Identyfikatory
Warianty tytułu
Możliwości zastosowania mikropowierzchni strukturalnych w ogrzewnictwie i wentylacji
Języki publikacji
Abstrakty
Microstructural coatings may by successfully applied in phase-change heat exchangers to enhance heat transfer. They can be used in heating and ventilation systems as presented in the literature review. The test results of boiling heat transfer prove that it is possible to significantly increase heat flux comparing to the smooth surface if porous microstructures are applied. The measurements were conducted on the non-isothermal surface of the fin. Distilled water was used as the working fluid.
Słowa kluczowe
Czasopismo
Rocznik
Tom
Strony
41--45
Opis fizyczny
Bibliogr. 9 poz., rys., wykr.
Twórcy
autor
- Kielce University of Technology, Al. 1000-lecia Państwa Polskiego 7, 25-314 Kielce, Poland, orman@tu.kielce.pl
Bibliografia
- [1] Webb R.L. (1981): The evolution of enhanced surface geometries for nucleate boiling, Heat Transfer Engineering, Vol. 2, pp. 46-69.
- [2] Manglik R.M. (2003): Heat Transfer Enhancement, in Heat Transfer Handbook, ed. Bejan A., Kraus A.D., John Wiley&Sons Inc.
- [3] Gottzmann C.F., Wulf J.B., O’Neill P. (1971): Theory and application of high performance boiling surfaces to components of absorption cycle air conditioners, Proc. Conf. Natural Gas. Res. and Techn., Chicago, pp. 1-14.
- [4] Thome J.R. (2004): Engineering Data Book III, Wolverine Tube.
- [5] Silverstein C.C. (1992): Design and technology of heat pipes for cooling and heat exchange, Washington.
- [6] Ochterbeck J.M. (2003): Heat Pipes, in Heat Transfer Handbook, Bejan A., Kraus A.D. (ed), Wiley John & Sons Inc.
- [7] Abd El - Baky M.A., Mohamed M.M. (2007): Heat pipe heat exchanger for heat recovery in air conditioning, Applied Thermal Engineering, Vol. 27, pp. 795-801.
- [8] Orzechowski T. (2003): Wymiana ciepła przy wrzeniu na żebrach z mikropowierzchnią strukturalną, Monografia, Wydawnictwo Politechniki Świętokrzyskiej, Kielce.
- [9] Orman Ł.J. (2008): Nucleate boiling heat transfer on a smooth surface of a fin, Proc of XII Int. Symposium „Heat Transfer and Renewable Sources of Energy”, Szczecin, pp. 363-369.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BSW1-0085-0014