Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
proces redukcji zuzla konwertorowego przy różnych sposobach wprowadzania reduktora
Języki publikacji
Abstrakty
Findings of laboratory tests of the converter slag reduction process in an electric arc furnace are presented in this paper. Slag premixed with carbon reducer was used for the tests, reducer was also injected in an air jet with a lance. Based on the tests performed it was found that injection of the reducer slowed down the reduction process due to poorer utilisation of the reducer. It was also found that the reduction process rate increased along with the growth in Al2O3 content in the phase reduced. At the same time its content in the resulting non-metallic phase increased. Therefore the mass of the Al.2O3 added should be subject to its content in the converter slag.
W artykule przedstawiono wyniki badań procesu redukcji żużla konwertorowego w elektrycznym piecu łukowym, w warunkach laboratoryjnych.W czasie badań stosowano żużel wymieszany z reduktorem węglowym, a także wdmuchiwano reduktor przy pomocy lancy w strumieniu powietrza. Na podstawie przeprowadzonych badań stwierdzono, że wdmuchiwanie reduktora powoduje zmniejszenie szybkości procesu redukcji z powodu gorszego wykorzystania reduktora. Stwierdzono również, że szybkość procesu redukcji wzrasta wraz ze wzrostem zawartości Al2O3 w redukowanej fazie. Jednocześnie wzrasta również zawartość tego składnika w otrzymywanej fazie niemetalicznej. Z tego powodu masa wprowadzanego Al2O3 powinna być uzależniona od jego zawartości w żużlu konwertorowym.
Słowa kluczowe
Wydawca
Czasopismo
Rocznik
Tom
Strony
156--160
Opis fizyczny
Bibliogr. 9 poz., rys. tab.
Twórcy
autor
autor
autor
- Faculty of Metallurgy and Materials Science, AGH University of Science and Technology, 30-059 Kraków, Al. Mickiewicza 30
Bibliografia
- [1] S. Kubodera, T. Koyama,R. Ando, R. Kondo, Transactions of the Iron and Steel Institute of Japan 19, 7, 419-427 (1979).
- [2] J. Piret, A. Dralants, Stahl und Eisen 104, 16, 774-778 (1984)
- [3] G. A. Li, F. Zhang, L. Zhang, Z. T. Sui, Journals of Materials and Metallurgy 2, 3, 167-172 (2003).
- [4] M. Dziarmagowski, M. Karbowniczek, M. Pyzalski, J. Okoń, Ironmaking and Steelmaking 19, 1, 45-49 (1992).
- [5] M. Dziarmagowski, Archives of Metallurgy and Materials 47, 3, 287-295 (2002).
- [6] M. Dziarmagowski, Archives of Metallurgy and Materials 48, 2, 201-207 (2003).
- [7] M. Dziarmagowski, Archives of Metallurgy and Materials 49, 1, 73-81 (2004).
- [8] M. Dziarmagowski, Archives of Metallurgy and Materials 49, 3, 699-704 (2004).
- [9] J. Geisseler, 6th International Conference on Molten Slags, Fluxes and Salts, Stockholm-Helsinki, 12-17 June, 2000, 1-14.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BSW3-0024-0022