PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Wpływ stanu strukturalnego na niektóre własności użytkowe warstw nawęglonych lub azotonawglanych wytworzonych na stalach konstrukcyjnych

Identyfikatory
Warianty tytułu
EN
The infuence of structure on some properties of carburized or carbonitrided layers produced on constructional steels
Konferencja
Problemy metaloznawstwa w technice XXI wieku (2000 ; Kielce, Polska)
Języki publikacji
PL
Abstrakty
PL
W artykule podjęto próbę wyjasnienia wpływu struktury zahartowanych warstw nawęglonych lub azotonawęglanych wytworzonych na stalach chromowych lub chromowoniklowych na własności użytkowe tych warstw. Uzyskane wyniki badań i obliczeń pozwoliły stwierdzić, że przy określonej zawartości węgla lub węgla i azotu uzyskuje się maksimum w wartościach udziału austenitu szczątkowego oraz określony udział cementytu. Korelują one z określonymi wartościami ściskającymi naprężeń własnych i twardości oraz wykazują najwyższą odporność na zużycie ścierne warstw. W pracy zaprezentowano także model matematyczny prognozujący skład chemiczny i fazowy warstw dyfuzyjnych oraz naprężenia własne.
EN
Effect of the structure state on some properties of diffusion coatings produced on constructional steels in carburizing and carbonitriding process. The effect of structure of hardened carburized or carbonitrided layers produced on chromium or chromium or chromium-nickelsteels on working properties of these layers has been investigated. The obtained experimental and calculation results permitted to ascertain that definite carbon or carbon and nitrogen concentration brought about maximum content of retained austenite and definite amount of cementite. These results correlate with compressive residual stresses, high hardness and maximum wear resistance of diffusion layers. It is also presented mathematical model, which permits to forecast chemical and phase composition of diffusion layers and their residual stresses.
Rocznik
Tom
Strony
97--117
Opis fizyczny
Bibliogr. 57 poz., rys., wykr.
Twórcy
  • Politechnika Poznańska, Instytut Inżynierii Materiałowej, Zakład Obróbki Cieplnej, pl. M. Skłodowskiej-Curie 5, PL - 60 965 Poznań
autor
  • Politechnika Poznańska, Instytut Inżynierii Materiałowej, Zakład Obróbki Cieplnej, pl. M. Skłodowskiej-Curie 5, PL - 60 965 Poznań
Bibliografia
  • [1] Peyre J.P., Tournier C.: Choix des traitements thermiques superficiels; Center technique des Industries Mécaniques, Paris (1985)
  • [2] Przyłęcka M.: Materiałowo-technologiczne aspekty trwałości łożysk tocznych., Politechnika Poznańska, Seria Rozprawy Nr 202, Poznań (1988), 300 str.
  • [3] Prospekt firmy Union Carbide Corporation. UCON® Quenchants E and E-NN.; Ucon Fuids&Lubricants-UCON® Quenchants A and A-NN.; UCON® Quenchants HT and HT-NN Danbury
  • [4] Liščić B., Tensi H.M., Luty W.: Theory and Technology of Quenching. Springer-Verlag, London (1992), 484 str.
  • [5] Luty W.: Chłodziwa hartownicze. Wydawnictwo Naukowo-Techniczne, Warszawa (1986), 200 str.
