PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Światłowodowy czujnik polarymetryczny do pomiaru prądu

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
EN
A polarimetric fiber-optic current sensor
Języki publikacji
PL
Abstrakty
PL
W pracy przedstawiono światłowodowy czujnik polarymetryczny wykorzystujący efekt Faradaya zmieniający płaszczyznę polaryzacji światła liniowo spolaryzowanego pod wpływem oddziaływania płynacego prądu w przewodniku. Zaprezentowano wyniki analizy wpływu indukowanej dwójłomności w światłowodzie jednomodowym na podstawowe parametry opisujące polaryzacje na wyjściu czujnika prądu. Przedstawiono wyniki badań eksperymentalnych proponowanego rozwiązania. Podano charakterystykę przetwarzania i czułość czujnika dla prądu elektrycznego o częstotliwości sieciowej, określono niepewność czujnika w zakresie wartości skutecznych prądu, która jest nie większa niż 2%. Czujnik ten zastosowano do pomiaru prądu sinusoidalnie zmiennego o amplitudach od 0 do 700 A i o częstotliwości 50 Hz.
EN
In this paper a fiber-optic polarimetric current sensor using the Faraday effect changing the polarization plane of linear polarized light is presented. The analysis results of the impact of linear birefringence induced in a singlemode fiber on the basic parameters describing polarization at the current sensor output are described. For the analysis of the polarization state at the sensor output, the Jones matrices describing all the elements of the optical circuit were used. The sensor consists of an FSM633 He-Ne laser (of 633 nm wavelength) made by NewPort. The coil has 25 convolutions and diameter of 5 cm. The fiber optic was spun 15 times per meter (15 turns/m) to reject the linear birefringence which is induced as the result of flexing the fiber. The experimental investigations of the proposed solution were carried out on a measuring position specially constructed for this type of measurements in which alternating currents were generated by a short circuit transformer. The investigation results are given in the paper. The current was measured within the range from 0 to 700A. The characteristics of processing, the sensor sensitivity for the power frequency current and the sensor uncertainty within the range of efficient current values which is not higher than 2% are also presented in the paper.
Wydawca
Rocznik
Strony
274--276
Opis fizyczny
Bibliogr. 12 poz., rys., schem., wzor
Twórcy
autor
Bibliografia
  • [1] Wodziński J.: Wysokonapięciowa technika prób i pomiarów, PWN, Warszawa, 1999.
  • [2] Opilski A., Błahut M., Gut K., Karasiński P., Pustelny T., Opilski Z., Rogoziński R.: Wybrane zjawiska fizyczne wykorzystywane w czujnikach światłowodowych, COE 2000, Szkoła, Gliwice 2000.
  • [3] Barczak K., Pustelny T., Zycki Z., Blazejczyk T.: Otical Fibre Magnetic Field Sensor for Monitoring of the State of Work of Electric Motors, Acta Physica Polonica A, Vol. 116, 2009, pp. 250-252.
  • [4] Ferrari J. A., Perciante C. D., Lagos A., Frins E.M.: Improved method for Faraday current sensor data processing, Optics Communications 199, 2001, pp. 77-81.
  • [5] Villaverde A. B., Munin E., Pedroso C. B.: Linear displacement sensor based on the magneto-optical Faraday effect., Sensors and Actuators A Physical 70, 1998, pp. 211-218.
  • [6] Tan C. Z., Arndt J.: Faraday effect in silica glasses, Physica B 233, 1997, pp. 1-7.
  • [7] Bohnert K., Gabus P., Nehring J., Brändle H.: Temperature and vibration insensitive fiber-optic current sensor, Journal Of Lightwave Technology 20 (2), 2002, pp. 267–276.
  • [8] Barczak K., Pustelny T., Dorosz D., Dorosz J.: Optical Fibre Current Sensor for Electric Power Industry, Acta Physica Polonica A, Vol. 118, 2010, pp. 1087-1089.
  • [9] Jaroszewicz L. R.: Rola polaryzacji i spójności w interferometrii światłowodowej, WAT, Warszawa, 1995.
  • [10] Ginter M.: Pomiar prądu wyładowania iskrowego, Aktualne problemy w elektrotechnice i informatyce, Kielce,2005, str. 45-50.
  • [11] Ginter M.: Pomiar prądów udarowych z wykorzystaniem polarymetrycznego czujnika światłowodowego, XXXVII Międzyuczelniana konferencja metrologów i konferencja grantowa, Zielona Góra, 2005, str. 139-144.
  • [12] Ginter M.: The measurement of the current during electric discharge, Engineering for the Future, Kielce, 2005, pp. 43-49.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BSW4-0099-0011
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.