PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

The Kinetic of Austenite Grain Growth in Steel for Wind Power Plant Shafts

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
PL
Kinetyka rozrostu ziarna austenitu w stali na wały siłowni wiatrowych
Języki publikacji
EN
Abstrakty
EN
The results of iiwestigations of the influence of the temperaturę and time of austenitising on the austenite grain size in 34CrNiMo6 steel - are presented in the hereby paper. This type of steel is used for wind power plant shafts. Determination of the austenite grain growth kinetics enables designing the heat treatment technology of large forgings in such a way as to obtain uniform and smali grains. The temperaturę and time ranges, which can lead to the abnormal austenite grain growth and in conseąuence to qualitative worsening of forgings (introduction of the so-called structural notches) were determined. When discussing the reasons of the abnormal grain growth the simulation of the carbonitrides dissolving process was taken into account.
PL
W pracy przedstawiono wyniki badań wpływu temperatury i czasu austenityzowania na wielkość ziarna austenitu w stali 34CrNiMo6. Jest to stal stosowana na wały siłowni wiatrowych. Określenie kinetyki wzrostu ziarna austenitu pozwala na projektowanie technologii obróbki cieplnej dużych odkuwek tak aby uzyskać możliwie drobne, równomierne ziarno. Określono zakresy temperatur i czasów austenityzowania, które mogą prowadzić do anormalnego rozrostu ziarna austenitu a w konsekwencji do pogorszenia własności odkuwki (wprowadzenia tzw. karbów strukturalnych). W dyskusji przyczyn wystąpienia anormalnego rozrostu ziarna uwzględniono symulację procesu rozpuszczania węglikoazotków.
Twórcy
autor
autor
  • Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, 30-059 Krakow 30 Mickiewicza Av., Poland
Bibliografia
  • [1] H. V. Atkinson, Theories of normal grain growth in pure single phase systems, Acta Metali. 36, 469-490 (1988).
  • [2] W. C Leslie, The physical metallurgy of steels, Mc Graw Hill Inc, 1982.
  • [3] C. S. Smith, Phases and interfaces: an interpretation of microstructure, Trans. AIME 175, 15-31 (1948).
  • [4] J. Moon, J. Lee, Ch. Lee, Prediction for the austenite grain size in the presence of growing particles in the weld HAZ of Ti-microalloyed steel, Materials Scence and Engineering A 459, 40-46 (2007).
  • [5] Q. Sha, Z. Sun, Grain growth behavior of coarse-grained austenite in a Nb-V-Ti microalloyed steel, Materials Science and Engineering A 523, 77-84 (2009).
  • [6] Q. Yu, Y. Sun, Abnormal growth of austenite grain of low-carbon steel, Materials Science and Engineering A 420, 34-38 (2006).
  • [7] P. R. Rios, Abnormal grain growth development from uniform grain size distributions, Acta Mater. 45, 4, 1785-1789 (1997).
  • [8] A. Danon, C. Servant, A. Alamo, J. C. Brachet, Heterogeneous austenite grain growth in 9Cr martensitic steels: influence of the rate and the austenitization temperature, Materials Science and Engineering A 348, 122-132 (2003).
  • [9] S.-J. Lee, Y.-K. Lee, Prediction of austenite grain growth during austenitization of Iow alloy steels, Materials and Desing 29, 1840-1844 (2008).
  • [10] J. Reiter, C. Bernhard, H. Presslinger, Austenite grain size in the continuous casting process: Metallographic methods and evaluation, Materials Char-acterization 59, 737-746 (2008).
  • [11] M. Dubois, M. Militzer, A. Moreau, J. F. Bussiere, A new techniąue for the quantitative real-time monitoring of austenite grain growth in steel, Scripta Mater. 42, 867-874 (2000).
  • [12] J. Fernandez, S. Illescas, J. M. Guilemany, Effect of microalloying elements on the austenitic grain growth in a Iow carbon HSLA steel, Materials Letters 61, 2389-2392 (2007).
  • [13] J. C. Bruno, P. R. Rios, The grain size distribution and the detection of abnormal grain growth of austenite in an eutectoid steel containing niobium, Scripta Metallurgica et Materialia 32, 4, 601-606 (1995).
  • [14] S. Maropoulos, S. Karagiannis, N. Ridley, The effect of austenitising temperature on prior austenite grain size in a Iow-alloy steel, Materials Science and Engineering A 483-484, 735-739 (2008).
  • [15] I. Andersen, O. Grong, N. Ryum, Analytical modelling of grain growth in metals and alloys in the presence of growing and dissoMng precipitates -II. Abnormal grain growth, Acta Metali. Mater. 43, 7, 2689-2700 (1995).
  • [16] A. Jacot, M. Rappaz, A combined model for the description of austenitization, homogenization and grain growth in hypoeutectoid Fe-C steel during heating, Acta Mater. 47, 5, 1645-1651 (1999).
  • [17] P. R. Rios, M. E. Glicksman, Topological theory of abnormal grain growth, Acta Mater. 54, 5313-5321 (2006).
  • [18] M. Shome, Effect of heat-input on austenite grain size in the heat-affected zonę of HSLA-100 steel, Materials Science and Engineering A 445-446, 454-460 (2007).
  • [19] M. E. Blanter, Theory of heat treatment, Moscow, Mietallurgija, 1984 (in Russian).
  • [20] R. Staśko, H. Adrian, A. Adrian, Effect of nitrogen and vanadium on austenite grain growth kinet-ics of a Iow alloy steel, Materials Characterization 56, 340-347 (2006).
  • [21] H. Adrian, Thermodynamic model for precipitation of carbonitrides in high strength Iow alloy steels containing up to tree microalloying elements with or with-out additions of aluminium, Mater. Sci. Tech. 8, 406-420 (1992).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BSW3-0072-0011
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.