Differential evolution applied to parameter estimation of induction motor

• Autorzy: Subudhi B. , Jena D.
• Języki publikacji: EN

Abstrakty

EN

Control of induction motor drive system requires an exact knowledge of its parameters. Efficient parameter estimation techniques are essential to obtain the parameters such as stator and rotor resistances, leakage and magnetizing inductances, because any mismatch between the actual and computed parameter values may lead to deterioration of control performance of the induction motor drive. In this paper, the differential evolution (DE) strategy - a global optimizer has been exploited for estimation of the above parameters of the induction motor. The main focus of the paper is on the application of the DE strategies to parameter estimation of an induction machine drive system based on the information of its input and output data, where input data comprises the stator voltages and the output data comprises the stator currents. Five different DE strategies were employed for implementing the induction motor parameter estimation schemes. Comparison of the results obtained through an extensive simulation studies on parameter estimations provide an idea how to choose an efficient estimator and to use them for efficiently control the drive.

Słowa kluczowe

EN

differential evolution; induction motor; parameter estimation

• Wydawca: Polish Academy of Sciences, Committee of Automatic Control and Robotics
• Czasopismo: Archives of Control Sciences
• Rocznik: 2009
• Tom: Vol. 19, no. 1
• Strony: 59--80
• Opis fizyczny: Bibliogr. 27 poz., rys.

Twórcy

autor

Subudhi B.

autor

Jena D.

• Department of Electrical Engineering, NIT, India,

Bibliografia

• [1] B. A. DE CARLI and M.L. CAVA: Parameter identification for induction motor simulation. Automatica, 12(4), (1076), 383-386.
• [2] J. HOLTZ and T. THIMM: Identification of the machine parameters in a vector-controlled induction motor drives. IEEE Trans. Ind. Appl, 27 (1991), 1111-1118.
• [3] XING Yu, M.W. DUNNIGAN and B.W.WILLIAMS: A novel rotor resistance identification method for an indirect rotor flux-orientated controlled induction machine system. IEEE Trans. Power Electron., 17(3), 2002, 353-364.
• [4] D. J. ATKINSON, P. P. ACARNLEY and J.W. FINCH: Observers for induction motor state and parameter estimation. IEEE Trans. Ind. AppL, 27(6), (1991), 1119-1127.
• [5] A. GARCIA-CERRADA and J.L. ZAMORA: On-line rotor-resistance estimation for induction motors. Proc. EP’'97, Trondheim, Norway, 1 (1997), 542-547.
• [6] Y. KOUBAA: Parametric identification of induction motor with H-G diagram. Proc. Int. Conf. on Electrical Drives and Power Electronics, High Tatras, Slovak Republic, (2001), 433-437.
• [7] L. A. DE SOUZA RIBEIRO, C.B. JACOBINA and A.M.N LIMA: Linear parameter estimation for induction machines considering the operating conditions. IEEE Trans. Power Electron., 14(1), (1999), 62-73.
• [8] L. A. CABRERA, M. E. ELBULUK and I. HUSAIN: Tuning the stator resistance of induction motors using artificial neural network. IEEE Trans. Power Electron.,12(5), (1997), 779-787.
• [9] K. B. BIMAL and R. P. NITIN: Quasi-fuzzy estimation of stator resistance of induction machines. IEEE Trans. Power Electron., 13(3), (1988), 401-409.
• [10] M. S. GREWAL and A. P. ANDREWS: Kalman nltering-theory and practice. Prentice-Hall, New Jersey, 1993.
• [11] ZAI LI-CHENG, CL. DEMARCO and T.A. LIPO: An extended Kalman filter ap-proach to rotor time constant measurement in PWM induction motor drives. IEEE Trans. Ind. AppL, 28(1), (1992), 96-104.
• [12] E. D. MITRONIKAS, A.N. SAFACAS and E.C. TATAKIS: A new stator resistance tuning method for stator-fiux oriented vector controlled induction motor drive. IEEE Trans. Ind. Electron., 48(6), (2001), 1148-1157.
• [13] J. HA and H.L. SANG: An on-line identification method for both stator and rotor resistances of induction motors without rotational transducers. IEEE Trans. Ind. Electron., 47(4), (2000), 842-853.
• [14] S. H. JEON, K. K. OH and J. Y. CHOI: FIUX observer with online tuning of stator and rotor resistances for induction motors. IEEE Trans. Ind. Electron., 49(3), (2002), 653-664.
• [15] Y. KOUBAA and M. BOUSSAK: Adaptive rotor resistance identification for indirect stator flux oriented induction motor drive. Proc. Second Int. Conf. on Signals, Systems Decision and Information Technology, Sousse, Tunisia, (2003).
• [16] NABEEL A. O. DEMERDASH and J. F. BANGURA: Characterization of induction motors in adjustable-speed drives using a time-stepping coupled finite element state-space method including experimental validation. IEEE Trans. Ind. Appi, 5(4), (1999), 790-802.
• [17] D. J. ATKINSON, P.P. ACARNLEY and J.W. FINCH: Estimationof rotor resistance induction motor. Proc. IEE-Elect Power Appi, 143(1), (1996), 87-94.
• [18] M. CIRRINCIONE, M. PUCCI, G. CIRRINCIONE and G.A. CAPOLINO: A new experimental application of least-squares techniąues for the estimation of the induction motor parameters. IEEE Trans. Ind. Appi, 39(5), (2003), 1247-1256.
• [19] Y. KOUBAA: Induction machine drive parameters estimation. Proc. IEEE Int. Conf. on Systems, Man and Cybernetics, Hammamet, Tunisia, (2002).
• [20] S. MOONL and A. KEYHANI: Estimation of induction machinę parameters from standstill time-domain data. IEEE Trans. Ind. Appi, 30(6), (1994), 1609-1615.
• [21] A. BA-RAZZOUK, A. CHERITI and P SICARD: Implementation of a DSP based real-time estimator of induction motors rotor time constant. IEEE Trans. Power Electron., 17(4), (2002), 534-542.
• [22] J. STEPHAN, M. BODSON and J. CHIASSON: Real-time estimation of the parameters and fluxes of induction motors. IEEE Trans. Ind. Appi., 30(3), (1994), 746-759.
• [23] R. STORN: System design by constraint adaptation and differential evolution. IEEE Trans. Evol. Comput., 3(1), (1999), 22-34.
• [24] H. K. KIM, J. K. CHONG, K.Y. PARK and D.A. LOWTHER: Differential evolution strategy for constrained global optimization and application to practical engineering problems. IEEE Trans. Magnetics, 43(4), (2007), 1565-1568.
• [25] A. SALMAN , A. P. ENGELBRECHT and M.G.H. OMRAN: Empirical analysis of self-adaptive differential evolution. European J. of Operational Research, 183 (2007), 785-804.
• [26] B. K. BOSE: Power electronics and AC drives. Prentice-Hall, New Jersey, 1986.
• [27] L. LJUNG: System identification: Theory for the user. MIT Press, Cambridge, MA, 1980.