Statistical validation of the method for measuring radius variations of components on the machine tool

• Autorzy: Adamczak S. , Janusiewicz A. , Makieła W. , Stępień K.
• Języki publikacji: EN

Abstrakty

EN

This paper deals with the experimental validation of the suitability of the method for measuring radial variations of components on the process tool. The tests were conducted using a computerized PSA6, which was compared to a Talyrond 73. The results of measurement of roundness deviations as well as roundness profiles were analyzed for a sample of 70 shafts. The roundness deviations were assessed by determining the experimental errors, while the profiles obtained with the tested device were compared to those registered by the reference device using three correlation coefficients.

Słowa kluczowe

EN

roundness; experimental method error; process tool

• Wydawca: Komitet Metrologii i Aparatury Naukowej PAN
• Czasopismo: Metrology and Measurement Systems
• Rocznik: 2011
• Tom: Vol. 18, nr 1
• Strony: 35--46
• Opis fizyczny: Bibliogr. 9 poz., rys., tab., wykr.

Twórcy

autor

Adamczak S.

autor

Janusiewicz A.

autor

Makieła W.

autor

Stępień K.

• Kielce University of Technology, Chair of Mechanical Technology and Metrology, Al. 1000-lecia P. P. 7, 25-314 Kielce, Poland,

Bibliografia

• [1] Adamczak, S. (2008). Measurement of surface texture. Form profiles, waviness and roughness. Warsaw. WNT. (in Polish).
• [2] Jakubiec, W., Malinowski, J. (2004). Metrology of Geometrical Quantities. Warsaw: WNT. (in Polish).
• [3] Panda, A., Jurko, J. (2008). Bearings for pumps and compressors. Proceedings of the 12th International scientific and engineering conference Hervicon 2008. Kielce University of Technology. Poland, 271 - 275.
• [4] Adamczak, S., Janusiewicz, A. (2004). Determining the theoretical method error for measurement of roundness profiles on production machines. CEEPUS Science Report, Project PL-127, Measuring Technology in Advanced Manufacturing Systems. Kielce University of Technology, 21-31.
• [5] Adamczak, S., Michalski, D. (2004). Statistical Methods For Comparison of Measuring Instruments Accuracy. Metrology and Measurements Systems, 11 (3), 221-234.
• [6] Tiku, M.L. (1980). Goodness of fit statistics based on the spacings of complete or censored samples. Australian Journal of Statistics, 22, 260-275.
• [7] Whitehouse, D.J. (1994). Handbook of Surface Metrology. Institute of Physics. Bristol&Philadelphia.
• [8] Whitehouse, D. J. (2002). Surfaces and their measurement. London. HPS.
• [9] Adamczak, S., Michalski, D. (2002). SADCOM - user manual. Kielce University of Technology. (in Polish)