PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!
  • Sesja wygasła!
  • Sesja wygasła!
Tytuł artykułu

Stanowisko do pomiaru napięć dynamicznych powstających w nici szwalnej w procesie szycia maszynowego

Treść / Zawartość
Identyfikatory
Warianty tytułu
EN
A stand for measurements of dynamic tensions arising in a sewing thread in the process of machine sewing
Języki publikacji
PL
Abstrakty
PL
Opracowano wirtualny przyrząd "Napięcia dynamiczne", oparty na modułach programu LabView 8.2 i zastosowano do rejestracji przebiegu napięć dynamicznych nici szwalnej. Stwierdzono zróżnicowany charakter przebiegu napięć dynamicznych testowanych podciągaczy. Przeprowadzone badania eksperymentalne wykazały przydatność zbudowanego stanowiska pomiarowego do oceny przebiegu napięć dynamicznych powstających w nici oraz oceny procesu formowania ściegu. Pozwoliły również zaobserwować znaczny spadek szczytowej wartości siły zaciągania ściegu dla podciągacza tarczowego w porównaniu do podciągacza profilowanego (oryginalny w maszynie stanowiącej obiekt badań), co wpłynęło na poprawę warunków tworzenia ściegu czółenkowego.
EN
The worked out virtual instrument "Dynamic tensions" is based on modules of the program LabView 8.2 for recording the waveforms of needle thread dynamic tensions. Estimation of dynamic tensions within the thread was preceded by construction of a take-up disc and choice of a sewing machine containing the discussed mechanism. It was found that the dynamic tensions for the constructed take-up disc have diversified character in relation to the profiled take-up mechanism (original in the machine). The tests of dynamic tensions were conducted for the needle thread during sewing on a modern test-bench enabling reading, recording and analysis. The measuring system allows identification of the thread dynamic tensions generated by the take-up disc mechanism. The experimental investigations carried out showed considerable decrease in the highest strength value of stitch tightening for the take-up disc mechanism, which influenced the improvement of conditions of the lockstitch creation in a sewing machine.
Wydawca
Rocznik
Strony
1575--1577
Opis fizyczny
Bibliogr. 5 poz., rys.,
Twórcy
autor
autor
autor
Bibliografia
  • [1] Więźlak W., Elmrych-Bocheńska J.: Process of the lockstitch tightening and optimization of the thread working conditions. Part I. Dynamic model of the phenomenon, Fibres and Textiles in Eastern Europe, vol. 14 (2006), No 4, 64-67.
  • [2] Więźlak W., Elmrych-Bocheńska J.: Process of the lockstitch tightening and optimization of the thread working conditions. Part II. The trial of optimizing the interlacement location in the stitch link, Fibres and Textiles in Eastern Europe, vol. 15 (2006), No 1, 62-65.
  • [3] Krasowska R., Korycki R.: Change of needle thread length in take-up disc zone of sewing machine, XI Conference of Faculty of Material Technologies and Textile Design 2008.
  • [4] Korycki R., Krasowska R.: Modeling of dynamics of lockstitch tightening process, 16th International Conference Strutex, Structure and Structural Mechanics of Textiles, Liberec (2009), 20-21.
  • [5] Krasowska R., Frydrych I.: Influence of the structure of the thread take-up disc on character of dynamic tensions in the lockstitch machine, 15th International Conference Strutex, Structure and Structural Mechanics of Textiles, Liberec (2008), 403-410.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BSW4-0088-0051
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.