PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

The assessment of the resilient modulus of elasticity of asphalt concrete with low-viscosity modifier

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
PL
Badania modułu sztywności sprężystej betonu asfaltowego z asfaltem niskowiskozowym
Języki publikacji
EN
Abstrakty
EN
Based on the experiments it was found that the operating temperature significantly influenced the resilient modulus of elasticity of asphalt concrete. The study was intended for asphalt concrete used for the wearing course AC 11 S. In the experiment bitumen 35/50 was used which was modified with synthetic wax (Fisher-Tropsh) in the range of 1.5% - 4.0% with steps every 0.5%. The asphalt concrete has been compacted at the optimum characteristic temperature of 125°C. The study revealed a low susceptibility of temperature of asphalt concrete with asphalt low-viscosity in the range of 5°C to 25°C. In addition a negative impact of the lack of compaction level on resilient modulus of elasticity of the asphalt concrete was found.
Rocznik
Strony
16--20
Opis fizyczny
Bibliogr. 9 poz., rys., wykr.
Twórcy
autor
  • Kielce University of Technology, Faculty of Civil and Environmental Engineering, al. Tysiąclecia Państwa Polskiego 7, 25-314 Kielce, Poland, gmazurek@tu.kielce.pl
Bibliografia
  • [1] Stefańczyk B., Mieczkowski P.: Mineral mix asphalt, WKiŁ, Warsaw 2008.
  • [2] PN-EN 12697-26:2004 Hot mix asphalt - requirements - Test methods for hot mix asphalt: Stiffness.
  • [3] Product Information, The Bitumen Additive for Highly Stable Easy Compactible Asphalts, 2008.
  • [4] Gaweł I., Kalabińska M., Piłat J.: Asfalt drogowy [Road bitumen], WKŁ, Warsaw, 2001
  • [5] Iwański M., Mazurek G.: Asphalt concrete of low-viscosity modifier, 2nd International Conference on Transport Infrastructures in Sao Paulo, Brazil, August 2010.
  • [6] Grubbs F.E.: Procedures for detecting outlying observation in samples, Technometrics, Vol. 11, No 1, p 1-21, February 1969.
  • [7] Guide to Expression Uncertainty in Measurement, ISO Switzerland 1995.
  • [8] Piasta Z., Lenarcik A.: Methods of statistical multi-criteria optimisation, [in:] A.M. Brandt (ed.), Optimization Methods for Material Design of Cement based Composites, E & FN Spon, London, New York, 1998, pp. 45-59.
  • [9] Montgomery D.G., Design and Analysis of Experiments, 5th Edition, John Wiley and Sons, 2001.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BSW1-0089-0002
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.