The influence of the ball material on the Brinell hardness

• Autorzy: Petrík J. , Mikloš V. , Špetuch V. , Tompoš T.
• Języki publikacji: EN

Abstrakty

EN

A Brinell hardness tester with carbide and steel balls was calibrated and thereafter the hardness of ten samples of steel STN 41 1600 was measured by four appraisers. The uncertainty of calibration and of the hardness measurement were calculated. The results obtained with carbide and steel balls were confronted using uncertainty analysis, measurement systems analysis (MSA), analysis of variance (ANOVA), unpaired t-test and Z-score. The calibrated hardness tester is not considered satisfactory because the values of relative expanded uncertainty of calibration (relative maximum permissible error) and maximum error exceed the values permitted by the standard for both balls. The statistically significant difference between the uncertainties and relative maximum error obtained by carbide and steel balls was not confirmed neither at calibration nor at measurement of steel sample hardness. Measurement system analysis confirmed some influence of used ball materials on the results of individual appraisers on the capability of the hardness measurement process (indices %AV, %GRR and ndc) in accordance with the results of the unpaired t-test.

Słowa kluczowe

EN

calibration; HBS; HBW; uncertainty; t-test; ANOVA; Z-score

• Wydawca: Komitet Metrologii i Aparatury Naukowej PAN
• Czasopismo: Metrology and Measurement Systems
• Rocznik: 2008
• Tom: Vol. 15, nr 3
• Strony: 317--327
• Opis fizyczny: Bibliogr. 13 poz., rys., tab., wykr.

Twórcy

autor

Petrík J.

autor

Mikloš V.

autor

Špetuch V.

autor

Tompoš T.

• Technical University of Košice, Faculty of Metallurgy, Slovakia,

Bibliografia

• 1. STN EN ISO 6506-1:2005. “Metallic materials. Brinell hardness test”. Part 1: Test method.
• 2. Veles, P.: Mechanick’e vlastnosti a skúšanie kovov. SNTL Praha/Bratislava 1985. (in Slovak).
• 3. STN EN ISO 6507-2:2005. “Metallic materials. Vickers hardness test”. Part 2: Verification and calibration of testing machines.
• 4. STN EN ISO 6506-2:2005. “Metallic materials. Brinell hardness test”. Part 2: Verification and calibration of testing machines.
• 5. Chajdiak, J.: Štatistika v exceli. Statis Bratislava 2002. ISBN 80-85659-27-1. (in Slovak).
• 6. Measurement systems analysis (MSA). Reference manual. Third edition. 2003.
• 7. Plura, J.: Plànovanì a neustálé zlepšovaní jakosti. Computer Press. Praha 2001. ISBN 80-7226-543-1.(in Czech).
• 8. Meloun, M., Militký, J.: Kompendium statistického zpracování dat. 1. vydanie. Praha: Academia, 2002. ISBN 80-200-1008-4. (in Czech).
• 9. Tobolski, E.: “Uncertainty in Hardness testing”. (part 2). Advanced materials & processes. vol 161, no. 5, 2003, pp. 25.
• 10. Petrík, J., Špet’uch, V.: “The Dependence of Hardness Measurement System Capability on the Time”. Transactions of the Universities of Košice, vol. 15, no 3, 2005, pp. 27-33, ISSN 1335-2334.
• 11. Petrík, J., Špet’uch, V.: “The dependence of brass hardness measurement system on the time”. Metrology and measurement systems. vol. 14, no. 4 ,2007, pp. 595-602. ISSN 0860-8229.
• 12. Mthodical guidelines for accreditation. Prificiency testing schemes. MSA 0113-98. Bratislava. SNAS, 1998. (in Slovak).
• 13. Palenčár, R. et al.: Štatistické metódy v metrologických a skúšobných laboratóriách. Bratislava. Grafické štúdio Ing. Peter Juriga, 2001, ISBN 80-968449-3-8. (in Slovak).