Energy saving using heat exchangers covered with porous coatings

• Autorzy: Wójcik T. M.

Warianty tytułu

PL

Oszczędność energii przez zastosowanie wymienników ciepła z pokryciem porowatym

• Języki publikacji: EN

Abstrakty

EN

Exploitation of technical devices is always related to the energy consumption. Thus, if more efficient heat exchangers are used as part of mechanical systems, it is possible to save energy. The paper presents possible ways of producing more efficient heat transfer surfaces working under the nucleate boiling mode. When porous coverings are used, significant reduction of temperature differences is noticed at the same heat flux. It leads to higher energy efficiency.

Słowa kluczowe

EN

boiling; porous coatings

PL

wrzenie; powłoki porowate

• Wydawca: Wydawnictwo Politechniki Świętokrzyskiej
• Czasopismo: Structure and Environment
• Rocznik: 2010
• Tom: Vol. 2. no. 3
• Strony: 35--39
• Opis fizyczny: Bibliogr. 23 poz., rys., wzory

Twórcy

autor

Wójcik T. M.

• AGH University of Science and Technology, Cracow, Poland,

Bibliografia

• [1] Bergles A. E., (1997): Enhancement of pool boiling, Int. J. Refrigeration, Vol. 20, 8, pp. 545-551.
• [2] Bergles A. E., (1998): Techniques to Enhance Heat Transfer, in Handbook of Heat Transfer, ed. Rohsenow W.M., Hartnett, J.P., and Cho, Y.I., McGraw-Hill, New York.
• [3] Cieśliński J. T., (1991): An experimental study of nucleate pool boiling heat transfer from a flat horizontal plate covered with porous coatings, Archive of Thermodynamics, Vol. 12, No 1-4, pp. 69-76.
• [4] Nishikawa K., Ito T., Tanaka K., (1979): Augmented heat transfer by nucleate boiling on a sintered metal layer. Heat Transfer - Japanese Reseach, Vol. 8, pp. 65-81.
• [5] Orman Ł. J., (2008): Analiza efektywnej przewodności cieplnej mikropokryć porowatych (Analysis of effective thermal conductivity of porous microcoatings), Proc. of Conf. “Terotechnologia 2008”, Zeszyty Naukowe nr 11, Nauki Techniczne: Budowa i Eksploatacja Maszyn, pp. 215-220.
• [6] Orman Ł. J., (2008): Nucleate boiling heat transfer on a smooth surface of a fin, Proc. of XII Int. Symposium on „Heat Transfer and Renewable Sources of Energy” HTRSE - 2008, pp. 363-369.
• [7] Orman Ł. J., (2009): Possibilities of heat transfer enhancement in automotive heat exchangers, Proc. of 13th Int. Conf. „Transport Means 2009”, Kaunas University of Technology, Lithuania, pp. 116-119.
• [8] Orman Ł. J., (2010): Possibility of the application of microstructures in heating and ventilation systems, Structure and Environment, Kielce University of Technology, 1, Vol. 2, pp. 41-45.
• [9] Orman Ł. J., Orzechowski T., (2004): Analysis of the influence of the surface roughness on the heat transfer from extended surfaces, Science Report, CEEPUS Project PL-127: Measurement Technology in Advanced Machine Manufacturing Systems. General Editors: S. Adamczak, P.H. Osanna, Kielce University of Technology, pp. 115-123.
• [10] Orzechowski T., Orman Ł. J., (2006): Boiling heat transfer on surfaces covered with copper fibrous microstructures, Proc. of XI Int. Symposium on „Heat Transfer and Renewable Sources of Energy” HTRSE - 2006, Szczecin, pp. 613-619.
• [11] Orzechowski T., Orman Ł. J., (2006): Mikropowierzchnie strukturalne w wymianie ciepła (Microstructures in heat transfer engineering), Proc of Conf. „Terotechnologia 2006”, Zeszyty Naukowe nr 1, Nauki Techniczne: Budowa i Eksploatacja Maszyn, Kielce, s. 171-177.
• [12] Orzechowski T., Orman Ł. J., (2007): Wymiana ciepła przy wrzeniu pęcherzykowym na żebrze z dwuwarstwową strukturą siatkową (Nucleate boiling heat transfer on the fin with a two - layer wire mesh structure), Proc of „XIII Sympozjum Wymiany Ciepła i Masy”, Koszalin - Darłówek, s. 763-768.
• [13] Palm B., (1991): Enhancement of boiling heat transfer by aid of perforated metal foils, Ph.D. Thesis, The Royal Institute of Technology, Stockholm.
• [14] Poniewski M. E., (2001): Wrzenie pęcherzykowe na rozwiniętych mikropowierzchniach, Wydawnictwo PŚk, Kielce.
• [15] Radek N., Orman Ł. J. (2008): Water boiling on electro-spark deposited copper coating, ВІСНИК, 6, pp. 233-236.
• [16] Rainey K. N., You S. M. (2000): Pool boiling heat transfer from plain and microporous, square pinfinned surfaces in saturated FC-72, Journal of Heat Transfer, Vol. 122, pp. 509-516.
• [17] Ramvir S., Kasana H. S. (2004): Computational aspects of effective thermal conductivity of highly porous metal foams, Applied Thermal Engineering, 24, pp. 1841-1849.
• [18] Wójcik T. M. (2004): Boiling on cylindrical surfaces with thick - layered porous covering, Proc. of X Int. Symposium on „Heat Transfer and Renewable Sources of Energy”, HTRSE - 2004, pp. 653-660.
• [19] Wójcik T. M. (2006): Intensyfikacja wymiany ciepła dla wrzenia (Boiling heat transfer enhancement), Inżynieria i Aparatura Chemiczna, No 3, 45 (37), (in Polish), pp. 3-9.
• [20] Wójcik T. M., Poniewski M., Dziadoń A., Depczyński W. (2008): Experimental investigation of boiling heat transfer on new porous coverings, Proc. of XII Int. Symposium on „Heat Transfer and Renewable Sources of Energy” HTRSE - 2008, pp. 403-411.
• [21] Xiuling Y., Hongji X., Yaozhen S., Dongji C., Yuweng Z., Hongzhang Q. (1990): Experimental research of nucleate pool boiling heat transfer from compound enhanced porous surface in liquid nitrogen, Cryogenics, vol. 30, Supplement, pp. 297-302.
• [22] Zhang H. J., Chen L. (1988): Pool boiling heat transfer on the sintered porous surfaces, T. Nejat Verizoglu (ed), Particulate Phenomena and Multiphase Transport, Hemisphere, Vol. 1, pp. 529-538.
• [23] Zhang H. J., Zhao X. B. (1990): Experimental research on pool boiling heat transfer from a spraying porous surface, Preprints of 7th Int. Heat Pipe Conf., Minsk, pp. 187-194.