Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
Określanie temperatury Ms i rozpadu austenitu resztkowego w stali niskowęglowej 0,2C/1,5Mn/1,5 Si
Języki publikacji
Abstrakty
The paper presents magnetometric measurements of the decomposition of retained Atustenite brought about by low-temperature bainite transformation, and also the structure obtained and mechanical properties. The data included herein indicates that the bainite transformation- taking place at low temperatures, or at higher temperatures over shorter periods, produces two types of austenite with varying stabilities. The less stable austenite disintegrates when cooled to -196°C, while the second - only when heated up to 560°C. The first type is present in the form of large grains, while the second is more scattered and locates between the bainite areas. Their stability during plastic strain also differs; the former disintegrates already at small strain, without making a contribution to the TRIP effect.
W pracy przedstawiono magnetometryczne pomiary rozpadu austenitu resztkowego powstałego w wyniku niskotemperaturowej przemiany bainitycznej, oraz otrzymaną strukturę i własności mechaniczne. Przedstawione dane wskazują, że przemiana bainityczna przebiegajaca przy niskich temperaturach, lub przy temperaturach wyższych ale krótkich czasach, wytwarza dwa rodzaje austenitu o różnej stabilności. Mniej stabilny rozpada się podczas chłodzenia do -196C, drugi dopiero podczas nagrzewania do 560C. Pierwszy występuje w postaci dużych ziaren, drugi jest bardziej rozdrobniony znajduje się pomiędzy obszarami bainitu. Różna jest też ich stabilność podczas odkształcania próbki. Pierwszy rozpada się już przy małych odkształceniach, nie wnosząc swego wkładu w efekt TRIP.
Słowa kluczowe
Wydawca
Czasopismo
Rocznik
Tom
Strony
981--994
Opis fizyczny
Bibliogr. 8 poz., rys., tab.
Twórcy
autor
- Wydział Metalurgii Inżynierii Materiałowej, Akademia Górniczo-Hutnicza, Al. Mickiewicza 30, 30-059 Kraków
autor
- Wydział Metalurgii Inżynierii Materiałowej, Akademia Górniczo-Hutnicza, Al. Mickiewicza 30, 30-059 Kraków
autor
- Wydział Metalurgii Inżynierii Materiałowej, Akademia Górniczo-Hutnicza, Al. Mickiewicza 30, 30-059 Kraków
autor
- Wydział Metalurgii Inżynierii Materiałowej, Akademia Górniczo-Hutnicza, Al. Mickiewicza 30, 30-059 Kraków
Bibliografia
- [1] W. Bleck, International Conference on TRIP-Aided High Strength Ferrous Alloys, Gent, Belgium, 13-23 June 19-21, 2002.
- [2] D. C. Ludwigson, J. A. Berger, JISI 192, 63-69 (1969).
- [3] Suzelotte Kruijver et al., International Conference on TRIP-Aided High Strength Ferrous Alloys. Gent. Belgium, pp. 25-29 June 19-21, 2002.
- [4] A. Kruk, L. B. Magalas, W. Osuch, J. Pietrzyk, G. Rigaut, S. Gorczyca, Proceedings of the 14th International Scientific Conference ADVANCED MATERIALS & TECHNOLOGIES, Zakopane. Poland, 255-258 May 17-21, 1995.
- [5] M. De Meyer, J. Mahieu, B. C. De Cooman, Mater. Sci. Technol. 18, 1121-1132 (2002).
- [6] J. Pietrzyk, A. Maksymowicz, G. Michta, Metallurgy and Foundry Engineering 23, 3, 341-347 (1997).
- [7] W. Osuch et al, IX Conference on Electron Microscopy in Solids, 263- 266 Krakow, Poland, 1996.
- [8] E. Wirthl et. al, International Conference on TRIP-Aided High Strenght Fer rous Alloys, Gent Belgium, 61-64 June 19-21, 2002.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BSW3-0011-0022