Relationship M(k) on the basis of research on beams subjected to changing loads

• Autorzy: Ślusarczyk J.

Warianty tytułu

PL

Zależność M(k) na podstawie wyników badań belek poddanych obciążeniom zmiennym

• Języki publikacji: EN

Abstrakty

EN

While calculating reinforced concrete constructions the relationship momentum - curvature M(κ) has significant importance. In exploitation conditions reinforced concrete construction is subjected to increasing loading and unloading. In bent moments, performing even a few cycles of static loading and unloading causes increase in temporary deflection. Building a unified model of relationship M(κ) describing the whole range from the elastic state to the full plasticisation, allowing for variable reversible loads (hysteresis loop) requires further investigations. Degradation of cross section stiffness is the result of damage process and plasticisation. Unified description of processes taking place in reinforced concrete beam cross section can be obtained with the use of elastic work probability, plastic work probability and damage relating cross section stiffness.

Słowa kluczowe

EN

concrete beams; changing loads

PL

belka betonowa; obciążenia zmienne

• Wydawca: Wydawnictwo Politechniki Świętokrzyskiej
• Czasopismo: Structure and Environment
• Rocznik: 2009
• Tom: Vol. 1, no. 1
• Strony: 22--34
• Opis fizyczny: Bibliogr. 18 poz., rys., wykr., wzory

Twórcy

autor

Ślusarczyk J.

• Kielce University of Technology, Al. Tysiąclecia Państwa Polskiego 7, 25-314 Kielce, Poland,

Bibliografia

• [1] Czkwianianc A., Kamińska M.: Method of nonlinear analysis of reinforced iron rod’s elements. Engineering Studies nr 36, Warsaw 1993.
• [2] Pawlikowski J.: Relations formed during analysis in bar reinforced constructions. ITB, Warsaw 1992.
• [3] Wranik J.: Calculation of rigidity in reinforced constructions based on non-linear elasticity model. Scientific Notebook from Zielona Góra University. Zielona Góra 2003.
• [4] Knauf M. et. al.: Fundamentals for design of the reinforced and stressed consctructions according to Eurocode 2. Concrete Section of the Polish Academy of Sciences (KILiW PAN). DWE, Wrocław 2006.
• [5] Bąk G., Szczeniak Z.: Integral physic’s principle for bent reinforced cross-section. Part I - Loading process, Part II - Unloading process. Bulletin of the Military Technical Academy (WAT) nr 10 (350), 1981.
• [6] Bąk G., Szczeniak Z.: Generalized physical relations holding for eccentricly compressed cross-sections. AIL, t. XXXVII, z. 3-4, 1991.
• [7] Hoła J.: Initial and critical compressive stress and rupture in compressed concrete. Scientific Papers of IB PW, Wrocław 2000.
• [8] Ubysz A: Plastic strain and self-stress in bar reinforced concrete constructions. Scientific Papers of IB PW, Wrocław 1999.
• [9] Goszczyński S.: Theory of continuous rigidity changes upon stochastic model of the reinforced concrete. Scientific Papers of Technical University Kielce, Civil Engineering, 23/1986.
• [10] Goszczyński S.: Hypothesis of exponential rigidity changes in bend reinforced concrete beams, Scientific Conference Notebook (WBL PŁ), Łódź 1971.
• [11] Goszczyński S., Mucha J.: Problem of initial and recurrent rigidity in bend beams from reinforced concrete elements in view of experimental investigations. Scientific Papers of Technical University Kielce, Civil Engineering, 9/1980.
• [12] Zboś D.: Numerical methods. Wyd. PK, Kraków 1991.
• [13] Kordina K.: Load-carrying ability and deformation in reinforced beams under bend and simultaneous constrainment as result of support dispalacement, DafST H. 336. Berlin 1982.
• [14] Kuczyński W., Tkaczyk S.: Study of continuous reinforced concrete beams, AIL XXVII, nr 4, s. 559-583/1981.
• [15] Goszczyński S., Ślusarczyk J: Approximation of secant rigidity considering calculation error based on applied research. XLII Scientific Conference of the Polish Academy of Sciences, (KILIW PAN I KN PZITB), 75-82, Krynica 1996.
• [16] Ślusarczyk J.: Measurement reaction of the three bay reinforced beam considering the error calculus. Polish Academy of Science in Wroclaw Board of Building Engineering and Mechanics - Concrete constructions - Theory and experimental studies, pp. 50 - 62, Wrocław 1999.
• [17] Jaworski J.: Matematical Fundamentals in metrology. WNT, Warsaw 1979.
• [18] Benjamin J.R., Kornel C.A.: Probability, statistics and decision theory for engineers. WNT, Warsaw 1977.