Powiadomienia systemowe
- Sesja wygasła!
- Sesja wygasła!
Tytuł artykułu
Autorzy
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Zastosowanie testu skręcania w obliczeniach siły wyciskania
Języki publikacji
Abstrakty
The paper deals with the calculation of the extrusion force using the results of the torsion test of aluminium alloy EN AW-2014. The mathematical model for the calculation of the extrusion force requires the knowledge of the functional relationship between the yield stress and the temperature, the deformation and the deformation rate. Based on the proposed mathematical model for the calculation of the yield stress, the functional relationship was derived to determine the extrusion force in the hot extrusion of semi-products of aluminium alloy EN AW-2014.
Wydawca
Czasopismo
Rocznik
Tom
Strony
81--85
Opis fizyczny
Bibliogr. 15 poz., rys., tab.
Twórcy
autor
autor
autor
autor
- Faculty of Special Technology, Alexander Dubcek University of Trenčin, Študentská 1, 911 50 Trenčín, Slovakia
Bibliografia
- [1] K. Laue, H. Stenger, Strangpressen, Verfaren-Maschinen-Werkzeuge, Dusseldorf: Aluminium-Verlag GmbH, 396 p., ISBN 3-87017-103-0, (1976).
- [2] R. Bidulsky, M. Actis Grande, M. Kabatova, M. Selecka, Acta Metallurgica Slovaca, 14, 349-355 (2008).
- [3] N. A. Fleck, Journal of the Mechanics and Physics of Solids, 43, 1409-1431, (1995).
- [4] T. Kvackaj, M. Zemko, T. Kuskulic, R. Kocisko, M. Besterci, S. V. Dobatkin, M. Molnarova, High Temperature Materials and Processes, 26, 147-150 (2007).
- [5] R. Kocisko, T. Kvackaj, J. Bidulska, M. Molnarova, Acta Metallurgica Slovaca, 15, 228-233 (2009).
- [6] S. Spigarelli, M. Cabibbo, E. Evangelista, J. Bidulska, Journal of Materials Science, 38, 81-88, (2003).
- [7] J. Bidulska, R. Bidulsky, L. Ceniga, T. Kvackaj, M. Cabibbo, E. Evangelista, Kovove Materialy, 46, 151-155, (2008).
- [8] K. Maar, T. Kvackaj, J. Bogna r, Extrusion and drawing, Kosice: ES VˇST, 224, (1985).
- [9] R. Pernis, Theory of metal forming, Trencın: FST TnUAD v Trencine, 168 p., ISBN 978-80-8075-244-6, (2007).
- [10] R. Kopp, H. Wiegels, Metall, 31, 268-275, (1977).
- [11] A. Geleji, Bildsame formung der metalle in rechnung und versuch. Berlin: Akademie-Verlag, 754 p., (1961).
- [12] P. Beiss, J. Broichhausen, Metall, 31, 132-138, (1977).
- [13] R. Pernis, P. Hroch, Technical report, ZVL, Povazska Bystrica, 3-4, 20-24, (1981).
- [14] R. Pernis, O. Hires, J. Jurenova, In Metal 2007: 16th International conference, 22.-24.5.2007. Hradec nad Moravici, Czech Republic, Ostrava, Tanger: May, 9 p., ISBN 978-80-86840-33-8, (2007).
- [15] J. Bidulska, PhD thesis. Koˇsice: Technical University in Kosice, Faculty of Metallurgy, 120 p., (2008).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BSW3-0082-0009