PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

The effect of the rolling geometry on the texture and microstructure in AZ31 and copper

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
PL
Wpływ geometrii walcowania na teksturę i mikrostrukturę stopu AZ31 i miedzi
Konferencja
MicroCEM - Workshop on Progress in Microstructure Characterization by Electron Microscopy (30.09-02.10.2005 ; Zakopane, Polska)
Języki publikacji
EN
Abstrakty
EN
The destabilization phenomena in texture and microstructure caused by the change of the deformation path are considered in an AZ31 magnesium alloy. The study, based on individual grain orientation measurements in the SEM by COM/EBSD, is a continuation of earlier investigation on copper. The phenomena in materials caused by the destabilization provide new information about the mechanism of plastic deformation and its structure-texture effects which are valuable for the solving basic problems of controlling mechanical properties.
PL
Przedmiotem pracy jest zjawisko destabilizacji w teksturze i mikrostrukturze wywołane zmianą drogi odkształcenia w stopie magnezu AZ31 i w miedzi. Badania oparte na pomiarach pojedynczych orientacjach techniką COM/EBSD w SEM, stanowią kontynuację wcześniejszych prac nad miedzią. Zjawiska w materiałach wywołane destabilizacją dostarczają nowych informacji cennych dla rozwiązania podstawowych problemów sterowania właściwościami mechanicznymi.
Twórcy
autor
autor
autor
  • Institute of Metallurgy and Materials Science, Polish Academy of Sciences, 30-059 Kraków, 25 Reymonta St.,
Bibliografia
  • [1] Z. Jasieński, J. Pospiech, A. Piątkowski, R. A. Schwarzer, A. Litwora, M. Ostafin, Textural and structural effects of the change of deformation path in copper single crystals in a channel-die test. Archives of Metallurgy and Materials 49, 11-28 (2004).
  • [2] M. Ostafin, J. Pospiech, R. A. Schwarzer, Microstructure and texture in copper sheets after reverse and cross rolling. Solid State Phenomena 105, 309-314 (2005).
  • [3] J. Pospiech, Z. Jasieński, M. Ostafin, R. A. Schwarzer, Local and global effects in texture and microstructure observed after channel die-compression of copper single crystals and after cross rolling of copper sheets. Solid State Phenomena 105, 321-326 (2005).
  • [4] M. Ostafin, J. Pospiech, R. A. Schwarzer, The evolution of deformation texture in copper by unidi-rectional and cross rolling. Archives of Metallurgy and Materials 50, 409-415 (2005).
  • [5] J. Pospiech, M. Ostafin, R. A. Schwarzer, Tekstura i mikrostruktura (i ich wzajemne relacje) po walcowaniu poprzecznym i diagonalnym, Materiały Seminarium poświęcone 70. rocznicy urodzin Profesora Z. Jasieńskiego, 49-59, 21. stycznia (2005).
  • [6] A. Korbel, J. Pospiech, Sterowanie teksturą i mikrostrukturą i własnościami przez odkształcenie plastyczne, Prace Komisji Nauk Technicznych PAU, pod red. R Tadeusiewicza 1, 155-165 (2005).
  • [7] J. Pospiech, Z. Jasieński, A. Litwora, A. Piątkowski, The influence of transverse rolling on texture and microstructure. Proc. of 12th ICOTOM, 581-586, Montreal (Canada) 1999.
  • [8] M. Wróbel, M. Blicharski, S. Dymek, J. Gazdowicz, Influence of strain path on texture and microstructure development in polycrystalline Cu and Cu-5 wt% Al alloy. La Revue de Metallurgie 94, 1045-1055 (1997).
  • [9] R. A. Schwarzer, Automated crystal lattice orienta-tion mapping using a computer-controlled SEM. Micron 28, 249-265 (1997).
  • [10] R. A. Schwarzer, Measurement of macro-texture by ACOM - An alternative to XRD. Materials Science and Technology 16, 1384-1388 (2000).
  • [11] R. Gehrmann, Magnesium - Einfluss der Textur auf das Umfornwerhalten. Diss. RWTH Aachen 2004. Shaker-Verlag Aachen.
  • [12] A. Styczyński, Ch. Hartig, J. Bohlen, D. Letzig, Cold rolling textures in AZ31 wrougth magnesium alloy, Ser. Mat. 50, 943-947 (2004).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BSW3-0024-0006
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.