PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

An Invesigation Into the Influence of Blankholder Force on Springback in U-Bending

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
PL
Badanie wpływu siły dociskacza na sprężynowanie przy zagięciach typu "U"
Języki publikacji
EN
Abstrakty
EN
Springback is the main defect in U-channel forming process. Applying the blankholder force is one of the ways of solving the problem. On the other hand the value of the blankholder force should be chosen carefully. In this paper the relation of the blank-holder force and final springback, taking a benchmark of NUMISHEET'93 2-D draw bending and using a commercial FEM code has been studied. The simulations are pre-formed for AA5754-O and DP-Steel. In order to probe the relation, five different values are utilized in simulations. It is found that springback increases for the middle values of the blankholder force where the stretching and bending have equal effects on the blank. The maximum required punch loads are compared for the different values of blankholder force.
PL
Sprężynowanie jest głównym mankamentem w procesie formowania zagięć typu „U”. Zastosowaie siły dociskacza jest jednym ze sposobów rozwiązania tego problemu. Z drugiej strony, wartość siły dociskacza powinna być precyzyjnie wyznaczana. W niniejszej pracy omawiany jest związek siły dociskacza i końcowego sprężynowania, przy zastosowaniu wzorca NUMISHEET' 93 2-D oraz wykorzystaniu dostępnego na rynku kodu FEM. Symulacje zostały wykonane dla stali DP i AA5754-O. W celu przetestowania wspomnianego związku, w symulacjach wyznaczono pięć różnych wartości. Zaobserwowano, iż zginacze mają taki sam wpływ na materiał. Porównywane są maksymalne wymagane obciążenia tłocznika dla różnych wartości siły dociskacza.
Twórcy
  • Department of Mechanical Engineering, Ferdowsi University of Mashhad, 91775-1111, Mashhad, Iran
Bibliografia
  • [1] M. Firat, U-channel forming analysis with an emphasis on springback deformation, Journal of Materials and Design 28, 147-154 (2007).
  • [2] M. Samuel, Experimental and numerical prediction of springback and side wall curl in U-bending of anisotropic sheet metals, Journal of Materials Processing Technology 105, 382-393 (2000).
  • [3] S.-W. Lee, Y.-T. Kim, A study on the springback in the sheet metal flange drawing, Journal of Materiale Processing Technology 187, 89-93 (2007).
  • [4] V. Esat, H. Darendeliler, M. I. Gokler, Finite element analysis of springback in bending of aluminium sheets, Journal of Materials and Design 23, 223-229 (2002).
  • [5] J. R. Cho, S. J. Moon, Y. H. Moon, S. S. Kang, Finite element investigation on springback characteristics in sheet metal U-bending process, Journal of Materiale Processing Technology, 141, 109-116 (2003).
  • [6] X. Li, Y. Yang, Y. Wang, J. soBao, S. L i, Effect of material-hardening mode on the springback simulation accuracy of V-free bending, Journal of Materials Processing Technology, 123, 209-211 (2002).
  • [7] S. Choudhry, J. K. Lee, Dynamic plainstrain Finie element simulation of industrial sheetmetal forming processes, International Journal of Mechanical Sciences 36, 189-207 (1994).
  • [8] L. Papeleux, J. P. Panthot, Finite element simulation of springback in sheet metal forming, Journal of Materials Processing Technology 125-126, 785-791 (2002).
  • [9] I. N. Chou, C. Hung, Finite element analysis and optimization on springback reduction, International Journal of Machine Tools and Manufacturing 39, 517-536 (1999).
  • [10] M. Math, B. Grizel j, Finite element approach in the plate bending process, Journal of Materials Processing Technology 125-126, 778-784 (2002).
  • [11] L. P. Lei, S. M. Hwang, B. S. Kang, Finite element analysis and design in stainless steel sheet forming and its experimental comparison, Journal of Materiale Processing Technology 110, 70-77 (2001).
  • [12] I. Ragai, D. Lazim, J. A. Nemes, Anisotropy and springback in draw-bending of stainless 410: experimental and numerical study, Journal of Materiale Processing Technology 166, 116-127 (2005).
  • [13] G. Liu, Z. Lin, W. Xu, Y. Bao, Variable blankholder force in U-shaped part forming for eliminating springback error, Journal of Materials Processing Technology 120, 259-264 (2002).
  • [14] T. Hama, T. Nagata, C. Teodosiu, A. Makinouchi, H. Takuda, Finiteelement simulation of springback in sheet metal forming using local interpolation for tool surfaces, International Journal of Mechanical Sciences 50, 175-192 (2008).
  • [15] T. Yoshida, T. Katayama, K. Hashimoto, Y. Kuriyama, Shape control techniques for high strength steel in sheet metal forming, Nippon Steel Technical Report, No. 88, 2003.
  • [16] Hibbit, Karlsson & Sorensen, Inc. (2003) ABAKUS Standard User’s Manual Version6.5.
  • [17] W. Jiang, Study of two-surface plasticity theory, Journal of Engineering Mechanic 120, 2179-2200 (1994).
  • [18] C. Lee, J. Cao, Shell element formulation of multistep inverse analysis for axisymmetric deep drawing process, International Journal of Numerical Methods In Engineering 50, 681-706 (2001).
  • [19] M. G. Lee, D. Kim, c. Kim, M. L. Wenner, K. Chung, Springback evaluation of automotive sheets based on isotropic-kinematic hardening laws and non-quadratic anisotropic yield functions, part III: applications, International Journal of Plasticity 21, 915-953 (2005).
  • [20] M. Kadkhodayan, I. Zafarparandeh, On the relation of equivalent plastic strain and springback in sheet draw bending, International Journal of Material Forming 1, 141-144 (2008).
  • [21] M. C. Oliveira, J. L. Alves, B. M. Chaparro, L. F. Menezes, Study on the influence of work-hardening modeling in springback prediction, International Journal of Plasticity 23, 516-543 (2007).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BSW3-0074-0038
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.