  • [6] Przyłęcka M.: Journal of Materials Engineering and Performance, ASM International, Materials Park, Ohio, Journal of Materials Engineering and Performance, VoI. 5(2) (1996)
  • [7] Gęstwa W.: Azotonawęglanie wybranych stopów Fe-Cr-Mn-Si, Praca doktorska, Politechnika Poznańska, Poznań 1997
  • [8] Przyłęcka M., Gęstwa W.: „MAT-TEC 97”, „Analysis of residual stresses from materials to bio-materials”. IITT International, 1997
  • [9] Przyłęcka M., Gęstwa W.: Inżynieria Materiałowa, nr 4 (105), lipiec-sierpień 1998
  • [10] Przyłęcka M., Gęstwa W.: 3rd International Conference On Quenching And Control Of Distortion ASM, 24-26.03.1999, Praga, Czechy
  • [11] Przyłęcka M., Gęstwa W.: 3rd International Conference On Quenching And Control Of Distortion ASM, 24-26.03.1999, Praga, Czechy
  • [12] Przyłęcka M., Gęstwa W.: Inżynieria Materiałowa, nr 5 (112) (1999)
  • [13] Grysa K., Przyłęcka M., Przyłęcki Z.: Prace Badawcze Komisji Technologii Budowy Maszyn PAN, Oddział w Poznaniu, z. 2 (1981), ss. 125-140
  • [14J Lesage J., Chicot D., Przyłęcka M., Kulka M., Gęstwa W.: Traitement Thermique, 276 (1994), ss. 42-46
  • [15] Gęstwa W., Przyłęcka M., Kulka M.: Archiwum Technologii Budowy Maszyn, z. 13, Poznań, 1994, ss. 111-121
  • [16] Przyłęcka M., Gęstwa W.: Inżynieria Powierzchni, nr 2, czerwiec 1999, Warszawa, ss. 31-37
  • [17] Gęstwa W., Przyłęcka M., Kulka M.: The Second ASM Heat Treatment And Surface Engineering Proceedings And Exhibition In Europe; Dortmund (Germany) Westfallenhallen, 1-3 June 1993, ss. 239-246
  • [18] Przyłęcka M., Pertek A.: AMT’92, XIII Konferencja Metaloznawcza - Nowoczesne Materiały i Technologie. Warszawa - Popowo, 23-25.09.1992, ss. 215-216
  • [19] Przyłęcka M., Kulka M., Gęstwa W.: International Heat Treating Conference: Equipment and Processes, Hyatt Regency Woodfield, Schaumburg, Illinois (USA) 18-20.04.1994, ss. 233-238
  • [20] Gęstwa W., Przyłęcka M., Kulka M.: 9th International Conference on Heat Treatment and Surface Engineering, Nice (France), 26-28.09.1994, ss. 507-508
  • [21] Pertek A., Przyłęcka M.: Seminarium „Metodyczne problemy pomiarów naprężeń własnych”, Poznań-Puszczykowo, 1-2 XII 1994
  • [22] Przyłęcka M., Kulka M., Gęstwa W.: Extenden Abstracts Volume, 14th International Scientific Conference Advanced Materials & Technologies, Gliwice-Zakopane, Poland, 17-21 May 1995, ss. 369-372
  • [23] Gęstwa W.; Przyłęcka M.; Kulka M.: 4th International Scientific Conference Achievements in Mechanical & Materials Engineering, Gliwice-Wisła, November 30th - December 1st 1995, ss. 109-112
  • [24] Przyłęcka M., Gęstwa W.: Międzynarodowego Seminarium „Inżynieria Powierzchni 97”, Warszawa, 1997, ss. 27-32
  • [25] Przyłęcka M., Gęstwa W.: Międzynarodowego Seminarium „Inżynieria Powierzchni 97”, Warszawa 1997. ss. 27a-32a
  • [26] Przyłęcka M., Gęstwa W.: Międzynarodowego Seminarium „Inżynieria Powierzchni 97", Warszawa, 1997, ss. 33-38
  • [27] Lee, H-Y: Journal of the Korean Institute of Metals and Materials (South Korea), vol. 34, no. 2, Feb. 1996, pp. 150-157
  • [28] Lesage J., Chicot D., Al Karaischi M.: Steel Research, 60(8) (1989), ss. 370-374
  • [29] Parrish G.: The Influence of Microstructure on the Properties of Case-Carburized Components American Society for Metals, Metals Park, Ohio 44073, 1980, 193 str.
