AM. Recycled flexible resins in concrete, Polym J 1997, 29, 21
  • [15] Mahdi F. et al. Physicochemical properties of polymer mortar composites using resins derived from post-consumer PET bottles, Cem Concr Compos 2007, 29, 241-248
  • [16] Abdel-Azim AA. Unsaturated polyester resins from poly(ethylene terephtalate) waste for polymer concrete, Polymer Engineering and Science 1996, 36, 2973-2977
  • [17] Szlezyngier W.: ,,Tworzywa sztuczne”, Wydawnictwo Oświatowe FOSZE, Rzeszów 1998 (in Polish)
  • [18] Atta AM. et al. New epoxy resins based on recycled poly(ethylene terephtalate) as organic coatings, Prog Org Coat 2007, 58, 13-22
  • [19] Tawfik ME., Eskander SB. Polymer concrete from marble waste and recycled poly(ethylene terephtalate), J Elast Plast 2006, 38, 65-78
  • [20] Matynia T. et al. Zastosowanie nienasyconej żywicy poliestrowej z odpadowego PET do produkcji żywicznych ładunków górniczych, Przemysł Chemiczny 1999, 78(8), 303-307
  • [21] Fabrycy E. et al. Waste PET - derived substances as crosslinking agents for epoxy resins, Polym Recycl 2001 6(1), 49-56
  • [22] Fabrycy E. et al. Neue Epoxid-harter aus PET-abfallen, Adhesion, 2000, 44 (4), 35-39
  • [23] Benosman AS. et al. Diffusion of chloride ions in polymer- mortar composites, J Appl Polym Sci 2008, 110, 1600-1605
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BTB2-0058-0012
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.