Identyfikatory
Warianty tytułu
Signals applied to the calibration and estimation of the A/D converters
Języki publikacji
Abstrakty
Operacje poprawiające dokładność przetwarzania rzeczywistego przetwornika A/C to kalibracja i korekcja. Ponadto, mające związek z dokładnością, właściwości rzeczywistego przetwornika A/C są charakteryzowane przez szereg parametrów estymowanych w wyniku testowania. Wspólne dla wszystkich takich działań (kalibracji, korekcji, testowania) jest to, iż rezultaty są silnie "sygnałowo zależne". Opisano zasady korekcji, kalibracji i testowania przetworników A/C. Objaśniono, na czym polega zależność rezultatów od rodzaju sygnału podlegającego przetworzeniu. Podano cechy sygnału teoretycznie najodpowiedniejszego do badania przetworników A/C. Określono, w jakim stopniu sygnały praktycznie stosowane posiadają takie cechy.
There are the following operations improving the accuracy of converting the real A/D converter: calibration and correction. Moreover, the properties of the real A/D converter, related to accuracy, are characterised by a number of parameters estimated through the process of testing. A feature common to all such operations (calibration, correction, testing) is the strongly "signal-dependent" character of results. The paper describes the rules of correction, calibration and testing of the A/D converters, and explains how the results are dependent on the type of signal being converted. The features of the signal, which is theoretically most suitable to test the A/D converters, are given. It has been also determined to what extent practically applied signals retain such features.
Wydawca
Czasopismo
Rocznik
Tom
Strony
16--19
Opis fizyczny
Bibliogr. 3 poz., rys., wzory
Twórcy
autor
- Wydział Elektroniki i Telekomunikacji, Politechnika Poznańska, domanska@et.put.poznan.pl
Bibliografia
- [1] Dallet D., Berthoumieu Y., A survey on dynamic characterization of A/D convertyers, Measurement, Vol. 24, 1998.
- [2] Domańska A., Optymalizacja parametrów konwersji a-c z sygnałem ditherowym i uśrednianiem według kryterium wariancji błędu kwantowania. Pomiary Automatyka Kontrola, Nr 7/8, 2006.
- [3] IEEE Std. 1241, 2000.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BSW4-0034-0014