Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Effect of polypropylene fibers on mechanical properties of HPC at high temperature
Języki publikacji
Abstrakty
Stosowanie włókien polipropylenowych zalecane jest przez normę EUROCODE 2 jako rozwiązanie technologiczne, ograniczające ryzyko eksplozyjnego niszczenia betonów wysokowartościowych (BWW) w wyniku działania wysokiej temperatury. Przedstawiono wyniki badań wpływu dodatku włókien polipropylenowych w ilości 0,1 i 0,2% objętości betonu (0,9 i 1,75 kg/m3) na zmiany wytrzymałości na ściskanie i modułu sprężystości w funkcji temperatury w zakresie od 20° do 600°C.
Utilization of polypropylene fibers is highly recommended by EUROCODE 2 as a technological solution to prevent the risk of explosive spalling in HPC. The paper presents an investigation on the influence of the polypropylene fibers dosed in the amount of 0.1 and 0.2% of concrete volume (0,9 and 1,75 kg/m3) on hot compressive strength and modulus of elasticity at 120°C, 250°C, 400°C and 600°C.
Wydawca
Czasopismo
Rocznik
Tom
Strony
263--266
Opis fizyczny
Bibliogr. 9 poz., il.
Twórcy
autor
- Politechnika Krakowska
autor
- Centre Scientifique et Technique du Bâtiment Marne-la-Vallée, Francja
Bibliografia
- 1. T.Z. Harmathy, Moisture in materials in relation to fire test. ASTM, Special Technical Publication No 385, 1964, pp. 74-95.
- 2. K. Hertz, Heat-induced explosion of dense concretes. Technical University of Denmark, Institute of Building Design, Report No 166, 1998.
- 3. V.V. Zhukov, Reasons of explosive spalling of concrete by fire. Scientific Research Institut for Concrete and Reinforced Concrete, Moscow.
- 4. K. Hertz, Limits of Spalling of Fire Exposed Concrete. Fire Safety Journal 38, 103 (2003).
- 5. EUROCODE 2 - Design of concrete structures. Part 1.2: General rules - Structural fire design.
- 6. P. Kalifa, G. Chéné and C. Gallé, High-temperature behaviour of HPC with polypropylene fibers: From spalling to microstructure. Cem.Concr.Res. Vol. 31, Issue 10, 1487 (2001).
- 7. A. Nomowé et al., Porosité supplémentaire consécutive à la fusion de fibres de polypropylene dans un béton à hautes performances. Revue Française de génie civil. Vol. 6, n° 2, 301 (2002).
- 8. A. Hoft, A. Bilodeau, and V.M. Malhotra, Elevated Temperature, Effects on HSC, Residual Strength. Concrete International pp. 41 (2000).
- 9. P. Pimienta, I. Hager, Mechanical behaviour of HPC at high temperature. Proc. 6th Int. Symp. on Utilization of High Strength/High Performance Concrete, Leipzig, June 2002, pp. 1291-1298.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BTB2-0019-0034