PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Szacowanie emisji tlenków azotu (NOx) na podstawie danych eksploatacyjnych rzeczywistego obiektu przemysłowego

Treść / Zawartość
Identyfikatory
Warianty tytułu
EN
Estimation of nitrogen oxides NOx emission based on data from real industry plant
Języki publikacji
PL
Abstrakty
PL
W pracy podjęto próbę szacowania emisji tlenków azotu (NOx,) na podstawie danych eksploatacyjnych zbieranych podczas normalnej pracy Elektrociepłowni w Zielonej Górze. Pomimo że zanieczyszczenia te monitorowane są z użyciem specjalistycznych czujników, to wydaje się, że dodatkowa ich kontrola może być bardzo pożądana. Zwłaszcza, że ilość emitowanych zanieczyszczeń (w tym NOx) jest ściśle limitowana i kontrolowana. Wspomniane szacowanie wykonano wykorzystując technikę statystyczną zwaną regresją liniową.
EN
In the paper there is analysed the possibility of estimating nitrogen oxides NOx emissions based on the data taken from an industry plant (gas-based combined heat and power (CHP) plant in Zielona Góra, Poland). Even though the emission of NOx is monitored on-line by dedicated sensors installed on the plant, we believe that some additional monitoring would be desirable. This is especially important because emission of different kind of air-pollutants (including NOx) is strictly limited and monitored. The above mentioned estimation is performed by the statistical technique known as linear regression. In Section 2 the gas-based combined heat and power plant in Zielona Góra is briefly described. A simplified chart of the plant is shown in Fig. 1. The list of measurement points taken from the DCS system (distributed control system) of the greatest influence on the NOx emission is also given. In Section 3 there is shown the way how the raw data should be prepared, especially in the context of removing unwanted disturbances as well as the points which were selected for the final regression analysis. The results obtained are presented in Section 4. The best regression solution (row 3 in Table 3) is shown in Fig. 4. The accuracy is quite satisfactory and we believe that it is sufficient for the purpose of additional monitoring the main NOx sensors installed on the plant.
Wydawca
Rocznik
Strony
461--463
Opis fizyczny
Bibliogr. 7 poz., rys., tab., wykr.
Twórcy
autor
autor
Bibliografia
  • [1] Koronacki J., Mielniczuk J.: Statystyka dla studentów kierunków technicznych i przyrodniczych, WNT, Warszawa, 2006.
  • [2] Larose D. T.: Metody i modele eksploracji danych, PWN, Warszawa, 2008.
  • [3] Laudyn D., Pawlik M., Strzelczyń F.: Elektrownie, WNT Warszawa, 2006.
  • [4] Szargut J.: Termodynamika Techniczna, Wydawnictwo Politechniki Śląskiej, wydanie 4, 2005.
  • [5] Velleman P. F.: Definition and comparison of robust nonlinear data smoothing algorithms. Journal of the American Statistical Association, 75, 609-615, 1980.
  • [6] http://www.ec.zgora.pl.
  • [7] http://pl.wikipedia.org/wiki/DCS.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BSW4-0068-0018
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.