  • [30] Rangaswamy P., Bourke, MAM, Lawson A.C., O’Rourke J., Goldstone J.A.: Government Research Announcements and Index (USA), 1995, pp. 13-19
  • [31] Przyłęcka M., Gęstwa W.: Inżynieria Powierzchni, nr 2, Warszawa, czerwiec 1999
  • [32] Totten G.E., Dakins M.E., Heins R.W.: Journal of Heat Treating, 6(2) (1988), pp. 87-95
  • [33] Totten G.E., Dakins M.E., Jarvis L.M.: Journal of Heat Treating, 12(1989), pp. 28-29
  • [34] Dakins M.E., Bates C.E,. Totten G.E.: Journal of Heat Treating, April 1992, pp. 24-26
  • [35] Janowski S.: Metaloznawstwo, Obróbka Cieplna, Inżynieria Powierzchni, 79 (1986), s. 6-12
  • [36] Burakowski T., Senatorski J., Tacikowski J.: Trybologia, 6 (1986), ss. 4-8
  • [37] Senatorski J., Tacikowski J.: Trybologia, No. 2, 1988, ss. 11-15
  • [38] Mittemeijer E.J., Slycke J.T.: Heat Treatment of Metals, vol. 23, no. 3, pp. 67-71, 1996
  • [39] Movchan V.I., Dolzhenkov I.E, Movchan A.V.: Metallovedenie i Termicheskaya Obrabotka Metalloy, no 5, May 1995, ss. 4-7
  • [40] Murai N., Takayama T. i inni: Journal of the Iron and Steel Institute of Japan, vol. 83, no 3, Mar 1997, pp. 215-220
  • [41] Moon W J., Kano C.Y, Suno J.M.: Journal of the Korean Institute of Metals and Materials, vol. 35, no 3, Mar 1997, ss. 297-304
  • [42] Nosov V.B., Yurasov S.A.: Metal Science and Heat Treatment, vol. 37, no 1, Jan. 1995, pp. 16-21
  • [43] Nosov V.B., Yurasov S.A.: Metallovedenie i Termicheskaya Obrabotka Metalloy, No 1, Jan 1995, ss. 19-24
  • [44] Tikhonov A.K., Palagin YUM.: Metal Science and Heat Treatment, vol. 36, no 11-12, May 1995, pp. 655-657
  • [45] Heat Treatment of Metals (China), vol. 2, Feb. 1997, pp. 10-12
  • [46] Burakowski T., Wierzchoń T.: Surface Enginnering of Metals, CRC Series in Materials Science and Technology, CRC Press, New York (1999)
  • [47] Brerwirch G.: Schweiz Archiv 4(1964), p. 104
  • [48] Mendiratta M.G., Sasser J., Krauss G.: Metal. Transactions., 62(1969), pp. 351-353
  • [49] Grange R.A.: Metal. Transactions., 62(1969), pp. 1024-1027
  • [50] Apple F.A., Krauss G.: Metal. Transactions., 4(1973), pp. 1195-1200
  • [51] Krauss G.: Metal. Transactions., 9A(1978), pp. 1527-1535
  • [52] Gulalev A.P., Serebriusikov L.N.: Metallovedenie i Termicheskaya Obrabotka Metalloy, 4(1977), ss. 2-5
  • [53] Baiter M.A., Dukarevicz J.S.: Metallovedenie i Termicheskaya Obrabotka Metalloy, 7(1985), ss. 50-53
  • [54] Baiter M.A., Dukarevicz J.S.: Metallovedenie i Termicheskaya Obrabotka Metalloy, 9(1979), ss. 20-24
  • [55] Degallaix G., Chicot D., Baralis J., Lesage J.: Modéle simplifié contraintes résiduelles dans les couches traités superficiellement. Mémoires et Études Scientifiques Revue de Métallurgies Féviev 1990, ss. 113-122
  • [56] Kulka M., Przyłęcka M., Gęstwa W.: Wybrane zagadnienia nawęglania. ze szczególnym uwzględnieniem obszaru dwufazowego austenit - cementyt. Instytut Badań i Ekspertyz Naukowych, Gorzów 1993, 164 str.
  • [57] Przyłęcka M., Gęstwa W.: The modelling of structure and properties of carburizing or carbonitriding layers, as well as hardening in different quenchning mediums; przyjętego na konferencje the 1st International Conference on Reatained Austenite, która odbywa się w ramach the 20th Heat Treating Society Conference and Exposition, October 9-12 2000, St. Louis, Missouri, USA
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BSW2-0022-0002
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.