Metrological aspects in measurements of a spectrum generated as a result of switching an electric circuit

• Autorzy: Ruszel P.
• Języki publikacji: EN

Abstrakty

EN

This paper presents issues connected with experimentally specifying the envelope of spectral density of a signal which arises by the operation of switching an electric circuit. Furthermore, the paper discusses an applied method of dividing the spectra coming from the 'switch on' signal and the 'switch off' signal. Finally, there is also a description of results of numerical analyses and research work carried out by the author.

Słowa kluczowe

EN

electromagnetic compatibility; electric signal; frequency spectrum; measurements

• Wydawca: Komitet Metrologii i Aparatury Naukowej PAN
• Czasopismo: Metrology and Measurement Systems
• Rocznik: 2007
• Tom: Vol. 14, nr 2
• Strony: 241--255
• Opis fizyczny: Bibliogr. 24 poz., rys., tab., wykr.

Twórcy

autor

Ruszel P.

• Wroclaw University of Technology, Faculty of Fundamental Problems of Technology, Poland,

Bibliografia

• 1. Hołownia J.: A state Space Analysis Example of Transient Noise Generation in Electrical Circuits. IEEE Transaction on Electromagnetic Compatibility, vol. EMC-18, no. 3, pp. 97–105, August 1976.
• 2. Hołownia J.: General characteristics of impulsive noise caused by the operation of a switch. Materiały konferencyjne EMC, pp. 102–108, Zurich 1981.
• 3. Stecher M., Wolle J.: Automatic Test Receiver EVSP for 20 to 1300 MHz. News from Rohde & Schwarz, no. 102, pp. 4–8, 1993.
• 4. Müller K. O., Stecher M., Wolf J.: ESHS and ESVS new EMI test receivers for 9 kHz to 1000 MHz. News from Rohde & Schwarz (special edition), pp. 8–13, 1995.
• 5. Schreyer W., Stecher M.: Automatic and manual test receivers covering 9 kHz to 1300 MHz. News from Rohde & Schwarz (special edition), pp. 13–29, 1995.
• 6. Catalog „Test & Measurement Catalog 1996” Hewlett-Packard, 1996.
• 7. Catalog „Test & Measurement Products”, Rohde & Schwarz, 1999/2000.
• 8. Lyons R. G.: Introduction to digital signal processing. WKŁ, Warszawa, 2000 (in Polish).
• 9. Filipow L. J, Zimajew A. L.: Methods of analytical presentation of signals in electronics, WNT, Warszawa, 1969 (in Polish).
• 10. Materials of Hewlett-Packard EMC/EMI Seminar – Warsaw 1993 (in Polish).
• 11. Materials of Hewlett-Packard Seminar A Practical Approach to EMC Self-Certification, 1998 (in Polish).
• 12. Szabatin J.: Fundamentals of Signal Theory. WKŁ, Warszawa, 1982, (3rd ed. 2000) (in Polish).
• 13. Beauchamp K. G.: Signal processing by analog and digital methods. WNT, Warszawa, 1978 (in Polish).
• 14. Lyons R. G.: Introduction to digital signal processing. WKŁ, Warszawa, 2000 (in Polish).
• 15. Ruszel P.: Method and circuit for frequency spectrum measurement. Poland, Patent no. 170392, pp. 1–3 (in Polish).
• 16. Ruszel P.: Head for frequency spectrum measurement. Poland, Patent no. 170412, pp. 1–3 (in Polish).
• 17. Ott H. W.: Methods of interference and noise reduction in electronic circuits. WNT, Warszawa, 1979 (in Polish).
• 18. Hołownia J.: Disturbances generated in simplest circuits with an electronic switch. Archiwum Elektrotechniki, vol. XXV, no. 3, pp. 703–718, 1976 (in Polish).
• 19. Hołownia J.: Analysis of disturbances in the high tension circuit in spark ignition installations of combustion engines. Archiwum Elektrotechniki, vol. XXVI, no. 2, pp. 423–435, 1977 (in Polish).
• 20. Ruszel P.: Impedance analysis of a printed board supply circuit. Elektronika, no. 4, pp. 13–18, 2005 (in Polish).
• 21. Ruszel P.: The electric switch as the basic source of disturbamces in measuring equipment and systems. Identification and modelling of elementary sources of disturbances in electric and electronic equipment. Instytut Metrologii Elektrycznej Politechniki Wrocławskiej. Report from the SPR series, no. 289, pp. 1–77, 1994 (in Polish).
• 22. CP Clare Corporation – catalog data.
• 23. Leferink F. B. J.: Inductance calculation, method and equations. IEEE 1995, International Symposium on electromagnetic compatibility, Atlanta, 14–18 August 1995, pp. 16–22.
• 24. Ruszel P.: Sensors and transducers in industrial measurement systems. Investigation of the disturbance band (spectrum measurements) generated by semiconductor switches. Instytut Metrologii Elektrycznej Politechniki Wrocławskiej, Report SPR 356, pp. 1–65, 1997.