Tytuł artykułu
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Wpływ pasm ścinania na ewolucjętekstury w metalach o średniej i dużej energii błędu ułożenia analizowany na przykładzie polikrystalicznej miedzi
Języki publikacji
Abstrakty
Periodic crystal lattice rotations within compact clusters of shear bands (SB), developed in copper (purity of 99.98%), have been characterized to examine the role of lattice re-orientation within grains on slip propagation across grain boundaries. Polycrystalline copper (grain size 50m) was deformed 50% in plane strain compression at room temperature to form two sets of well-defined macroscopic shear bands (MSB). The deformation-induced sub-structures and local changes in crystallographic orientations were investigated by FEG-SEM, equipped with high resolution EBSD. In all the deformed grains examined (within MSBs) a strong tendency to strain-induced re-orientation could be observed. Their crystal lattice rotated in such a way that one of the {111} slip planes became nearly parallel to the direction of maximum shear. A natural consequence of this rotation is the formation of a specific MSB microtexture which facilitates slip propagation across grain boundaries without any visible variation in the slip direction although the slip plane did not coincide exactly in the adjacent grains.
W pracy analizowano zmiany orientacji sieci krystalicznej w obszarach zwartych pakietów makroskopowych pasm ścinania (PS) w polikrystalicznej miedzi o czystości 99.98% i o wyjściowej wielkości ziaren 50μm. Szczególna uwagę skoncentrowano na zagadnieniu propagacji PS poprzez granice ziaren. Próbki odkształcano w płaskim stanie w próbie nieswobodnego ściskania, w temperaturze otoczenia, do momentu, gdy następowało uformowanie się dwu rodzin makroskopowych pasm ścinania. Rozwój tekstury dyslokacyjnej oraz zmiany orientacji analizowano za pomocą systemów pomiaru orientacji lokalnych w mikroskopie skaningowym i transmisyjnym. We wszystkich analizowanych ziarnach w obszarze makroskopowych pasm ścinania obserwowano silna tendencje do rotacji sieci krystalicznej. Kierunek rotacji związany był z obrotem sieci krystalicznej do takiego położenia, w którym jedna z płaszczyzn typu {111} pokrywa się z płaszczyzną ścięcia. Naturalna konsekwencja takiej rotacji jest uformowanie się specyficznej mikrotekstury makroskopowych pasm ścinania. Rotacja ta umożliwia także propagacje pasm poprzez granice ziaren bez widocznej zmiany w kierunku ścięcia.
Wydawca
Czasopismo
Rocznik
Tom
Strony
19--27
Opis fizyczny
Bibliogr. 18 poz., rys.
Bibliografia
- [1] E. El-Danaf, S. R. Kalidindi, R. D. Doherty, C. Necker, Deformation texture transition in α-brass: critical role of micro-scale shear bands, Acta Materialia 48, 2665-2673 (2000).
- [2] P. Wagner, O. Engler, K. Lücke, Formation of Cu-type shear bands and their influence on deformation and texture of rolled f.c.c. {112}<111> single crystals, Acta Metall. Mater. 43, 3799-3812 (1995).
- [3] Z. Jasieński, T. Baudin, A. Piątkowski, R. Penelle, Orientation changes inside shear bands occurring in channel-die compressed (112)[1-1-1] copper single crystals, Scripta Materialia 35, 397-403 (1996).
- [4] H. Paul, M. Darrieulat, A. Piątkowski, Local Orientation Changes and Shear Banding in {112}<111>-Oriented Aluminium Single Crystals, Z. Metallkd. 92, 1213-1221 (2001).
- [5] H. Paul, J. H. Driver, C. Maurice, Z. Jasieński, The Structure of Shear Bands in Twinned FCC Single Crystals, Mat. Sci. Engn. A359, 178-191 (2003).
- [6] H. Paul, A. Morawiec, E. Bouzy, J. J. Fundenberger, A. Piątkowski, On Brass-type Shear Bands and their Influence on Goss and Brass Texture Components, Metallurgical & Material Transactions 35A, 3775-3786 (2004).
- [7] H. Paul, J. H. Driver, C. Maurice, A. Piątkowski, The role of shear banding on deformation texture in low stacking fault energy metals as characterized on model Ag crystals, Acta Materialia 55, 833-847 (2007).
- [8] H. Paul, A. Morawiec, J. H. Driver, E. Bouzy, On twinning and shear banding in a Cu-8 at.%Al alloy plane strain compressed at 77K, International Journal of Plasticity, DOI: 10.1016/j.ijplas.2008.10.003, article in press (2009).
- [9] C. Donadille, R. Valle, P. Dervin, R. Penelle, Development of texture and microstructure during cold-rolling and annealing of F.C.C. alloys: Example of an austenitic stainless steel. Acta metallurgica 32, 1547-1571 (1989).
- [10] A. Weidner, P. Klimanek, Shear banding and texture development in cold rolled αbrass, Scripta Materialia 38, 851-856 (1998).
- [11] C. S. Da Costa Viana, J. C. Parades, A. L. Pinto, A. M. Lopez, EBSD analysis of shear banding In α-brass, in: J. Szpunar (Ed.), Proceeding of the 12th International Conference on Textures of Materials, Trans. Tech. Publ., Toronto, Canada, 671-676 (1999).
- [12] H. Inagaki, M. Koizumi, C. S. T. Chang, B. J. Duggan, Orientation imaging microscopy of the shear bands formed in Al-5%Mg alloys during cold rolling, Mater. Sci. Forum 587-592, 396-402 (2002).
- [13] A. Huot, R. A. Schwarzer, J. H. Driver, Texture of shear bands in Al-Mg3% (AA5182) measured by BKD, Mat. Sci. Forum 273-275, 319-326 (1998).
- [14] A. A. Ridha, W. B. Hutchinson, Recrystallization mechanisms and the origin of cube texture in copper, Acta metallurgica 30, 1929-1939 (1982).
- [15] D. Dörner, Y. Adachi, K. Tsuzaki, Periodic crystal lattice rotation in microband groups in a bcc metal, Scripta Materialia 57, 775-778 (2007).
- [16] D. Dörner, S. Zaeffere r, D. Raabe, Retention of the Goss orientation between microbands during cold rolling of an Fe3%Si single crystal, Acta Mater. 55, 2519-2530 (2007).
- [17] K. Mori i, H. Mecking, Y. Nakayama, Development of shear bands in fcc single crystals. Acta metallurgica 33, 379-386 (1985).
- [18] A. Korbel, P. Martin, Microscopic versus macroscopic aspect of shear bands deformation, Acta metalialia 34, 1905-1909 (1986).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BSW3-0060-0002